hi, i was trying to mirror root volume group and the command i was using didnt respond for a long time
mirrorvg -m rootvg hdisk1
I was checking rootvg and it gives below. how do i fix stale partitions?? it seems to be on hdisk1
LV NAME TYPE LPs PPs PVs LV STATE ... (2 Replies)
hi All
I have one RP 3410 server with hp-ux 11.23 mirror disk
it's lvdislay -v /dev/vg00/lvol4 shows stale in some location
Actual is current
pls help me to resolve the probem
I have check with lvsync command and vgsync
but not working
re
Rajesh (1 Reply)
There are a filesystem /GWD/appbase/projects/GRIDDB
Under this filesystem there is a directory called backup.
But When I am trying to access the backup directory ,it is showing me the following error:
# cd /GWD/appbase/projects/GRIDDB
# cd backup
-bash: cd: backup: Stale NFS file handle
... (3 Replies)
my AIX server used to have scsi disk hdisk4. Now i removed that disk. But still it is still listed in lspv. So how can i remove the stale entry of it ? (6 Replies)
HP-UX B.11.23 U ia64
I've got two users that show in "w" with long idle times but if I search for their processes I find nothing (ps -ef | grep username )
I'm not sure why "w" still sees them and if there is anything (short of a reboot) that I can do to clean them out.
Ideas? (8 Replies)
Any package that I try to install, is giving an error of 'lock':
# pkgadd -d openssl-1.0.0g-sol10-sparc-local
The following packages are available:
1 SMCossl openssl
(sparc) 1.0.0g
Select package(s) you wish to process (or 'all' to process
all packages).... (2 Replies)
Hello,
I have an ancient HP-UX 11.11 system where I have a logical volume marked stale and I can't get it sync'd. I have tried lvsync and lvreduce/lvextend to no avail. It is just one 4Mb PE on the disk that I can't get current.
# lvdisplay -v /dev/vg00/lvol5 | grep stale
LV Status ... (17 Replies)
Hi everybody,
I have a little problem with my AIX 6.1, PowerHA 6.1 LVM mirror. After problem with SAN pathing of our one Datacenter, I have LV at stale state.
# lsvg cpsdata2vg
VOLUME GROUP: cpsdata2vg VG IDENTIFIER: 00fb518c00004c0000000169445f4c2c
VG STATE: ... (6 Replies)
Discussion started by: Necronomic
6 Replies
LEARN ABOUT HPUX
vxreattach
vxreattach(1M)vxreattach(1M)NAME
vxreattach - reattach disk drives that have once again become accessible
SYNOPSIS
/etc/vx/bin/vxreattach [-br ] [accessname...]
/etc/vx/bin/vxreattach -c accessname
DESCRIPTION
The vxreattach utility reattaches disks to the disk group they were in and retains the same media name.
This operation may be necessary if a disk has a transient failure, or if Veritas Volume Manager (VxVM) starts with some disk drivers
unloaded and unloadable. Disks then enter the failed state. If the problem is fixed, vxreattach may be able to reattach the disks without
plexes being flagged as stale, as long as the reattach happens before any volumes on the disk are started.
vxreattach tries to find a disk in the same disk group with the same disk ID for the disk(s) to be reattached. The reattach operation may
fail even after finding the disk with the matching disk ID if the original cause (or some other cause) for the disk failure still exists.
vxreattach is usually invoked by vxdiskadm when performing disk recovery. It is not intended to be run directly by an administrator.
OPTIONS -b Performs the reattach operation in the background.
-c Checks if a reattach is possible. No operation is performed, but the name of the disk group and disk media name at which the
disk can be reattached is displayed.
-r Tries to recover stale plexes of any volumes on the failed disk. It does this by calling vxrecover.
EXIT CODES
A zero exit status is returned if the reattach is performed; non-zero is returned otherwise.
See vxintro(1M) for a list of standard exit codes.
EXAMPLES
Check if reattachment of disk c1t2d0 is possible:
/etc/vx/bin/vxreattach -c c1t2d0
If reattachment is possible, vxreattach returns with an exit status of 0 and displays the disk group name and disk media name. If reat-
tachment is not possible, vxreattach returns an exit status of 2 and displays an error.
Attempt to reattach the disk in the foreground and try to recover stale plexes of any volumes on the disk:
/etc/vx/bin/vxreattach -r c1t2d0
If the reattachment is successful, vxreattach returns an exit status of 0. Otherwise, if an error occurs, vxreattach returns a non-zero
exit code as defined on vxintro(1M).
FILES
/etc/default/vxplex Standard defaults file that can be used to determine whether FastResync is used when attaching plexes. See vxplex(1M)
for details.
SEE ALSO vxdiskadm(1M), vxintro(1M), vxplex(1M), vxrecover(1M)VxVM 5.0.31.1 24 Mar 2008 vxreattach(1M)