".can you copy the php snippet and run it on the command line as the user or group member that owns /dev/ttyS0..."
I'm sorry, I am a newbie. How??
---------- Post updated 10-19-14 at 04:47 PM ---------- Previous update was 10-18-14 at 09:27 PM ----------
Here is some more info -
Code:
root@meow:/dev# ls /dev/ttyS0
/dev/ttyS0
root@meow:/dev# echo test > /dev/ttyS0
root@meow:/dev# ls bla
ls: cannot access bla: No such file or directory
root@meow:/dev# touch bla
root@meow:/dev# ls -l bla
-rw-r--r-- 1 root root 0 Oct 18 22:55 bla
root@meow:/dev# echo test > /dev/ttyS0 >bla
root@meow:/dev# cat bla
test
root@meow:/dev# echo "W\n" > /dev/ttyS0 >bla
root@meow:/dev# cat bla
W\n
Therefore I can write to the port and read from it.
How do I get the output from the scale, which is called by W\n?
I think my serial port(on board) is not working ......
because when I am running same code on two machines its working good....but when my system comes into picture ....it doesnt show any output comming from serial port..........
can anybody tell me how to configure my serial port.........or to... (16 Replies)
Hi,
I am working with solaris 9,SUN-Blade-100 and I want to communicate with the Serial port.To check whether the port is working or not.I write code and when I execute the file,then I got the output--
According to this,serial port is not found.can anyone please tell me how to configure the... (1 Reply)
I have a need to determine when a string has been completely sent via a serial port from a standard 'C' application. The code is as follows:
SerialPort_Send = open (pPortString, O_WRONLY | O_NOCTTY | O_NONBLOCK);
write (SerialPort_Send, pCommandString, strlen (pCommandString));
... (2 Replies)
Hi,
How can i configure my modem in AIX thru serial port (sa0-->tty0)
I have two port serial card configured as sa0
I created tty1 which port is tty0 and which port is tty1 how can i know?? (1 Reply)
A neighbour's Ubuntu 10.04 machine has five serial ports, one on the motherboard and four on a PCI card. However, only four cards are showing:
# dmesg | grep tty
console enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
... (2 Replies)
Hi,
I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
hello all,
please any one can provide me the shell script to write data to /dev/ttyS1
and read responce from /dev/ttyS1 and compare the responce to some string ..
thnxx
---------- Post updated at 03:35 PM ---------- Previous update was at 11:46 AM ----------
any body help me..
how do i... (1 Reply)
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
LEARN ABOUT PHP
mem
MEM(4) Linux Programmer's Manual MEM(4)NAME
mem, kmem, port - system memory, kernel memory and system ports
DESCRIPTION
/dev/mem is a character device file that is an image of the main memory of the computer. It may be used, for example, to examine (and even
patch) the system.
Byte addresses in /dev/mem are interpreted as physical memory addresses. References to nonexistent locations cause errors to be returned.
Examining and patching is likely to lead to unexpected results when read-only or write-only bits are present.
Since Linux 2.6.26, and depending on the architecture, the CONFIG_STRICT_DEVMEM kernel configuration option limits the areas which can be
accessed through this file. For example: on x86, RAM access is not allowed but accessing memory-mapped PCI regions is.
It is typically created by:
mknod -m 660 /dev/mem c 1 1
chown root:kmem /dev/mem
The file /dev/kmem is the same as /dev/mem, except that the kernel virtual memory rather than physical memory is accessed. Since Linux
2.6.26, this file is available only if the CONFIG_DEVKMEM kernel configuration option is enabled.
It is typically created by:
mknod -m 640 /dev/kmem c 1 2
chown root:kmem /dev/kmem
/dev/port is similar to /dev/mem, but the I/O ports are accessed.
It is typically created by:
mknod -m 660 /dev/port c 1 4
chown root:kmem /dev/port
FILES
/dev/mem
/dev/kmem
/dev/port
SEE ALSO chown(1), mknod(1), ioperm(2)COLOPHON
This page is part of release 4.15 of the Linux man-pages project. A description of the project, information about reporting bugs, and the
latest version of this page, can be found at https://www.kernel.org/doc/man-pages/.
Linux 2015-01-02 MEM(4)