Our old E5500 was just turned off (planned :rolleyes: ) and the application was moved to a V480.
Now if I login to the V480 and try to sudo to root my connection hangs, and I can not telnet to the E5500 after it was powered on again. I get "connection refused". Telnet to this machine was... (5 Replies)
Hi ,
i am a beginner in AIX.
please find my doubt
I am calling the below script named test_1 by " sh test_1 | telnet "
cmd1="var1=100"
echo open $Infahost
sleep 1
echo $Infaftplogin
sleep 1
echo $Infaftppasswd
sleep 1
echo $cmd1
sleep 5
echo $var1
sleep 5
echo exit (11 Replies)
Hi All,
I am working on AIX 5.3.
My requirement is to telnet to a server and scp a file from another server
In my shell script i am using telnet to enter to a server and i am echoing the password as below
echo open $Infahost
sleep 1
echo $Infaftplogin
sleep 1
echo $Infaftppasswd... (3 Replies)
Hi,
Whenever i am trying to telnet to server i am getting frequent error
Authorized Login: prtsrc's Password:
/dev/pts/171: Password read timed out -- possible noise on port
when i am rerunning the same it is working fine
thanks,
sam (2 Replies)
hi this is hrushi i have issue regarding solaris(9 version)
when i telnet from solaris to linux machine it displaying message like connection closed by forine host ...when i telnet from linux to solaris its working fine ...help me its urgent and i'm new to solaris 9 (2 Replies)
Hi Experts,
I am using perl to telnet on cisco boxes. We have this stupid cisco node which does not support "terminal Length0" command.
Since I am using Net::Telnet and capturing output with
@output = $telnet->cmd('cmd');
Say
@output = $telnet->cmd('show version');
Now problem... (2 Replies)
Greetings! My name is Jerry. I am a long time IBM i-series (AS/400) admin. I am the solo IT guy at a $50M company, we run mostly Windows servers on virtual machines, I do have one i-series, and one p-series.
Recently, we have decided to go with a legacy product that is proven and bulletproof, it... (0 Replies)
Hi Gurus,
I have solaris 10 server where I can telnet to one host and port <20011> with no problem..but when I am trying to telnet to another host same port (port is listening) I am not getting any success...it just says trying....
Now that I have both hosts listed in the /etc/hosts file,... (4 Replies)
Hi,
Recently I've been working a lot with telnet for various reasons (obsolete, I realise). However, I've run into an issue.
With most telnet clients, login is possible. However, with a few, typing is possible until I try to hit enter. For example, I try to type "admin" as the username and... (5 Replies)
In the below script, i want to check telnet port status of list of servers, here where ever port working i am getting output. where ever port is not working (where ever trying) there it's command stuck, there it's needed manual interruption like ctrl+c.
without interception i want run this... (1 Reply)
Discussion started by: rajiv
1 Replies
LEARN ABOUT MOJAVE
usoc
usoc(7D) Devices usoc(7D)NAME
usoc - universal serial optical controller for Fibre Channel arbitrated loop (SOC+) device driver
DESCRIPTION
The Fibre Channel adapter is an SBus card that implements two full duplex Fibre Channel interfaces. Each interface can connect to a Fibre
Channel arbitrated loop (FC-AL). The usoc device driver is a nexus driver and implements portions of the FC-2 and FC-4 layers of FC-AL.
FILES
/kernel/drv/usoc
32-bit ELF kernel module
/kernel/drv/sparcv9/usoc
64-bit ELF kernel module
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |SPARC |
+-----------------------------+-----------------------------+
|Interface stability |Unknown |
+-----------------------------+-----------------------------+
|Availability |SUNWusoc |
+-----------------------------+-----------------------------+
SEE ALSO fctl(7D), sbus(4), fcp(7D), fp(7D), ssd(7D)
Writing Device Drivers
Fibre Channel Physical and Signaling Interface (FC-PH) ANSI X3.230: 1994
Fibre Channel Arbitrated Loop (FC-AL) ANSI X3.272-1996
Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA) NCITS TR-19:1998
Fabric Channel Loop Attachment (FC-FLA), NCITS TR-20:1998
DIAGNOSTICS
The following messages are logged and may also appear on the system console. On the console these messages are preceded by:
usoc%d:
where
usoc%d:
is the per-port instance number of the usoc controller.
Fibre Channel is ONLINE
The Fibre Channel loop is now online.
Fibre Channel Loop is ONLINE
The Fibre Channel loop is now online.
Fibre Channel Loop is OFFLINE
The Fibre Channel loop is now offline.
attach failed: device in slave-only slot.
Move soc+ card to another slot.
attach failed: alloc soft state.
Driver did not attach, devices will be inaccessible.
attach failed: bad soft state.
Driver did not attach, devices will be inaccessible.
attach failed: unable to map eeprom
Driver was unable to map device memory; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
attach failed: unable to map XRAM
Driver was unable to map device memory; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
attach failed: unable to map registers
Driver was unable to map device registers; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
attach failed: unable to access status register
Driver was unable to map device registers; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
attach failed: unable to install interrupt handler
Driver was not able to add the interrupt routine to the kernel. Driver did not attach to device, devices will be inaccessible.
attach failed: unable to access host adapter XRAM
Driver was unable to access device RAM; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
attach failed: unable to write host adapter XRAM
Driver was unable to write device RAM; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
attach failed: read/write mismatch in XRAM
Driver was unable to verify device RAM; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
SunOS 5.10 20 Jul 1999 usoc(7D)