Can you show us the output from the following (assuming we're looking at ent0):-
Please paste the output in [CODE] & [/CODE] tags to make the output clear like this:-
Quote:
[CODE]Here is my output[/CODE]
... generates this:-
The characters are fixed width and multiple spaces are respected.
The last one will give lots of useful statistics to see how it is currently performing.
i purchased, what was labeled as a 4-port fast ethernet sbus card from ebay.
i installed it in my ultra1, and it seems to be working fine. how can i determine if the card is infact a fast ethernet card vs. the standard ethernet 4-port card? (7 Replies)
I am trying to find a command to return the "link" speed of the networks installed on AIX.
ifconfig - gives me where the link is up and the duplex setting. I need to determine for example if the ethernet connection is 10, 100, 1000 Mbs or what the current speed is based on the network media... (3 Replies)
hai this is nagesh
when i was doing practical , i find some dought.
iam using solaris 9. how can i see the ethernet card speed , wheather it is halfduplex or full duplex.any body please help me (4 Replies)
hi ,
i have to tranfer some 12 - 13 gb of files from one server to anothier presently i m using the SFTP but it is taking to much time to trafer the files is there any way to use increase the efficiency of SFTP.
i cant use the FTP (4 Replies)
Hi guys,
Suppose you have a server with two ethernet cards (1GB each) and each cards are connecting to two different switches cisco 3750. My question is:
How can I setup my server's network interfaces to increase the throughput up to 2GB? is it possible? If not, do you know another way to up... (3 Replies)
Hi,
Does anyone know how can I determine the maximum capable speed on a network interface card for different OS like HP, Sun, AIX and Linux.
I am aware of the tool "ethtool" which can be used for Linux. Are there any handly commands or /proc files where I can get this info depending on the OS.... (3 Replies)
Hi,
Will removing space from the server increases the speed/performance.
how are they related?
please explain the relationship. thanks in advance
regards,
Pradeep (2 Replies)
Hi All,
Please let me know the step by step process to set the e1000g0 interface speed to 1000mbps with full duplex from 100fdx and how to disable the auto negotiation with switch?.
Thanks and Regards,
Ganesh. (7 Replies)
Discussion started by: gsrungav
7 Replies
LEARN ABOUT MINIX
s_n_d
SET_NET_DEFAULT(8) System Manager's Manual SET_NET_DEFAULT(8)NAME
s_n_d, set_net_default - select the default TCP/IP network
SYNOPSIS
set_net_default: not found
DESCRIPTION
This manual page is here because so many others refer to it. The set_net_default command does not exist under standard Minix, because the
TCP/IP server only supports one network. The server under Minix-vmd supports four different networks, that can each be chosen as the
default network.
The TCP/IP library and commands do have a notion about a "default network" however, because the code is shared between the Minix versions.
So if you want to venture into network programming then you should know about the devices and environment variables mentioned below to make
your program compatible. (Especially since there is a plan to upgrade the TCP/IP server for standard Minix.)
Options and environment to change the default
Many TCP/IP programs implement the following options and environment variables to change the default devices set by set_net_default. The
options are only implemented for low level programs where it makes sense to name a network device. The environment variables are used in
all code. You can run a process and all its children connected to a different network by setting four environment variables.
ETH_DEVICE=device
-E device
Device to use as raw ethernet device instead of the default /dev/eth.
PSIP_DEVICE=device
-P device
Pseudo IP device to use instead of /dev/psip.
IP_DEVICE=device
-I device
IP device to use instead of /dev/ip.
TCP_DEVICE=device
-T device
TCP device to use.
UDP_DEVICE=device
-U device
UDP device to use.
FILES
/dev/eth[01] First and second raw ethernet.
/dev/psip[01] First and second Pseudo IP network.
/dev/ip[0123] IP devices for two ethernets and two Pseudo IP networks.
/dev/tcp[0123] TCP devices for same four networks.
/dev/udp[0123] UDP devices.
/dev/eth, /dev/psip, /dev/ip, /dev/tcp, /dev/udp
Devices for the default network, links to the devices above. Eth is only present if ethernet is the default, psip only
for pseudo IP.
SEE ALSO ip(4), boot(8).
AUTHOR
Kees J. Bot (kjb@cs.vu.nl)
SET_NET_DEFAULT(8)