The missing entry in mdadm.conf is a problem - but probably not the cause of your issue. But to eliminate it you should update the file and re-run the test.
You can I think get the correct information by running,
Also a quick question, how have you created the "virtual drives"?
I am having some troubles with apt-get. I did an apt-get update and an apt-get upgrade. Some dependencies did not download, and so I had to do `apt-get -f install` to fix that. The thing is I get an error about /var/lib/dpkg/available
root@hayek:~# apt-get -f install
Reading package lists...... (3 Replies)
Hi folks,
I am self-learning as I can
I have a script that has read a file into an array.
I can read out each line in the array with the code:
for INDEX in {0..$LENGTH} ## $LENGTH was determined at the read in
do
echo "${data}"
done
What I need to do is test the first char... (2 Replies)
Hi all,
I am looking for a quick/short way in awk to check if an associative array has any content.
I know I can split() it to an indexed array and check if the 1st element is set, or cycle through it with something like for( ele in arr ), but I want to avoid that, as I am looking for a shorter... (3 Replies)
Hi everyone,
I am trying to prevent the ehci_hcd kernel module to load at boot time.
Here's what I've tried so far:
1) Add the following line to /etc/modprobe.d/blacklist.conf (as suggested here):
2) Blacklisted the module by adding the following string to
3) Tried to blacklist the module... (0 Replies)
Hi,
another little question...
"sn" is an array whose elements can vary from about 55,000 to about 150,000 elements. Each element consists of an integer between 0-255, eg: ${sn} contain the value: 103 . For a decrypt-procedure I need scroll all the elements 4 or 5 times. Here is an example of... (15 Replies)
Hi Folks,
Could anyone please assist me with the what could be the scenarios to test the file system mount/umount performance check in HPUX.
Thanks in advance,
Vaishey (5 Replies)
Hello,
P7 machine
PCI Express x8 Planar 3Gb SAS Adapter
RAID10 array(2 disks)(not AIX lvm) was configured and working, then one disk failed and IBM support replaced that. Now raid array is degraded, data is not lost. I see new disk model(same as original) serial and etc.
What I did trying... (0 Replies)
Ya, I know, who in this day and age is mirroring rootvg...?
But yes, my shop does and I need to script checking for it.
I also know I could just inverse the the logic and call the LV mirrored
if the LPs and PPs were not equal. But I want to do the math in the if test
and also know I could... (5 Replies)
Discussion started by: gtsonoma
5 Replies
LEARN ABOUT DEBIAN
array-info
array-info(1)array-info(1)NAME
array-info - check the status of a HP (Compaq) SmartArray controller
SYNOPSIS
array-info -d array_device_path [-a|-l|-A|-c|-s|-L|-h]
DESCRIPTION
Array-info is a command line tool to retrieve informations and logical drives status from several RAID controllers (currently HP Compaq IDA
and CISS and MD). It displays informations about the firmware version, Rom revision, number of physical and logical drives on the con-
troller, aswell as the fault tolerance, size, number of physical disks and status for each logical drive.
OPTIONS --device | -d
Path to array device, e.g. /dev/ida/c0d0 or /dev/cciss/c0d1
--all-drives | -a
Show informations about all drives
--logical drive | -l
Show informations about selected logical drive
--show-ctrl | -c
Show informations about controller
--show-logical | -L
Show informations about logical drives
--show-physical | -p
Show physical device informations
--show-status | -s
Show status of logical drives
--show-all | -A
Show all informations
--version | -V
Show version
-h Show help about options
COPYRIGHT
This manual page was written by Raphael Pinson <<raphink@ubuntu.com>>. Permission is granted to copy, distribute and/or modify this docu-
ment under the terms of the GNU General Public License, Version 2 or any later version published by the Free Software Foundation.
2006-12-15 array-info(1)