Do you get any output from the command:-
If you do, what you might well have is hdisks being collected together to form a vpath device. It is this device that you assign to your volume groups.
Hi All,
I have mirrored SAN volume on my B80 rootvg. Can I just remove the mirror and "Remove a P V from a V G" and it will be a diskless AIX?
Is that going to boot on SAN rootvg volume?
Thanks in advance,
itik (3 Replies)
Hello everyone
I got several aix boxes with aix 5.3
I got a ibm san ds4500
My question is
How can I do a match between my disks on aix and the san?
I try to do a match with the LUN but for example. In my san I got several 1 LUN and on one of my aix box I got this
If I type lscfg... (4 Replies)
We are considering a DR strategy of booting AIX 5.3 and 5.3 logical partitions from EMC Symmetrix SAN disks, so that we can replicate via SRDF to a recovery site. Has anyone tried configuring AIX 5.x systems to boot from SAN disk? If so, can you provide any information on the pros and cons of... (6 Replies)
hi all,
have a solaris 9 OS and a SAN disk which used to work fine is not getting picked up by my machine. can anyone point out things to check in order to troubleshoot this ??
thanks in advance. (3 Replies)
Scenario:
I've got 2 M5000's connected to a 9985 SAN storage array. I have configured the SAN disks with stmsboot, format and newfs. I can access the same SAN space from both systems. I have created files from both systems on the SAN space.
Question:
Why can't I see the file created... (3 Replies)
Hi all,
My main function is as a DBA. Another person manages the server and the SAN.
I just want to know if I should be worried about high disk I/O or is it irrelevant as the I/O "load balancing" will be "taken care" of by the SAN?
For example, I have hdisk1-5 and I can see that there are... (2 Replies)
Hi,
I have a production solaris 10 SPARC system (portal). Yesterday legato/Networker gave an I/O Error on one of the files on its SAN mounted disk.
I went to that particular file on the system, did an ls and it showed the file. However, ls -l did not work and it said IO error.
... (6 Replies)
Hello Folks,
I have directly connected my IBM Pseries AIX machine to SAN Storage
I have a dual port Fibre Channel Adapter
Connected both fiber ports to SAN Box IBM DS4500 Controller A & Controller B
Using IBM DS storage manager client 10 -- created one logical disk and assigned to a... (18 Replies)
Hello All,
Our servers having emc clarion for the data disks. Is that possible to see those san disks raid level from AIX ?
Am having AIX 6.1 and EMC clarion 5.5.
Regards,
Gowtham.G (3 Replies)
I am in the market looking to purchase a new E950 server and I am trying to decide between using local SSD drives or SSD based SAN. The application that will be running on this server is read-intensive so I am looking for the most optimal configuration to support this application. There are no... (2 Replies)
Discussion started by: ikx
2 Replies
LEARN ABOUT HPUX
vgrestore
vgrestore(1M)vgrestore(1M)NAME
vgrestore - restore a VxVM disk group back to an LVM volume group
SYNOPSIS
/etc/vx/bin/vgrestore vg_name
DESCRIPTION
The vgrestore command restores a Logical Volume Manager (LVM) volume group that was previously converted to a VxVM disk group by the vxvm-
convert utility.
ARGUMENTS
vg_name
Specifies the name of a volume group that was converted to a VxVM disk group by the vxvmconvert utility.
EXIT CODES
vgrestore exits with one of the following values:
0 Successful completion.
>0 Failure; an error occurred.
WARNINGS
vgrestore functions only on VxVM disk groups that were converted from LVM volume groups by the vxvmconvert command.
It is a good idea to back up user data before running vgrestore, and restore it after the vgrestore completes, as vgrestore can only
restore a logical volume back to the state it was in before conversion to VxVM. If data changed on the volume while it was a VxVM volume,
the changes won't be reflected on the volume after being restored to LVM.
As part of the original conversion process, applications that once referenced the now-converted LVM volume's path names may have changed to
reference VxVM volume special device file names. Alternatively, special device file path names originally representing the now-converted
LVM volumes may have changed to symbolic links pointing to the VxVM volume path names. Be sure to undo these actions when restoring back
to LVM.
Do not use vgrestore unless you are certain that you want to restore LVM volume groups. After vgrestore this is run, the VxVM disks will
no longer exist.
EXAMPLES
To restore the LVM volume group vg03 that was converted by vxvmconvert to the VxVM disk group dg03, enter:
vgcfgrestore vg03
SEE ALSO vxvmconvert(1M)
Veritas Volume Manager Migration Guide
VxVM 5.0.31.1 24 Mar 2008 vgrestore(1M)