08-07-2014
As DGPickett has already said, check your wireless channel(s). You may have interference (on the same channel) from another local AP/Router.
It's quite possible that laptops being typically higher powered devices will work but lesser powered (phones) will not.
Download and install a copy of Inssider on one of the working laptops and see what competing networks there are. Perhaps you can set your wireless channel to avoid those.
10 More Discussions You Might Find Interesting
1. Cybersecurity
At the moment, I have three computers at home. I want to use boardband for my three computers. But I don't want to use network at home. I have been looking for a product which call OriNoCo USB Cilent. How do I connect to the internet with my computer??
If I post this in a wrong place, please... (0 Replies)
Discussion started by: him
0 Replies
2. IP Networking
Hi,
I have a laptop with a Linksys Wireless G PCMCIA card and a cable connection goin into a router and then a patch lead from the router going to a Linksys Wireless G access point IP 192.168.1.245 with DHCP disabled.
I can connect to the access point from the laptop, but how do I get the... (1 Reply)
Discussion started by: perleo
1 Replies
3. UNIX for Dummies Questions & Answers
I installed solaris 10 x86 on my dell laptop on a partition alongside windows xp. I am able to connect to the internet in xp with both my ethernet local area connection as well as through my wireless network card. But, however i do not have clue as to how to go about it in solaris.
i did not... (0 Replies)
Discussion started by: stakes20
0 Replies
4. Linux
I am running FC4:
Linux maincomp 2.6.13-1.1532_FC4smp
I recently changed the OS from windows XP, and have a feeling that for some reason my wireless network card is slower on Fedora Core 4. The Belkin PCI 802.11b card was automatically detected and configured by FC4 when I installed the OS,... (0 Replies)
Discussion started by: dangral
0 Replies
5. Cybersecurity
Hi all,
How can I monitor packet traffic on my wireless router?
Some info
- my wireless router is netgear wgr614
- everyone can connect it i.e. no password required
- I would like to see where they connect, how they are using the internet connection
I installed wireshark and captured... (3 Replies)
Discussion started by: SaTYR
3 Replies
6. Hardware
hi
Howto identify wireless network card using Live CD? (2 Replies)
Discussion started by: ccc
2 Replies
7. Ubuntu
Hi,
I am a new to Ubuntu linux and trying to learn it. I am using ubuntu 10.04. I am getting problem in setting my wireless network. I set it up properly and was working fine. But suddenly it stopped working, though the wireless icon saying that it is connected, but can't load any page. I... (2 Replies)
Discussion started by: linux_learner
2 Replies
8. Red Hat
Hi,
I am trying to set up a wireless internet connection on my centos OS (6). I can connect via the copper using the internal LAN but cannot get the wireless connection working.
The 2 files that I have configured are:
My wpa_supplicant.conf:
ctrl_interface=/var/run/wpa_supplicant... (1 Reply)
Discussion started by: Duffs22
1 Replies
9. Hardware
Good Day All,
There are numerous results when searching google on this issue, however, none seem to have a solution.
I have read until my eyes bleed and banged my head on the table more than once! :)
I am hoping to resolve this issue -- or at least have a decent workaround.
It is a real... (13 Replies)
Discussion started by: RogerBaran
13 Replies
10. Ubuntu
I run lubuntu from usb (try lubuntu, it's not install on my pc )
And i try to connect to network
I see the network name
And i put the pass
But it's not connect..
I tried to open hot spot on my phone and try to connect and it's not connect
I have edumax n150
Try to install new driver -... (0 Replies)
Discussion started by: popcoern
0 Replies
LEARN ABOUT MOJAVE
tcl_getstdchannel
Tcl_GetStdChannel(3) Tcl Library Procedures Tcl_GetStdChannel(3)
__________________________________________________________________________________________________________________________________________________
NAME
Tcl_GetStdChannel, Tcl_SetStdChannel - procedures for retrieving and replacing the standard channels
SYNOPSIS
#include <tcl.h>
Tcl_Channel
Tcl_GetStdChannel(type)
Tcl_SetStdChannel(channel, type)
ARGUMENTS
int type (in) The identifier for the standard channel to retrieve or modify. Must be one of TCL_STDIN, TCL_STDOUT, or
TCL_STDERR.
Tcl_Channel channel (in) The channel to use as the new value for the specified standard channel.
_________________________________________________________________
DESCRIPTION
Tcl defines three special channels that are used by various I/O related commands if no other channels are specified. The standard input
channel has a channel name of stdin and is used by read and gets. The standard output channel is named stdout and is used by puts. The
standard error channel is named stderr and is used for reporting errors. In addition, the standard channels are inherited by any child
processes created using exec or open in the absence of any other redirections.
The standard channels are actually aliases for other normal channels. The current channel associated with a standard channel can be
retrieved by calling Tcl_GetStdChannel with one of TCL_STDIN, TCL_STDOUT, or TCL_STDERR as the type. The return value will be a valid
channel, or NULL.
A new channel can be set for the standard channel specified by type by calling Tcl_SetStdChannel with a new channel or NULL in the channel
argument. If the specified channel is closed by a later call to Tcl_Close, then the corresponding standard channel will automatically be
set to NULL.
If a non-NULL value for channel is passed to Tcl_SetStdChannel, then that same value should be passed to Tcl_RegisterChannel, like so:
Tcl_RegisterChannel(NULL, channel);
This is a workaround for a misfeature in Tcl_SetStdChannel that it fails to do some reference counting housekeeping. This misfeature can-
not be corrected without contradicting the assumptions of some existing code that calls Tcl_SetStdChannel.
If Tcl_GetStdChannel is called before Tcl_SetStdChannel, Tcl will construct a new channel to wrap the appropriate platform-specific stan-
dard file handle. If Tcl_SetStdChannel is called before Tcl_GetStdChannel, then the default channel will not be created.
If one of the standard channels is set to NULL, either by calling Tcl_SetStdChannel with a NULL channel argument, or by calling Tcl_Close
on the channel, then the next call to Tcl_CreateChannel will automatically set the standard channel with the newly created channel. If
more than one standard channel is NULL, then the standard channels will be assigned starting with standard input, followed by standard out-
put, with standard error being last.
See Tcl_StandardChannels for a general treatise about standard channels and the behaviour of the Tcl library with regard to them.
SEE ALSO
Tcl_Close(3), Tcl_CreateChannel(3), Tcl_Main(3), tclsh(1)
KEYWORDS
standard channel, standard input, standard output, standard error
Tcl 7.5 Tcl_GetStdChannel(3)