09-05-2014
Hi,
until now I don't have much information about the project, kickoff meeting will be this month.
This is the information I got in advance. Of course I will do everything to avoid using WPAR's, but that is what the customer was asking for.
I was just wondering if anybody has experience with a config like that.
Wish me luck that I won't need it
Regards, ff
9 More Discussions You Might Find Interesting
1. Infrastructure Monitoring
Hi,
I have a shared AIX wpar configured.
I have started snmpd process on shared AIX wpar.
But when i tried to query a MIB id using the following command
/opt/OV/bin/snmpget -d -v 1 -c public -p <hostname> .1.3.6.1.2.1.1.7.0
i get the following error message
#... (0 Replies)
Discussion started by: avazeer
0 Replies
2. AIX
Hello,
We have a system running AIX 6.1.7.1. We have created a Workload Partition(wpar) on this system with wpar specific routing enabled.
On wpar, we are running DNS (UDP/53) and syslog (UDP/514).
en0: 1.1.1.1/255.255.255.0 NOT assigned to any wpar
en1:... (0 Replies)
Discussion started by: 03sep2011
0 Replies
3. AIX
seems to be WPAR is quite easy to set up..without additional licenses..
If I don't need Linux and all my legacy and new apps are happy in AIX 7.1 (the latest OS), I could save all troubles and use WPAR.
Can someone comment on this ??
One copy of OS to maintain, so to speak..
... (4 Replies)
Discussion started by: ppchu99
4 Replies
4. Shell Programming and Scripting
Hi All,
This is for WPAR monitoring shell script, earlier opened thread was closed, had to open a new thread, as suggested I have used script as below, But am trying to get the output in below format, need suggestions with it. Below is the lswpar output, required output format.
... (7 Replies)
Discussion started by: aix_admin_007
7 Replies
5. UNIX for Advanced & Expert Users
Can anyone please let know difference between LPAR/DLPAR/WPAR.
and its purpose ??? (3 Replies)
Discussion started by: Pavithran
3 Replies
6. AIX
Hi.
I've setup a wpar on aix
mkwpar -h ibmunix2 -i -r -N interface=en0 address=10.6.0.1 netmask=255.255.255.0 -n ibmunix2
When i log into ibmunix2 it can't ping any external host,include the ibm host.
How to set route for network please?
I've set ibmunix2 with a different subnet.
... (7 Replies)
Discussion started by: Linusolaradm1
7 Replies
7. AIX
Anyone running CICS TX in a WPAR ?
In my attempts to run CICS TX 5.1.0.1 in a WPAR..... CICS fails to start due to unable to load a CICS IPC Kernel Extension. The Kernel Extension is 64 bit (so not a 32 vs 64 bit issue).
Base system/LPAR is Power8 and AIX 7.1 TL3 SP5. WPAR is versioned... (4 Replies)
Discussion started by: The Doctor
4 Replies
8. AIX
AIX 7.1
New to WPAR, hopefully just missing something simple here.
Creating the WPAR like this.....
(The box where the WPAR is hosted does have an iscsi protocol device)
mkwpar -h wpar08 -l -n wpar08 -N interface=en0 address=xxx.xx.xx.xxx netmask=255.255.255.0 -D devname=/dev/iscsi0 -D... (0 Replies)
Discussion started by: TomR
0 Replies
9. AIX
I have this error when I'm trying to do clogin from AIX 7200-00-00-0000 into a wpar with AIX 5.2
abanksPaDesa2:/> clogin AbanksBDPA_wpar
exec: A file or directory in the path name does not exist
somebody can help me to fix this? I'm restoring the wpar from wpar mksysb not a mksysb from... (2 Replies)
Discussion started by: sandra25350
2 Replies
fruadm(1M) System Administration Commands fruadm(1M)
NAME
fruadm - prints and updates customer data associated with FRUs
SYNOPSIS
/usr/platform/sun4u/sbin/fruadm
/usr/platform/sun4u/sbin/fruadm -l
/usr/platform/sun4u/sbin/fruadm [-r] path [text]
DESCRIPTION
fruadm prints or sets the customer data for Field-Replaceable Units (FRUs).
Without arguments, fruadm prints the paths of all FRU ID-capable FRUs (containers) in the system, along with the contents of the customer
data record, if present, for each such FRU; for FRUs without customer data, fruadm prints only the container's path.
Only a privileged user can create or update data in containers. The privileges required to perform these write operations are hardware
dependent. Typically, a default system configuration restricts write operations to the superuser or to the platform-administrator user.
OPTIONS
The following options are supported:
-l List the system's frutree paths.
-r Recursively display or update the data for all containers rooted at the argument path.
OPERANDS
The following operands are supported:
path A full or partial system frutree path for or under which to print or set the customer data. The first field of each
line of output of fruadm -l gives the valid full frutree paths for the system.
Paths can include shell meta-characters; such paths should be quoted appropriately for the user's shell. For par-
tial paths, the first matching full path is selected for display or update. Without the -r option, the path must be
that of a container; with the -r option, all containers (if any) under path will be selected.
text Up to 80 characters of text set as the customer data. If the text contains white space or shell metacharacters, it
should be quoted appropriately for the user's shell.
EXAMPLES
Example 1: Displaying All Customer Data
The following example prints all customer data available from FRUs on the system. For containers with no customer data, only the contain-
ers' paths will be listed.
example% fruadm
Example 2: Displaying Customer Data For a Single FRU
The following command prints the customer data, if present, for the specified FRU:
example% fruadm /frutree/chassis/system-board
Example 3: Displaying Customer Data For a Single FRU
The following command prints the customer data, if present, for the first mem-module found:
example% fruadm mem-module
Example 4: Setting Customer Data
The following example sets the customer data for a FRU:
example# fruadm system-board 'Asset Tag 123456'
Example 5: Setting Customer Data
The following command sets the customer data for all FRUs under chassis:
example# fruadm -r /frutree/chassis "Property of XYZ, Inc."
EXIT STATUS
The following exit values are returned:
0 Successful completion.
>0 An error occurred.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWfruip.u |
+-----------------------------+-----------------------------+
|Interface Stability |Unstable |
+-----------------------------+-----------------------------+
SEE ALSO
prtfru(1M), attributes(5)
SunOS 5.10 22 Feb 2002 fruadm(1M)