Hi,
Should this be a scalable resource or a failover resource in the cluster, also you'll have to give us some more information.
But in general just creating the mount point with;
Then you would configure the resource with;
Edit the /etc/vfstab to add the mount point, make sure to newfs the file systems before mounting the filesystem on all or each of the cluster nodes.Then run;
But I would say if you are not experienced with Cluster 3.2, invoulve your sysadmin and count on his cluster experience - the guidance is invaluable.
Clusters are generally there for a reason and breaking one will make you extremely unpopular.
Anyone know of a guide or instructions for Solaris
I got to configure a SBUS HBA to talk to a tape robot.
I have done this on a switch but not point to point.
just going HBA >>>>> TAPE Fibre simple two nodes
Kie (6 Replies)
I have rcently setup a 4 node cluster running sun cluster 3.2
and I have installed 4 zones on each node. when installing the zones I had to install the zone on all nodes the on the last node do a zlogin -C <zonename>
this worked ok.
theni I tried to siwitch the zone to node a thei work... (14 Replies)
Yesterday my customer told me to expect a vcs upgrade to happen in the future. He also plans to stop using HDS and move to EMC.
Am thinking how to migrate to sun cluster setup instead.
My plan as follows leave the existing vcs intact as a fallback plan.
Then install and build suncluster on... (5 Replies)
have a pair of sun servers, wanting to test drive a
2-node cluster using both software..
would like disable one of these cluster software while the othe is running..
Is it feasible at all ?? (2 Replies)
Hello. I am Running AIX 6.1 and PowerHA 6.1
I have an active/active cluster (Prod/Dev) cluster. Each side will failover to the other.
I have on my prod side an active volume group with a file system. The VG is imported on both nodes and active (varried on, file system mounted) on the prod... (3 Replies)
Hello experts -
I am planning to install a Sun cluster 4.0 zone cluster fail-over. few basic doubts.
(1) Where should i install the cluster s/w binaries ?. ( global zone or the container zone where i am planning to install the zone fail-over)
(2) Or should i perform the installation on... (0 Replies)
Hi,
What is the procedure require to add the luns to the mount point in linux server.
say for example due to lack of space in the mount point /u03,i want to add
some extra 20gb space to mount point, how to add that ?
What does luns means ?
Regards,
Maddy (5 Replies)
What's the best way clusters for Storage at some point? (The way that data is the same in all parts)
To set up a Web server cluster is the logical way?!
Cluster database and Storage and then by keepalived + HA cluster will be communicated?
Or, there a better solution? (For about 4 points)
Thank... (0 Replies)
How to create a new mount point with 600GB and add 350 GBexisting mount point
Best if there step that i can follow or execute before i mount or add diskspace IN AIX
Thanks (2 Replies)
Discussion started by: Thilagarajan
2 Replies
LEARN ABOUT OPENSOLARIS
scversions
scversions(1M) System Administration Commands scversions(1M)NAME
scversions - Sun Cluster version management
SYNOPSIS
scversions [-c]
DESCRIPTION
Note -
Beginning with the Sun Cluster 3.2 release, Sun Cluster software includes an object-oriented command set. Although Sun Cluster software
still supports the original command set, Sun Cluster procedural documentation uses only the object-oriented command set. For more infor-
mation about the object-oriented command set, see the Intro(1CL) man page.
The scversions command commits the cluster to a new level of functionality after a rolling-upgrade to new Sun Cluster software. With no
arguments, the scversions command prints a message indicating whether a commitment is needed.
OPERANDS
The following operands are supported:
-c Commit the set of nodes that are currently active members of the cluster to the highest possible level of functionality.
When you upgrade a node (either through upgrade to a new release of the product or by application of a patch) and boot it back
into the cluster, some of the internal protocols on that node might have to run at lower versions in order to cooperate cor-
rectly with other nodes in the cluster. When the cluster is in this state, some administrative actions might be disabled and
some new functionality introduced in the upgrade might be unavailable.
When you run this command once from any node after all nodes are upgraded, the cluster switches to the highest versions of
internal protocols possible. Assuming that all nodes have the same Sun Cluster software installed at that time, all new func-
tionality becomes available and any administrative restrictions are removed.
If a node that has not been upgraded is an active member of the cluster at the time you run the -c option to scversions, the
command has no effect because the cluster is already running at the highest possible level of functionality.
If a node has not been upgraded and is not an active member of the cluster when you run the -c option to scversions (for exam-
ple, if that node is down for maintenance), the internal protocols of the cluster are upgraded to the highest possible ver-
sions. You might have to upgrade the node that was not an active member of the cluster to enable it to rejoin the cluster.
EXIT STATUS
0 Success
non-zero Failure
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWsczu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
SEE ALSO scinstall(1M)Sun Cluster 3.2 17 Aug 2007 scversions(1M)