09-02-2014
sorry! the first set of numbers is supposed to be 192.168.222.4, more to add would be that 192.168.222.2 is the gateway and dns of 192.168.222.4
and yes there is a port range. i think thats only the case if it cant connect the the server on 10.10.10.250. but the program i need to use eats all traffic that isnt needed.
so in turn its 10.10.10.250 being the reporting box, 10.10.10.125 being the connection live to the web to hit said reporting box, and 192.168.222.2 being the gateway/dns server of 192.168.222.4.
192.168.222.4 > 192.168.222.2 > 10.10.10.125 > 10.10.10.250
i say this because the last time i had it working it showed 10.10.10.125 as the address for 192.168.222.4(i assume thats masquerading) on the reporting box, and in the inetsim config file it says what ip should be used if inetsim will act as a router for certain traffic
This is a malware traffic analysis box. so it needs to only have this one ip address allowed on this one port so that it can report findings of files run to said box.
the inetsim program also makes its own rules that are pretty annoying. at one point i had it telling me that it was established but wasnt showing activity on the destination server. and now its back to square one. let me know if you need more details. sorry for the typo!
and i have traffic from 10.10.10.250 already accepted, its from 192.168.222.2 that i cant get routed.
7 More Discussions You Might Find Interesting
1. UNIX Desktop Questions & Answers
Help,
I have been stuck on this issue for weeks.
I am a unix noobie.
I have a very long string and within that string I am trying to get proc file names
ie
PROCNAME1=SOME_FILENAME_UPDTBASE.SQL
There is a space on either side.
I can't for the life of me peel out the proc name:... (13 Replies)
Discussion started by: owenian
13 Replies
2. Shell Programming and Scripting
Although my sed skills are gradually developing, thanks in large part to this forum, I'm having a hard time dealing with pattern space and looping, which I suspect is what I'll need a better handle on to figure out my current issue, which is converting a multi line file like this:
... (4 Replies)
Discussion started by: tiggyboo
4 Replies
3. UNIX for Dummies Questions & Answers
Hi All,
i was reading up on a umask question on this forum and have a question on this.
the umask value on my home PC running on cygwin is 022. when i create a dir it defaults to permission 755, when i create a file it defaults to 644. Now it starts at 777 for dirs and 666 for files and... (1 Reply)
Discussion started by: Irishboy24
1 Replies
4. Shell Programming and Scripting
Hi,
First post here. I have something that may prove to be difficult.
I have the following files:
Example1.0.0.tar.gz
Example2.tar
Example3.zip
Example4.0.0.0.0.0.bzip2
I need to remove the file extensions and store as a variable so they look like this:
Example1.0.0
Example2... (3 Replies)
Discussion started by: Spadez
3 Replies
5. Shell Programming and Scripting
hello; Got a problem running monitoring scripts using sudo ssh.. Mgmt decided to take away root sudoers access.. so most of the scripts ran as:
sudo ssh $BOX ...
Now I need to run them as:
echo $my_pw | sudo -S -l my_user_id $BOX ...
I tried this but not working..
Any wisdom/tricks... (3 Replies)
Discussion started by: delphys
3 Replies
6. Red Hat
I want to start by saying I already resolved my issue but I want to understand why I am seeing what I am seeing.
I have a server with a RAID controller two 500GB drives and six 600GB drives. The two 500GB drives are mirrored and have the OS installed on them. The six 600GB they wanted set as... (4 Replies)
Discussion started by: scotbuff
4 Replies
7. OS X (Apple)
OSX 10.12.3, default bash terminal.
Consider this code and note it is calling 'sh' inside the code...
#!/bin/sh
echo '1\n2\n2\n3\n5' > /tmp/text
hexdump -C /tmp/text
/bin/echo '1\n2\n3\n4\n5' > /tmp/text
hexdump -C /tmp/text
Now view the interactive mode below, note the underlying shell is... (6 Replies)
Discussion started by: wisecracker
6 Replies
LEARN ABOUT OPENSOLARIS
prtdscp
prtdscp(1M) System Administration Commands prtdscp(1M)
NAME
prtdscp - display DSCP IP addresses
SYNOPSIS
prtdscp [-v ]
prtdscp [-v ] -h
prtdscp [-v ] -d
prtdscp [-v ] -s
DESCRIPTION
prtdscp displays the IP addresses associated with a Domain to Service Processor Communications Protocol (DSCP) link. If no arguments are
specified, prtdscp displays the IP addresses on both ends of the DSCP link. The IP address of either the Service Processor or domain side
can be displayed separately by the use of the -s or -d options, respectively.
OPTIONS
The following options are supported:
-v Verbose mode. Print additional details about the program's internal progress to stderr.
-h Help. Print a brief synopsis of the program's usage and exit. All other command line arguments are ignored.
-d Display only the local domain's IP address.
-s Display only the remote Service Processor's IP address.
EXAMPLES
Example 1 Displaying both addresses
The following example displays both the local domain's IP address and the remote SP's IP address:
# prtdscp
Domain Address: 192.168.103.2
SP Address: 192.168.103.1
Example 2 Displaying the local IP address
The following example displays the local domain's IP address:
# prtdscp -d
192.168.103.2
Example 3 Displaying the remote IP address
The following example display the remote SP's IP address:
# prtdscp -s
192.168.103.1
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWdscpr.u, SUNWdscpu.u |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
SEE ALSO
attributes(5)
SunOS 5.11 25 Apr 2006 prtdscp(1M)