Writing to a Serial Port Post: 302922231

10 More Discussions You Might Find Interesting

1. Linux

urgent......Serial port

I think my serial port(on board) is not working ...... because when I am running same code on two machines its working good....but when my system comes into picture ....it doesnt show any output comming from serial port.......... can anybody tell me how to configure my serial port.........or to...

2. Solaris

Serial port not found

Hi, I am working with solaris 9,SUN-Blade-100 and I want to communicate with the Serial port.To check whether the port is working or not.I write code and when I execute the file,then I got the output-- According to this,serial port is not found.can anyone please tell me how to configure the...

3. Programming

How to tell if a string to serial port has been sent

I have a need to determine when a string has been completely sent via a serial port from a standard 'C' application. The code is as follows: SerialPort_Send = open (pPortString, O_WRONLY | O_NOCTTY | O_NONBLOCK); write (SerialPort_Send, pCommandString, strlen (pCommandString)); ...

4. AIX

Serial port in AIX

Hi, How can i configure my modem in AIX thru serial port (sa0-->tty0) I have two port serial card configured as sa0 I created tty1 which port is tty0 and which port is tty1 how can i know??

5. UNIX for Dummies Questions & Answers

Missing serial port

A neighbour's Ubuntu 10.04 machine has five serial ports, one on the motherboard and four on a PCI card. However, only four cards are showing: # dmesg | grep tty console enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ...

6. Shell Programming and Scripting

Need help with serial port

Hi, I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and...

7. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

8. Shell Programming and Scripting

reading from and writing to serial port

hello all, please any one can provide me the shell script to write data to /dev/ttyS1 and read responce from /dev/ttyS1 and compare the responce to some string .. thnxx ---------- Post updated at 03:35 PM ---------- Previous update was at 11:46 AM ---------- any body help me.. how do i...

9. Web Development

Setup Serial Port

I need to set a serial port to 9600 7E1. How do I accomplish this? I've tried every combination, with no luck.

10. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

LEARN ABOUT DEBIAN

ttysrv

TTYSRV(8)						      System Manager's Manual							 TTYSRV(8)

NAME

       ttysrv - connect to a serial port and log output

SYNOPSIS

       ttysrv [-o option] [-s sock] [-l log] -t tty [-b baud] [-p parity] [-w wordsize] [-i pidfile]

DESCRIPTION

       ttysrv  is  the backend for rconsole.  It connects to the serial port, handles the log file and waits for connections from rconsole to view
       what's happening on the serial console.

OPTIONS

       -t tty Specify which device to connect to.

       -s sock
	      The name of the socket to listen for connections from rconsole on.

       -o option
	      Specify any ttyios options to open the port with. Currently only nolocal is supported.

       -l log The logfile to write to. If not set then no log is kept.

       -b baud
	      Set the baud rate to talk to the port at. Defaults to 9600.

       -p parity
	      Set the parity for the serial port. Defaults to none.

       -w wordsize
	      Set the word size for the serial port. Defaults to 8 bits.

       -i pidfile
	      The file to write the pid of ttysrv to. If not specified no such file is written.

SEE ALSO

       rconsole(1), remote-tty(1).

AUTHOR

       rtty was written by Paul Vixie <vixie@isc.org>. This manual page was written by Jonathan McDowell <noodles@earth.li> for the Debian project
       (but may be used by others).

								   May 23, 2006 							 TTYSRV(8)

10 More Discussions You Might Find Interesting

1. Linux

urgent......Serial port

Discussion started by: arunchaudhary19

2. Solaris

Serial port not found

Discussion started by: smartgupta

3. Programming

How to tell if a string to serial port has been sent

Discussion started by: ExDes

4. AIX

Serial port in AIX

Discussion started by: pchangba