I have been observing a slow but gradual decline in system response on an OS X server over the last 2 weeks. This is a single purpose application server for Backups on the LAN (all wired) and all ssh invoked scripts via an 'rsync pull'. All that is working fine. There have been no changes to the base config, no additional users and all recent patches successfully installed. I have been manually rotating the logs in/var/log and tailing system.log to try and catch what might be happening but the ply thing that jumps out of that page is this:
NB: We rae not on a 17.x network - could this be what is dragging the server down and if so, any ideas where the connect call might have come from?
Thank you in advance.
---------- Post updated at 11:59 AM ---------- Previous update was at 11:58 AM ----------
typo: the only thing that jumps out... (sorry)
---------- Post updated at 12:07 PM ---------- Previous update was at 11:59 AM ----------
I think the item above relates to ipV6, which on the server is configured for automatic. If that is the case, then do I need ipV6 anabled. (apologies for typo's above).
Last edited by Scrutinizer; 09-21-2014 at 04:19 PM..
Reason: code tags
I am using shell script to do secure ftp. I have done key file setup to do password less authentication. Following are the FTP Details:
FTP Client has Sun SSH.
FTP Server has F-Secure.
I am using SCP Command to do secure copy files. When I am doing this, I am getting the foll error
scp:... (2 Replies)
request
create a chat system in linux where a user type smth and all the other users connected to server get the message.then a user have to create join leave or delete a channel of chat if he created it.i did the server and the client but i dont know how to implemt the chat rooms.i was ... (1 Reply)
Hello All,
I have a SCO Unix server and when I do the command
"df -kP" I get the following:
Filesystem 1024-blocks Used Available Capacity Mounted on
/dev/root 2048000 934936 1113064 46% /
/dev/boot 15360 6419 8941 42% /stand
It should say
Filesystem 1024-blocks Used Available... (4 Replies)
=========================================================
Errrr previously post: https://www.unix.com/sco/140055-sco-open-server-6-system-halt.html
Then I think it's better to post here. If I wrong, please ignore.
=========================================================
Dear All,
Newbie... (1 Reply)
Dear All,
Newbie here, hope my post goes to the correct room.
System: SCO Open Server 6.0
Everything running well, after this Sunday morning noone can login via telnet or via putty, the system suddenly reject without any message (and also ftp). The local IT Support there (without enough... (2 Replies)
Hi all
I wonder if its possible to mount on a hp-ux server a file system that was previously mounted on a solaris 10 server. The LUN is on NetApp stoarge.
The problem on hp-ux I cannot do pvcreate on the lun (disk) because contains data.
Any help will be appreciated
FR (2 Replies)
Hi there
I've bought a used System p 9115-505. When I attach the LAN cable to my router the HMC receives an IP address from my router, but the HMC is unreachable. There are no open ports.
Does anybody know that problem?
Any help greatly appreciated. Greetings from Italy! (2 Replies)
Hello,
I have a legacy system that is running on SCO OpenServer 5.0.6, and the hardware is becoming a little sketchy. I replaced the hard drive about a year ago, and was able to come back from a tape backup of my entire system. I have been successful with building a VM with VMware Workstation,... (42 Replies)
Discussion started by: spock9458
42 Replies
LEARN ABOUT DEBIAN
ntpd.conf
NTPD.CONF(5) File Formats Manual NTPD.CONF(5)NAME
ntpd.conf - Network Time Protocol daemon configuration file
DESCRIPTION
This manual page describes the format of the ntpd(8) configuration file.
The optional weight keyword permits finer control over the relative importance of time sources (servers or sensor devices). Weights are
specified in the range 1 to 10; if no weight is given, the default is 1. A server with a weight of 5, for example, will have five times
more influence on time offset calculation than a server with a weight of 1.
ntpd.conf has the following format:
Empty lines and lines beginning with the `#' character are ignored.
Keywords may be specified multiple times within the configuration file. They are as follows:
listen on address
OpenNTPd has the ability to sync the local clock to remote NTP servers and, if this directive is specified, can act as NTP server
itself, redistributing the local clock.
Specify a local IP address or a hostname the ntpd(8) daemon should listen on to enable remote clients synchronization. If it
appears multiple times, ntpd(8) will listen on each given address. If `*' is given as an address, ntpd(8) will listen on all local
addresses. ntpd(8) does not listen on any address by default. For example:
listen on *
or
listen on 127.0.0.1
listen on ::1
sensor device [correction microseconds] [weight weight-value]
Specify a timedelta sensor device ntpd(8) should use. The sensor can be specified multiple times: ntpd(8) will use each given sen-
sor that actually exists. Non-existent sensors are ignored. If `*' is given as device name, ntpd(8) will use all timedelta sensors
it finds. ntpd(8) does not use any timedelta sensor by default. For example:
sensor *
sensor udcf0
An optional correction in microseconds can be given to compensate for the sensor's offset. The maximum correction is 127 seconds.
For example, if a DCF77 receiver is lagging 15ms behind actual time:
sensor udcf0 correction 15000
server address [weight weight-value]
Specify the IP address or the hostname of an NTP server to synchronize to. If it appears multiple times, ntpd(8) will try to syn-
chronize to all of the servers specified. If a hostname resolves to multiple IPv4 and/or IPv6 addresses, ntpd(8) uses the first
address. If it does not get a reply, ntpd(8) retries with the next address and continues to do so until a working address is found.
For example:
server 10.0.0.2 weight 5
server ntp.example.org weight 1
To provide redundancy, it is good practice to configure multiple servers. In general, best accuracy is obtained by using servers
that have a low network latency.
servers address [weight weight-value]
As with server, specify the IP address or hostname of an NTP server to synchronize to. If it appears multiple times, ntpd(8) will
try to synchronize to all of the servers specified. Should the hostname resolve to multiple IP addresses, ntpd(8) will try to syn-
chronize to all of them. For example:
servers pool.ntp.org
FILES
/etc/openntpd/ntpd.conf
default ntpd(8) configuration file
SEE ALSO ntpd(8), sysctl(8)HISTORY
The ntpd.conf file format first appeared in OpenBSD 3.6 .
$Mdocdate: October 2 2007 $ NTPD.CONF(5)