Dear All,
I need some help on weired thing happed today.
We have one process which unzip and copy the file on one location
The zip file will be
Code:
abc123_xyz456_pl_20140805.zip
The content inside the zip file would be
Code:
abc123_xyz456_pl_20140805.csv
The file will be copied to location
Code:
/file_loc/abc123/xyz456
The owner of the process, and directory xyz456 is same user1.
security Group is usrsgpr1.
The process was running good but today i see the transfer of
Code:
abc123_xyz456_pl_20140805.csv
to location
Code:
/file_loc/abc123/xyz456
but the file was not having any permission.
as below
Code:
---------- 1 user1 usrsgpr1 38475 aug 6 11:27 abc123_xyz456_pl_20140805.csv
Could you please help to understand what could be the reason? What could be wrong?
Other files are transferred with correct persmission but for one of the file this happened.
About process:
The process copy the zip file deposited by user on remote server (one of the shared unix drive), check the zip, copy the zip on tmp location if zip having no issue, then unzip the file anc copy the content on correct location.
Hello,
i need some help/advice on how to solve a particular problem.
these are the users:
|name | group |
---------- ---------------
|boss | department1 |
|assistant | department1 |
|employee | department1 |
|spy | department2 |
this is the... (0 Replies)
hi frnds
can u explain
/etc/shadow file have read and write permissions for root only
but while normal user changes his passwd it also updated in that file whats the logic behind that. (2 Replies)
Hi All,
https://www.unix.com/unix-advanced-expert-users/105758-chmod-parent-sub-directories.html
I have to change permission for the directories and subdirectories in single command
when googled i found some updates but i understand what is switch.
If there is a command please... (2 Replies)
Hi,
I am writing some shell script to check the file owner permission whether the write bit is turn on. If it is turn on it will copy the file to the destination else it will just prompt user to change the file and skipping it.
However, I am starting getting loss here as I have couple of... (2 Replies)
Hi,
I am facing issue while using scp. Source & target machines are Linux & HP-UX respectively.
On target machine, if I fire the following command, I get error:
Now if I try scp on another file, which is on the same source machine, it works fine.
All directories and subdirectories... (2 Replies)
Hi experts
cp bin root src /mnt
but not copy bin/bigfile
any help?
( I post this thread in the "redhat" forum wrongly, I don't know how to withdraw that question in that wrong forum)
Thanks (6 Replies)
Hello All
I have a file with rw-rw-r permission
I need to mv the file into different directory (dir has rwx-rwx-rwx permission)
with an others permission
The application which is moving the file falls in other group
I am getting the error
mv cannot renamed permission denied
... (12 Replies)
Hi,
Could you please tell me the OS command to grant as similar to below permission?
rwxrwxr-x
OS -- HP-UX
Regards,
Maddy (8 Replies)
Discussion started by: Maddy123
8 Replies
LEARN ABOUT LINUX
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)
08-06-2014
Copy of file without permission
