Sponsored Content
Full Discussion: Network routing
Operating Systems Solaris Network routing Post 302920818 by rbatte1 on Monday 13th of October 2014 07:43:20 AM
Old 10-13-2014
No need to apologise for not knowing. We all have to learn. Asking questions and showing your efforts is great. I hope that someone can help you as I'm guessing it's not working given that you are asking the question.

You are right that both ends will need to know how to send packets to the other, unless you are using UDP. The more usual TCP is a bit like sending a parcel with recorded-delivery so an acknowledgement is returned by the receiver. Using UDP is more like just sending a postcard and hoping from a holiday abroad it gets there.

I have two questions initially:-
  • Do you have a default route/gateway for all the traffic without a match in your list?
  • Can you give us the output from netstat -rn on server A too please?


Thanks, in advance,
Robin
 

9 More Discussions You Might Find Interesting

1. IP Networking

Routing Network Traffic With Mandrake

I am running Mandrake 8.0 (KDE ver 2.1.1) on a machine with 2 NICs. This is a college project. I am attempting to configure this machine as a firewall, and to pass packets from one network to another. Eth0 is on my external network. Eth1 is on my internal network. I set the gateway in "netconf"... (1 Reply)
Discussion started by: Deuce
1 Replies

2. UNIX for Dummies Questions & Answers

Need help to configure routing on home network

I have a Windows laptop and a Sparc desktop. I'm trying to toy around with routing. If have always on broadband from BT. My router ipaddress is: 192.168.1.1 This router uses DHCP. My Laptop Ip is as follows: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . :... (2 Replies)
Discussion started by: Kongowea
2 Replies

3. IP Networking

ssh server is attachable from local network not from another network

hello i have a ubuntu ssh server that i can acess from any of my comnputers but only if they are on the same wireless network as the server. i tested trhis my tehtehring my samsung blackjack to my windows partition and installing openssh to windows it works when windows is on the wireless but no... (1 Reply)
Discussion started by: old noob
1 Replies

4. Solaris

Network cards - Routing

Hi all I hate networking, I hate everything to do with it. Its something I do in anger in one contract, then forget. This is more of a question / than a problem. So, on a solaris 10 server, using older qfe cards, Ive got a sun truck with 4 nics (qfe0,3,4,7), and a ipmp pair (hemo0,qfe1).... (2 Replies)
Discussion started by: sbk1972
2 Replies

5. IP Networking

Routing traffic problem between 3G and Office Lan Network

Hi, I would like to ask some networking solution regarding my work LAN and 3G usb network problem. I want to route my internet traffic to the 3G network and sometimes connect to some of my work network for ssh to configure some workstation or print something. Currently my problem is i can't... (0 Replies)
Discussion started by: jao_madn
0 Replies

6. IP Networking

Test network routing algourithm

hi, I've wrote my own network routing algorithm in java, now i wanna test it and see if it works correctly, also i wanna test it's performance in comparison with other network routing algorithms like RIP. can anyone tell me how can i do this? is there any simulator or something for network routing... (0 Replies)
Discussion started by: gongotar
0 Replies

7. Solaris

No network cable But Network interface is UP and Running

I've one Netra 240 After changing main board and system configuration card reader, Network is not accessible any more, Network interfaces are always UP and Running even when there is no cable connected to Network interfaces. I tried to restart and plumb/unplumb with no luck. ifconfig -a... (7 Replies)
Discussion started by: samer.odeh
7 Replies

8. IP Networking

Test Network Routing Issues (FREEBSD and RHEL)

Hello, I'm attempting to setup a test network with a client-server based architecture using a proprietary application. The client works by communicating with the server on separate links (typically cellular connections) and then initiates a tunnel over each active link. However, in place of the... (0 Replies)
Discussion started by: shadyuk
0 Replies

9. Red Hat

Network becomes slow and return fast only after restart network

Hi, I have 2 machines in production environment: 1. redhat machine for application 2. DB machine (oracle) The application doing a lot of small read&writes from and to the DB machine. The problem is that after some few hours the network from the application to the DB becomes very slow and... (4 Replies)
Discussion started by: moshesa
4 Replies
UDP(4)							   BSD Kernel Interfaces Manual 						    UDP(4)

NAME
udp -- Internet User Datagram Protocol SYNOPSIS
#include <sys/socket.h> #include <netinet/in.h> int socket(AF_INET, SOCK_DGRAM, 0); DESCRIPTION
UDP is a simple, unreliable datagram protocol which is used to support the SOCK_DGRAM abstraction for the Internet protocol family. UDP sockets are connectionless, and are normally used with the sendto and recvfrom calls, though the connect(2) call may also be used to fix the destination for future packets (in which case the recv(2) or read(2) and send(2) or write(2) system calls may be used). UDP address formats are identical to those used by TCP. In particular UDP provides a port identifier in addition to the normal Internet address format. Note that the UDP port space is separate from the TCP port space (i.e. a UDP port may not be ``connected'' to a TCP port). In addition broadcast packets may be sent (assuming the underlying network supports this) by using a reserved ``broadcast address''; this address is network interface dependent. Options at the IP transport level may be used with UDP; see ip(4). DIAGNOSTICS
A socket operation may fail with one of the following errors returned: [EISCONN] when trying to establish a connection on a socket which already has one, or when trying to send a datagram with the destina- tion address specified and the socket is already connected; [ENOTCONN] when trying to send a datagram, but no destination address is specified, and the socket hasn't been connected; [ENOBUFS] when the system runs out of memory for an internal data structure; [EADDRINUSE] when an attempt is made to create a socket with a port which has already been allocated; [EADDRNOTAVAIL] when an attempt is made to create a socket with a network address for which no network interface exists. SEE ALSO
getsockopt(2), recv(2), send(2), socket(2), inet(4), intro(4), ip(4) HISTORY
The udp protocol appeared in 4.2BSD. 4.2 Berkeley Distribution June 5, 1993 4.2 Berkeley Distribution
All times are GMT -4. The time now is 01:43 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy