I think my serial port(on board) is not working ......
because when I am running same code on two machines its working good....but when my system comes into picture ....it doesnt show any output comming from serial port..........
can anybody tell me how to configure my serial port.........or to... (16 Replies)
Hi,
I am working with solaris 9,SUN-Blade-100 and I want to communicate with the Serial port.To check whether the port is working or not.I write code and when I execute the file,then I got the output--
According to this,serial port is not found.can anyone please tell me how to configure the... (1 Reply)
I have a need to determine when a string has been completely sent via a serial port from a standard 'C' application. The code is as follows:
SerialPort_Send = open (pPortString, O_WRONLY | O_NOCTTY | O_NONBLOCK);
write (SerialPort_Send, pCommandString, strlen (pCommandString));
... (2 Replies)
Hi,
How can i configure my modem in AIX thru serial port (sa0-->tty0)
I have two port serial card configured as sa0
I created tty1 which port is tty0 and which port is tty1 how can i know?? (1 Reply)
A neighbour's Ubuntu 10.04 machine has five serial ports, one on the motherboard and four on a PCI card. However, only four cards are showing:
# dmesg | grep tty
console enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
... (2 Replies)
Hi,
I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
hello all,
please any one can provide me the shell script to write data to /dev/ttyS1
and read responce from /dev/ttyS1 and compare the responce to some string ..
thnxx
---------- Post updated at 03:35 PM ---------- Previous update was at 11:46 AM ----------
any body help me..
how do i... (1 Reply)
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
LEARN ABOUT DEBIAN
m16c-flash
M16C-FLASH(1) General Commands Manual M16C-FLASH(1)NAME
m16c-flash - Flash programmer for Renesas M16C and R8C microcontrollers
SYNOPSIS
m16c-flash [COM_DEV] [CPU_TYPE] [FILE] [ID1:...:ID7] [OPTIONS]
DESCRIPTION
m16c-flash is a flash programmer for the Renesas M16C and R8C microcontrollers which operates in asynchronous mode.
OPTIONS
COM_DEV The serial device to use for flashing, e.g. /dev/ttyS0 or /dev/ttyUSB0.
CPU_TYPE The CPU type you want to flash to (currently M16C or R8C).
FILE The filename of the binary you want to flash.
ID1:...:ID7 The device ID.
--help Show a help text and exit.
--version Show version information and exit.
EXAMPLES
Flash the simple.s file onto an M16C microcontroller via the first serial port (/dev/ttyS0) using 0:0:0:0:0:0:0 as the device ID:
m16c-flash /dev/ttyS0 M16C simple.s 0:0:0:0:0:0:0
Flash the test.mot file onto an R8C microcontroller via the USB serial device /dev/ttyUSB0, and using ff:ff:ff:ff:ff:ff:ff as device ID:
m16c-flash /dev/ttyUSB0 R8C test.mot ff:ff:ff:ff:ff:ff:ff
BUGS
Please report any bugs to Thomas Fischl <tfischl@gmx.de>.
LICENCE
m16c-flash is covered by the GNU General Public License (GPL).
AUTHORS
Greg Reynolds <greg@lostintheether.net>
Jim Hawkridge <h046@eee-fs4.bham.ac.uk>
Thomas Fischl <tfischl@gmx.de>
This manual page was written by Uwe Hermann <uwe@hermann-uwe.de>, for the Debian GNU/Linux system (but may be used by others).
August 20, 2006 M16C-FLASH(1)