Hi every body, i have the following problem :
I need to read incoming data from a serial port, this port has connected a weigth device to it that send the weigth and i need to read this data to my aplication, i had this problem in Window Enviroment and i resolve with a "C" routine, but in Unix... (1 Reply)
Hai there,
Can any one provide me with a ansi c source code for
opening com1 or com2 and read data. The port is connected to
another serial communication device on rs232 port.
The o/s is Sco Unix 5.0.6
Matter urgent
Viswanath (0 Replies)
dear sir,
pls. can you help me ? , my os is unix sco 5.0.4 and ,server dat derive (1,4gb)
not working, now i want to transfer my server data in other machine (unix/other possible) by serial port/other port comminication.
thanks
pankaj raval (2 Replies)
Hi,
I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
hello all,
please any one can provide me the shell script to write data to /dev/ttyS1
and read responce from /dev/ttyS1 and compare the responce to some string ..
thnxx
---------- Post updated at 03:35 PM ---------- Previous update was at 11:46 AM ----------
any body help me..
how do i... (1 Reply)
hi, I've a problem on my C/C++ program with Posix Library.
I have to read data from the serial but I have incorrect data, in fact I get a bunch of zeros:
"2953.3174, 2785.2126, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0 , 0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 ,... (24 Replies)
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
LEARN ABOUT DEBIAN
sredird
sredird(8) sredird sredird(8)NAME
sredird - RFC 2217 serial port server
SYNOPSIS
sredird [-i] log-level serial-device lock-file [poll-interval]
DESCRIPTION
This manual page documents briefly the sredird, program.
This program when run through inetd will use the RFC 2217 extensions to TELNET to implement serial commands over the TCP connection and
interface to a specified serial port.
OPTIONS
An optional first parameter is '-i' to enable compatability with Cisco IOS.
The first mandatory parameter is the log level for use in syslog. The next mandatory parameter is the device node for the serial device,
it must be a fully qualified path. The final mandatory parameter is the file name for the lock file to be used to prevent multiple
instances of sredird from talking to the serial port at the same time, or to allow sharing a port between modem and sredird.
EXAMPLE
Here is a configuration line for running it from inetd: sredir stream tcp nowait root /usr/sbin/tcpd /usr/sbin/sredird 5
/dev/modem /var/lock/LCK..modem
AUTHOR
This man page was written by Russell Coker <russell@coker.com.au>. May be freely used and distributed without restriction under the terms
of the GPL.
The sredird program was written by Denis Sbragion <d.sbragion@infotecna.it> and Jeffrey Altman <jaltman@columbia.edu>.
Russell Coker <russell@coker.com.au> 2.2.0 sredird(8)