Writing to a Serial Port Post: 302921713

10 More Discussions You Might Find Interesting

1. Linux

urgent......Serial port

I think my serial port(on board) is not working ...... because when I am running same code on two machines its working good....but when my system comes into picture ....it doesnt show any output comming from serial port.......... can anybody tell me how to configure my serial port.........or to...

2. Solaris

Serial port not found

Hi, I am working with solaris 9,SUN-Blade-100 and I want to communicate with the Serial port.To check whether the port is working or not.I write code and when I execute the file,then I got the output-- According to this,serial port is not found.can anyone please tell me how to configure the...

3. Programming

How to tell if a string to serial port has been sent

I have a need to determine when a string has been completely sent via a serial port from a standard 'C' application. The code is as follows: SerialPort_Send = open (pPortString, O_WRONLY | O_NOCTTY | O_NONBLOCK); write (SerialPort_Send, pCommandString, strlen (pCommandString)); ...

4. AIX

Serial port in AIX

Hi, How can i configure my modem in AIX thru serial port (sa0-->tty0) I have two port serial card configured as sa0 I created tty1 which port is tty0 and which port is tty1 how can i know??

5. UNIX for Dummies Questions & Answers

Missing serial port

A neighbour's Ubuntu 10.04 machine has five serial ports, one on the motherboard and four on a PCI card. However, only four cards are showing: # dmesg | grep tty console enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ...

6. Shell Programming and Scripting

Need help with serial port

Hi, I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and...

7. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

8. Shell Programming and Scripting

reading from and writing to serial port

hello all, please any one can provide me the shell script to write data to /dev/ttyS1 and read responce from /dev/ttyS1 and compare the responce to some string .. thnxx ---------- Post updated at 03:35 PM ---------- Previous update was at 11:46 AM ---------- any body help me.. how do i...

9. Web Development

Setup Serial Port

I need to set a serial port to 9600 7E1. How do I accomplish this? I've tried every combination, with no luck.

10. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

LEARN ABOUT OPENSOLARIS

mp_setpathweight

MP_SetPathWeight(3MPAPI)			   Common Multipath Management Library Functions			  MP_SetPathWeight(3MPAPI)

NAME

       MP_SetPathWeight - set the weight of a path

SYNOPSIS

       cc [ flag... ] file... -lMPAPI [ library... ]
       #include <mpapi.h>

       MP_STATUS MP_SetPathWeight(MP_OID pathOid, MP_UINT32 weight);

PARAMETERS

       pathOid	  The object ID of the path logical unit.

       weight	  A weight that will be assigned to the path logical unit.

DESCRIPTION

       The MP_SetPathWeight() function sets the weight to be assigned to a particular path.

RETURN VALUES

       MP_STATUS_INVALID_OBJECT_TYPE

	   The pathOid does not specify any valid object type. This is most likely to happen if an uninitialized object ID is passed to the API.

       MP_STATUS_OBJECT_NOT_FOUND

	   The pathOid ownerID or object sequence number is invalid.

       MP_STATUS_INVALID_PARAMETER

	   The	pathOid  has  a type subfield other than MP_OBJECT_TYPE_PATH_LU, or when the weight parameter is greater than the plugin's maximum
	   weight property.

       MP_STATUS_SUCCESS

	   The operation is successful.

       MP_STATUS_FAILED

	   The operation failed.

       MP_STATUS_UNSUPPORTED

	   The driver does not support setting path weight.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Standard: ANSI  INCITS  412  |
       |			     |Multipath Management API	   |
       +-----------------------------+-----------------------------+
       |MT-Level		     |Safe			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       libMPAPI(3LIB), attributes(5)

       Multipath Management API Version 1.0

SunOS 5.11							    15 Feb 2006 					  MP_SetPathWeight(3MPAPI)

10 More Discussions You Might Find Interesting

1. Linux

urgent......Serial port

Discussion started by: arunchaudhary19

2. Solaris

Serial port not found

Discussion started by: smartgupta

3. Programming

How to tell if a string to serial port has been sent

Discussion started by: ExDes

4. AIX

Serial port in AIX

Discussion started by: pchangba