10-03-2014
Quote:
Originally Posted by
jim mcnamara
I
Are there required MIB lists missing as a startup parameter for snmpd?
Thank you, Jim.
In fact all the MIB settings are in place (this is basically what the mentioned entries in
/etc/snmpdv3.conf do) and the quoted line with the
snmpinfo command proves that snmp is up and working as expected. I could have (and in fact - have) started
snmpwalk instead and it shows the whole MIB tree for HACMP being in place. The listing is quite long so i didn't post it but in fact it is there.
In addition, if SNMP would not be configured correctly in respect to HACMP then the
cldump should also not work, but does so. This is why i believe that SNMP is not the problem here but it is
the common problem if
clstat is not working so i posted the respective info beforehand.
bakunin
Last edited by bakunin; 10-03-2014 at 05:58 PM..
10 More Discussions You Might Find Interesting
1. AIX
Hello,
I was wondering if I have 3 nodes (A, B, C) all configured to startup with HACMP, but I would like to configure HACMP in such a way:
1) Node B should startup first. After the cluster successfully starts up and mounts all the filesystems, then
2) Node A, and Node C should startup !
... (4 Replies)
Discussion started by: filosophizer
4 Replies
2. AIX
This post just as a follow-up for thread https://www.unix.com/aix/115548-hacmp-5-4-aix-5300-10-not-working.html: there was a bug in the clcomdES that would cause the Two-Node-Cluster-Configuration-Assistant to fail even with a correct TCP/IP adapter setup. That affected HACMP 5.4.1 in combinatin... (0 Replies)
Discussion started by: shockneck
0 Replies
3. AIX
Hi
What is the procedure to upgrade the MQ from 6 to 7 in aix hacmp cluster. Do i need to bring down the cluster
services running in both the nodes and then give #smitty installp in both the nodes separately. Please assist... (0 Replies)
Discussion started by: samsungsamsung
0 Replies
4. AIX
Hi all,
I was wondering if someone direct me in how to Make system backup for 2 nodes HACMP cluster ( system image ) .
What are the consideration for this task (3 Replies)
Discussion started by: h@foorsa.biz
3 Replies
5. AIX
Hi,
I have a IBM Power series machine that has 2 VIOs and hosting 20 LPARS.
I have two LPARs on which GPFS is configured (4-5 disks)
Now these two LPARs need to be configured for HACMP (PowerHA) as well.
What is recommended? Is it possible that HACMP can be done on this config or do i... (1 Reply)
Discussion started by: aixromeo
1 Replies
6. AIX
Hi
I'm a little rusty with HACMP, but wanted to find out if it is possible to remove a disk heartbeat network from a running HACMP cluster.
Reason is, I need to migrate all the SAN disk, so the current heartbeat disk will be disappearing. Ideally, I'd like to avoid taking the cluster down to... (2 Replies)
Discussion started by: cmcbugg
2 Replies
7. AIX
As i have updated a lot of HACMP-nodes lately the question arises how to do it with minimal downtime. Of course it is easily possible to have a downtime and do the version update during this. In the best of worlds you always get the downtime you need - unfortunately we have yet to find this best of... (4 Replies)
Discussion started by: bakunin
4 Replies
8. AIX
Hi,
A customer I'm supporting once upon a time broke their 2 cluster node database servers so they could use the 2nd standby node for something else. Now sometime later they want to bring the 2nd node back into the cluster for resilance. Problem is there are now 3 VG's that have been set-up... (1 Reply)
Discussion started by: elcounto
1 Replies
9. AIX
Hi all,
I remember way back in some old environment, having the HA cluster services not being started automatically at startup, ie. no entry in /etc/inittab.
I remember reason was (taken a 2 node active/passive cluster), to avoid having a backup node being booted, so that it will not... (4 Replies)
Discussion started by: zaxxon
4 Replies
10. AIX
HACMP two-node cluster with mirrored LVM.
HACMP two-node cluster with two SAN storages mirrored using LVM. Configured 2 disk heartbeat networks - 1 per each SAN storage. While performing redundancy tests. Once one of SAN storage is down - cluster is going to ERROR state. What are the guidelines... (2 Replies)
Discussion started by: OdilPVC
2 Replies
LEARN ABOUT DEBIAN
crm_mon
PACEMAKER(8) System Administration Utilities PACEMAKER(8)
NAME
Pacemaker - Part of the Pacemaker cluster resource manager
SYNOPSIS
crm_mon mode [options]
DESCRIPTION
crm_mon - Provides a summary of cluster's current state.
Outputs varying levels of detail in a number of different formats.
OPTIONS
-?, --help
This text
-$, --version
Version information
-V, --verbose
Increase debug output
-Q, --quiet
Display only essential output
Modes:
-h, --as-html=value
Write cluster status to the named html file
-X, --as-xml
Write cluster status as xml to stdout.
-w, --web-cgi
Web mode with output suitable for cgi
-s, --simple-status
Display the cluster status once as a simple one line output (suitable for nagios)
-S, --snmp-traps=value Send SNMP traps to this station
-C, --snmp-community=value
Specify community for SNMP traps(default is NULL)
-T, --mail-to=value
Send Mail alerts to this user. See also --mail-from, --mail-host, --mail-prefix
Display Options:
-n, --group-by-node
Group resources by node
-r, --inactive
Display inactive resources
-f, --failcounts
Display resource fail counts
-o, --operations
Display resource operation history
-t, --timing-details
Display resource operation history with timing details
-A, --show-node-attributes
Display node attributes
-c, --tickets
Display cluster tickets
Additional Options:
-i, --interval=value
Update frequency in seconds
-1, --one-shot
Display the cluster status once on the console and exit
-N, --disable-ncurses
Disable the use of ncurses
-d, --daemonize
Run in the background as a daemon
-p, --pid-file=value
(Advanced) Daemon pid file location
-F, --mail-from=value
Mail alerts should come from the named user
-H, --mail-host=value
Mail alerts should be sent via the named host
-P, --mail-prefix=value
Subjects for mail alerts should start with this string
-E, --external-agent=value
A program to run when resource operations take place.
-e, --external-recipient=value A recipient for your program (assuming you want the program to send something to someone).
EXAMPLES
Display the cluster status on the console with updates as they occur:
# crm_mon
Display the cluster status on the console just once then exit:
# crm_mon -1
Display your cluster status, group resources by node, and include inactive resources in the list:
# crm_mon --group-by-node --inactive
Start crm_mon as a background daemon and have it write the cluster status to an HTML file:
# crm_mon --daemonize --as-html /path/to/docroot/filename.html
Start crm_mon and export the current cluster status as xml to stdout, then exit.:
# crm_mon --one-shot --as-xml
Start crm_mon as a background daemon and have it send email alerts:
# crm_mon --daemonize --mail-to user@example.com --mail-host mail.example.com
Start crm_mon as a background daemon and have it send SNMP alerts:
# crm_mon --daemonize --snmp-traps snmptrapd.example.com
AUTHOR
Written by Andrew Beekhof
REPORTING BUGS
Report bugs to pacemaker@oss.clusterlabs.org
Pacemaker 1.1.7 April 2012 PACEMAKER(8)