390MB of RAM isnt much... this system has a limit of 2GB... I should still have some RAM somewhere at home...
I think when you have time to spare we should go through slowly but keep in mind that years I havent touched one and my memory plays bad tricks lately
You would need to see if Ignite is installed:
Code:
which makerecovery
Only I seen many systems with the soft but the soft was not in the PATH, you will find it in /opt :
Code:
find / -name makerecovery -print
Then if someone can put some DDS in the drive to see if it works...
We need to know what are the mirror disks...
We can change the way the system uses its memory but for that I suppose /stand need to be bigger than its actual size (in /stand is there a vmunix.prev file ? ).
We need to see on what disk it boots and get a spare one in case ( they are getting rare and you will find mostly refurbished.
I gave away my lasts D class to CERN because they have a lot still running and need spares for another 6 months - 1 year, I learned by CERN you have to be carefull with the power supply, it has a special fan impossible to find on the market (but I have in my garage 2 D260 ...)
I think you had enough for today...
When I try to log in as root I get the following message
realloccg /: file system full sendmail :NO Queue:low on space (have 0,SMTP-DAEMON needs 101 in /var/spool/mqueue) What should I do? (1 Reply)
Hi All,
There was a background process running on a Solaris 2.8 machine, and appeared to have filled all available disk-space. I done a killall, and upon re-booting found that the file system had filled up, and will not boot as normal as a result. For example, I'm getting
/usr/adm/messages: No... (8 Replies)
Hi, I just started working with UNIX on an old semi-fossilized Sun workstation which I use to process LOTS of images,however, I just started to get an error message that the file system is full and then my shell tool or/and text editor freeze up. Help? (8 Replies)
I read the sticky and thought of a script I use on a regular basis. Since unless you patch/upgrade the df command on solaris you have a very tought time teling how full the system truly is.
Output looks like
$ biggest.sh /tmp
Filesystem kbytes used avail capacity Mounted... (0 Replies)
I am receving following Error message in /var/adm/messages
"NOTICE: alloc: /: file system full"
Disk space usage is as beklow:
df -k
$ Filesystem kbytes used avail capacity Mounted on
/dev/md/dsk/d10 76678257 56962561 18948914 76% /
/proc ... (8 Replies)
I have unix server with OS 5.8 ,,,
I tried ufsdump 0ua -f /dev/rmt/0 / to perform full system backup on tape but I failed could any one give a procedure for full system backup on solaris machine using tapes??? (1 Reply)
hello
Even though I am not out of inodes or of space, the /var/adm/messages shows messages:
file system full
I am doing now fcsk -m (400G) and I am still waiting to see the fragmentation results (should I add another option to df to have a faster output?)
Do you have any other hints... (6 Replies)
Hi,
In order to have a sand box machine that I could use to test some system changes before going to production state, I'd like to duplicate a working system to a virtual one. Ideally, I'd like to manage to do it this way :
- Make a full system backup excluding the user file system (this... (7 Replies)
Hey all,
What do you think mostly happened in the following situation?
I have a Red Hat 5.5 server. Someone, somehow, managed to get two .nfs000.... type files that totaled over a terabyte in size. I removed them and thought things were back to normal. Then I started getting complains from... (2 Replies)
Discussion started by: geelsu
2 Replies
LEARN ABOUT CENTOS
amtoc
AMTOC(8) System Administration Commands AMTOC(8)NAME
amtoc - generate TOC (Table Of Contents) for an Amanda run
SYNOPSIS
amtoc [-a] [-i] [-t] [-f file] [-s subs] [-w] [--] logfile
DESCRIPTION
Amtoc generates a table of contents for an Amanda run. It's a perl script (if you don't have perl, install it first!).
OPTIONS -a
The output file name will be label-of-the-tape.toc in the same directory as logfile.
-i
Display help about amtoc.
-t
Generate the output in tabular form.
-f file
Write the output to a file ('-' for stdout).
-s subs
Evaluate the output file name from subs, with $_ set to label-of-the-tape. The -a option is equivalent to -s 's/$_/.toc/'.
-w
Separate tapes with form-feeds and display blank lines before totals.
--
Marks the last option so the next parameter is the logfile.
logfile
(use '-' for stdin)
OUTPUT FORMAT
The standard output has five fields separated by two spaces:
# Server:/partition date level size[Kb]
0 daily-05: 19991005 - -
1 cuisun15:/cuisun15/home 19991005 1 96
2 cuinfs:/export/dentiste 19991005 1 96
...
103 cuisg11:/ 19991005 0 4139136
103 total: - - 16716288
In tabular format (-t), this would look like:
# Server:/partition date lev size[Kb]
0 daily-05: 19991005 - -
1 cuisun15:/cuisun15/home 19991005 1 96
2 cuinfs:/export/dentiste 19991005 1 96
...
103 cuisg11:/ 19991005 0 4139136
103 total: - - 16716288
USAGE
The easiest way to use it is to run amtoc right after amdump in the cron job:
amdump daily ; logdir=`amgetconf daily logdir` ; log=`ls -1t $logdir/log.*.[0-9] | head -1` ; amtoc -a $log
which will generate /usr/local/etc/amanda//daily/tape_label.toc. You may also want to call amtoc after an amflush.
SEE ALSO amanda(8), amdump(8), amflush(8), amgetconf(8)
The Amanda Wiki: : http://wiki.zmanda.com/
AUTHORS
Nicolas Mayencourt <Nicolas.Mayencourt@cui.unige.ch>
University of Geneva/Switzerland
Stefan G. Weichinger <sgw@amanda.org>
Amanda 3.3.3 01/10/2013 AMTOC(8)
10-10-2014
