And i'am getting the following alerts in the server
Code:
333BD283 0811044814 U S LVDD Bad block detected with no relocation al
333BD283 0811041114 U S LVDD Bad block detected with no relocation al
333BD283 0811040614 U S LVDD Bad block detected with no relocation al
03913B94 0810230414 U H LVDD HARDWARE DISK BLOCK RELOCATION ACHIEVED
E86653C3 0810230414 P H LVDD I/O ERROR DETECTED BY LVM
49A83216 0810230414 T H hdisk1 DISK OPERATION ERROR
03913B94 0810200614 U H LVDD HARDWARE DISK BLOCK RELOCATION ACHIEVED
E86653C3 0810200614 P H LVDD I/O ERROR DETECTED BY LVM
49A83216 0810200614 T H hdisk1 DISK OPERATION ERROR
Also when i'am doing syncvg -v rootvg i'am getting the below error,
Code:
0516-1296 lresynclv: Unable to completely resynchronize volume.
The logical volume has bad-block relocation policy turned off.
This may have caused the command to fail.
0516-934 /usr/sbin/syncvg: Unable to synchronize logical volume hd6.
kindly suggest what i have to do to bring the hd6 to syncronized state.
Code:
sysdumpdev -l
primary /dev/sysdmp_a
secondary /dev/sysdmp_b
copy directory /var/adm/ras
forced copy flag TRUE
always allow dump FALSE
dump compression ON
The rootvg is in mirrored state.
Last edited by Don Cragun; 08-11-2014 at 01:27 AM..
Reason: Add CODE and ICODE tags.
hi, i was trying to mirror root volume group and the command i was using didnt respond for a long time
mirrorvg -m rootvg hdisk1
I was checking rootvg and it gives below. how do i fix stale partitions?? it seems to be on hdisk1
LV NAME TYPE LPs PPs PVs LV STATE ... (2 Replies)
hi All
I have one RP 3410 server with hp-ux 11.23 mirror disk
it's lvdislay -v /dev/vg00/lvol4 shows stale in some location
Actual is current
pls help me to resolve the probem
I have check with lvsync command and vgsync
but not working
re
Rajesh (1 Reply)
There are a filesystem /GWD/appbase/projects/GRIDDB
Under this filesystem there is a directory called backup.
But When I am trying to access the backup directory ,it is showing me the following error:
# cd /GWD/appbase/projects/GRIDDB
# cd backup
-bash: cd: backup: Stale NFS file handle
... (3 Replies)
my AIX server used to have scsi disk hdisk4. Now i removed that disk. But still it is still listed in lspv. So how can i remove the stale entry of it ? (6 Replies)
HP-UX B.11.23 U ia64
I've got two users that show in "w" with long idle times but if I search for their processes I find nothing (ps -ef | grep username )
I'm not sure why "w" still sees them and if there is anything (short of a reboot) that I can do to clean them out.
Ideas? (8 Replies)
Any package that I try to install, is giving an error of 'lock':
# pkgadd -d openssl-1.0.0g-sol10-sparc-local
The following packages are available:
1 SMCossl openssl
(sparc) 1.0.0g
Select package(s) you wish to process (or 'all' to process
all packages).... (2 Replies)
Hello,
I have an ancient HP-UX 11.11 system where I have a logical volume marked stale and I can't get it sync'd. I have tried lvsync and lvreduce/lvextend to no avail. It is just one 4Mb PE on the disk that I can't get current.
# lvdisplay -v /dev/vg00/lvol5 | grep stale
LV Status ... (17 Replies)
Hi everybody,
I have a little problem with my AIX 6.1, PowerHA 6.1 LVM mirror. After problem with SAN pathing of our one Datacenter, I have LV at stale state.
# lsvg cpsdata2vg
VOLUME GROUP: cpsdata2vg VG IDENTIFIER: 00fb518c00004c0000000169445f4c2c
VG STATE: ... (6 Replies)
Discussion started by: Necronomic
6 Replies
LEARN ABOUT CENTOS
locale::codes::langext
Locale::Codes::LangExt(3) User Contributed Perl Documentation Locale::Codes::LangExt(3)NAME
Locale::Codes::LangExt - standard codes for language extension identification
SYNOPSIS
use Locale::Codes::LangExt;
$lext = code2langext('acm'); # $lext gets 'Mesopotamian Arabic'
$code = langext2code('Mesopotamian Arabic'); # $code gets 'acm'
@codes = all_langext_codes();
@names = all_langext_names();
DESCRIPTION
The "Locale::Codes::LangExt" module provides access to standard codes used for identifying language extensions, such as those as defined in
the IANA language registry.
Most of the routines take an optional additional argument which specifies the code set to use. If not specified, the default IANA language
registry codes will be used.
SUPPORTED CODE SETS
There are several different code sets you can use for identifying language extensions. A code set may be specified using either a name, or
a constant that is automatically exported by this module.
For example, the two are equivalent:
$lext = code2langext('acm','alpha');
$lext = code2langext('acm',LOCALE_LANGEXT_ALPHA);
The codesets currently supported are:
alpha
This is the set of three-letter (lowercase) codes from the IANA language registry, such as 'acm' for Mesopotamian Arabic.
This is the default code set.
ROUTINES
code2langext ( CODE [,CODESET] )
langext2code ( NAME [,CODESET] )
langext_code2code ( CODE ,CODESET ,CODESET2 )
all_langext_codes ( [CODESET] )
all_langext_names ( [CODESET] )
Locale::Codes::LangExt::rename_langext ( CODE ,NEW_NAME [,CODESET] )
Locale::Codes::LangExt::add_langext ( CODE ,NAME [,CODESET] )
Locale::Codes::LangExt::delete_langext ( CODE [,CODESET] )
Locale::Codes::LangExt::add_langext_alias ( NAME ,NEW_NAME )
Locale::Codes::LangExt::delete_langext_alias ( NAME )
Locale::Codes::LangExt::rename_langext_code ( CODE ,NEW_CODE [,CODESET] )
Locale::Codes::LangExt::add_langext_code_alias ( CODE ,NEW_CODE [,CODESET] )
Locale::Codes::LangExt::delete_langext_code_alias ( CODE [,CODESET] )
These routines are all documented in the Locale::Codes::API man page.
SEE ALSO
Locale::Codes
The Locale-Codes distribution.
Locale::Codes::API
The list of functions supported by this module.
http://www.iana.org/assignments/language-subtag-registry
The IANA language subtag registry.
AUTHOR
See Locale::Codes for full author history.
Currently maintained by Sullivan Beck (sbeck@cpan.org).
COPYRIGHT
Copyright (c) 2011-2013 Sullivan Beck
This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
perl v5.16.3 2013-02-27 Locale::Codes::LangExt(3)