Hey Perderabo, thanks for the reply, very much appreciated!
I apologize for not responding to your post, but I had gotten pulled off this thing with mgetty that I was working on
and am just coming back around to it now... Again sorry for not getting back to you sooner.
Humm... Oh ok, when I had read the man page I guess I didn't put it together that the -m option for the initialization
string was where you would enter those commands. Doohh!!
And I guess I didn't see the AT Command example they use right below that -m option's section, which showed:
Basically, I will be connecting to this USB Modem over the phone network from my PC to a computer in a remote
location (*which will contain the USB Modem). In my successful tests, I used Minicom on my PC (*the client) and
dialed the Modems Telephone number (*using ATD55555...), then on the server side (*the computer with the USB
Modem) would be running mgetty and would answer the incoming call from my PC and I would then be
prompted with a login prompt from the server-side's computer. And after logging in I get that server's Console/CLI.
Modem: Zoom 56k USB Modem (*Model 3095) - which works great BTW... Computer w/ USB Modem:CuBox-i, running OpenSuSE 13.1 *for ARMv7
The ONLY thing I'm really having trouble with now is trying to get mgetty to start-up at boot time. OpenSuSE 13.1 uses systemd instead of inittab which is where I am used to starting things during boot. When I test mgetty from the CLI
and I watch it's log file (*/var/log/mgetty.ttyACM0) even though it's working when I run it from the CLI, I can see in
the log that it says:
Quote:
09/18 12:20:14 CM0 WARNING: parent process not init(pid=1), but pid=3353 (-bash)
..................
.......
......other stuff.....
.......
..................
09/18 12:22:51 CM0 cannot set controlling tty (ioctl): Operation not permitted
09/18 12:22:51 CM0 >>> this might be caused because you have run mgetty/vgetty
09/18 12:22:51 CM0 >>> from the command line. Don't do that, use /etc/inittab!
So now I'm trying to figure out how to use systemd since this is my 1st time attempting to use it. So far as I can tell
I need to have some kind of mgetty.service file located in /etc/systemd/system/*.... But it's starting to get a little
confusing with the .conf, .target and .service files...
Do you have any experience creating your own custom systemd files to start a program during boot?
Again, thanks alot for your reply it is much appreciated, and I apologize for taking so long to get back to you...
Hi,
I am an absolute beginner in Unix and I need to send a commands to a program
I have created a script that will let me login to the program, however, i cannot get the script to send commands to this program.
When the cript logs into the program, the display/ prompt is as follows:
1>... (1 Reply)
We're using Kermit 8.0.209 in Linux environment. We're trying to invoke kermit from an application, send some AT commands and receive the responses from the End terminals like mobiles/modems. We access these deivces through serial ports.
For eg., to send a file we use command-line options like... (4 Replies)
Hi,
i want to create a script which should do the following:
1) ping the remote servers and email the hosts which are down
2) netstat on port x on 2 server and email the result too.
I want both results to be sent in the same email.
I have few ideas but i can't finish it.
Here... (4 Replies)
Hi,
I'm trying to make an SSH into a SGSN node and collect some commands printouts.:confused:
I really don't know how this can be done.
I think it must be like this:
#!/bin/bash
ssh user@192.168.88.10
Then I must enter the password, but I don't know how to do it, I tried with:
echo... (3 Replies)
Dear friends
I'm looking for a solution to log all commands that users do in my RedHat box, and send it out to other remote server,
Is there any guide for that
Thanks
---------- Post updated at 04:20 AM ---------- Previous update was at 03:47 AM ----------
I can think of something else
I... (7 Replies)
Hi there
I found the Command to send commands to other servers like:
sv01> ssh user@sv02 'ps -ef'
But I cant use Variables from a script i want to execute on another server like:
sv01> ssh user@sv02 'cd $SCRIPTHOME'
although the variable is set on sv01.
How can I run commands on sv02 with... (2 Replies)
hey guys,
I've done some searching and other than winexe I haven't been able to find a way to send remote commands to a windows machine. The problem I get is with winexe whenever you send the process to the background in a script, I get the following error. :wall: Any help is appreciated!
... (0 Replies)
Hello All,
OS: openSUSE 13.1 (Bottle) (armv7hl)
uname -a: Linux linux.site 3.14.14-cubox-i #1 SMP Sat Sep 13 03:48:24 UTC 2014 armv7l armv7l armv7l GNU/Linux
So this is my first attempt at starting a service at boot with systemd. I've done this with inittab in the past,
but I'm having... (0 Replies)
Hello All,
mgetty Version: 1.1.36
OS: OpenSuSE 13.1 (armv7l)
Modem: Zoom 56K USB Modem Model 3095
So I've been playing with mgetty for weeks now testing dialing into the USB modem from another PC using the same modem and connecting
using minicom (*minicom ---dials to---> mgetty). I had... (3 Replies)