08-13-2014
10 More Discussions You Might Find Interesting
1. Solaris
Hi
I received a Sun server and want to know whether the ILOM will allow me to install Solaris on the server.
I was able to access the ILOM (ssh and serial and web). But will it allow me to install Solaris on it?
thx (11 Replies)
Discussion started by: melanie_pfefer
11 Replies
2. Solaris
HI,
Is it possible to set up ILOM from the ethernet terminal. I 'm at remote location from server so would like to know if i can configure it remotely
I'm able to access my server via ssh terminal. (3 Replies)
Discussion started by: fugitive
3 Replies
3. Solaris
I 've 2 different T5220 and both are showing different prompts when i ssh to the console.
1. Shows sc> ALOM
2. Shows -> ILOM
as far as i know the T5220 comes with ILOM , so why i 'm seeing 2 different type of console for same tyep of hardware ?
and i found that we... (6 Replies)
Discussion started by: fugitive
6 Replies
4. Solaris
I bought a new Netra X4450 and this is my first time experience with intel based Sun server. I powered on the machine and went through the Sun wizard to complete OS configuration. Now I am on the root prompt and trying to get to the ILOM. On Sparc based servers I used to be able to go to the ILOM... (4 Replies)
Discussion started by: StarSol
4 Replies
5. Solaris
hi guys
How to know ILOM and ALOM ip address.
how to find the ilom alerts and alom alerts can one help out pls
thanks,
deepu.
---------- Post updated at 04:39 AM ---------- Previous update was at 04:38 AM ---------- (2 Replies)
Discussion started by: pradeepaasuri
2 Replies
6. Solaris
Hi,
I am just confused with iLOM. Is iLOM is applicable for SPARC as well as X86 servers?? which are having CMM. Hope ALOM will be applicable for rest of the servers like v240 kind of series.
Can any one pls clarify this??
Thanks in Advance
Vaisakh K S (3 Replies)
Discussion started by: vks47
3 Replies
7. Solaris
Hi,
Can you pls. provide me detailed procedure on how to update system BIOS and ILOM Firmware for x4100 M2 servers.
Thanks. :) (1 Reply)
Discussion started by: chozie
1 Replies
8. Hardware
Hello,
I have an x86 server with an ILOM connection that produces strange characters when I perform a start /SP/console, see below:
Oracle(R) Integrated Lights Out Manager
Version 3.0.16.10.a r68533
Copyright (c) 2011, Oracle and/or its affiliates. All rights reserved.
-> start... (9 Replies)
Discussion started by: kerrygold
9 Replies
9. Solaris
While trying to perform a firmware upgrade on this ilom, the system refused to allow uploading of more than ~900k or so... We tried multiple approaches using FTP and all failed. I decided to start this morning by firing up Apache on another box and trying the same process via HTTP but when I went... (8 Replies)
Discussion started by: DustinT
8 Replies
10. Solaris
Dear all
would you tell me the command in ILOM to :
- Check for error logged in ILOM ouput
- Check for system uptime (DAYS)
- Check for system reboot logged (Last system reboot)
Thank you (1 Reply)
Discussion started by: gema.utama
1 Replies
pxfw(8) pxfw 0.5 pxfw(8)
NAME
pxfw - Firmware flashing tool for Plextor CD/DVD devices
SYNOPSIS
pxfw -l
pxfw -d DEVICE [-if firmware.bin] [-u] [-f] [-v]
pxfw -d DEVICE [-e] [-r] [-t] [-v]
DESCRIPTION
pxfw is the linux firmware flasher for Plextor CD and DVD drives. Remove any disks before flashing.
FEATURES
You can flash the firmware of these drives:
Plextor Premium, Premium-2, PX-712, PX-716, PX-755 and PX-760.
DEVICE
can be an IDE, SCSI, SATA, USB or FireWire connected optical drive. Not all SATA controller support all Plextor features.
Linux:
/dev/hdX: IDE device
/dev/scdX: Linux 2.4: SATA, SCSI, USB device, or IDE device via ide-scsi emulation
/dev/srX: Linux 2.6: IDE device via new ATA layer, SCSI or USB device
OpenBSD/NetBSD:
/dev/rcdX
FreeBSD:
/dev/cd: SCSI device
/dev/acd: ATA device
MacOS X:
/dev/disk:
win32:
C:,D:,E:, ... X:,Y:,Z:
OPTIONS
-l scan busses for all available CD and DVD devices
-if select inputfile. Specify the firmware binary file, which should
be written to DEVICE.
-u proceed update. When the firmware checksum test has succeeded,
write firmware to DEVICE.
-f force flashing. Even if DEVICE is not recognized, or firmware.
checksum has failed, firmware writing will be forced.
Handle with care.
-e read EEPROM from DEVICE.
-r reboot the device.
-t test which opcodes are supported by the device.
-v debug.
EXAMPLES
pxfw -d /dev/hdc -if 755_1.07.bin -u
writes firmware file 755_1.07.bin into Master Drive on Secondary IDE-Port.
pxfw -d /dev/sr3 -e -oe file.foo
reades EEPROM from device /dev/sr3 and writes it to file.foo.
please report man page improvements to T.Maguin@web.de
Gennady ShultZ Kozlov 02 April, 2009 pxfw(8)