Hello all,
I'm trying to recover from backup file to a new system with a new disk. I'm able to partition my new hard drive the same way as my old drive, but I'm unable to boot off of it. I have set the fdisk to toogle as a boot flag. But it does not seem to be working. Does anyone know how to... (4 Replies)
The second disk that I'm trying to make bootable is to hold another version of Solaris (9).
I've created the partitions with format and labeled the disk - created the filesystems with newfs - created and mounted the directories.
...but I think I've missed something out like using fdisk to... (16 Replies)
In our HP/Unix system, our master scsi drive was bootable and our mirrored drive was non-bootable. Are any of these alternatives possible:
1) Make the non-bootable scsi drive bootable? How?
2) Create a bootable scsi drive, then copy the mirrored data to the newly created scsi drive?
I seek... (1 Reply)
Hi,
I have an iSCSI LUN of 200GB. I increased it to 250GB and when I try to increase the size of the vg, I'm getting an error that none of the volumes have increased in size.
How can I get the OS to see the additional 50GB?
---------- Post updated at 03:22 PM ---------- Previous update... (9 Replies)
Hi,
I need to set up iscsi LUN on Solaris 9. I've done it on Solaris 10 with iscsiadm. How do you do it on Solaris 9 though? Currently using Solaris 9 update 2. Your help is appreciated.
Thanks,
Sparcman (6 Replies)
We "lose" the iscsi device after a reboot - i.e., it appears in /dev/rdsk and /dev/dsk but format cannot find it. Obviously, it won't mount either. This happens for two separately defined luns.
We must be missing a step in iscsiadm.
The luns are defined as targets, we can see them in... (2 Replies)
Hi,
I have an iSCSI LUN attached to an AIX 5.3 box. It's initial size is 250GB, I just grew it on the SAN to 300GB, but AIX is not seeing the change. Right now I have some processes going and it's eating up the disk space. I need to grow this lun by atleast 30GB otherwise the process with bomb... (5 Replies)
Hello Everyone,
Can someone help me to mount a SAN hdisk which contains a clone data copy(san) of the remote server to the another machine. Both servers are running in AIX.
Thanks in advance !
Regards,
Gowtham.G (3 Replies)
Hi,
I have aix 6.1 box. I want to configure iscsi luns from netapp storage. I tried in google but not getting proper solution for that. i m not getting the proper iqn name.
Please share me the steps to complete this requirements.
Thanks in advance. (1 Reply)
Hi,
I am trying to setup multipathing (using DM multipath) for a redhat cluster setup ...all setup is done but issue is :
node 1 shows the shared iscsi lun as sdc
node 2 shows the same as sdg (changes on reboots)
Due to this (i guess) i get i/o error & i can not read files created by... (0 Replies)
Discussion started by: heman96
0 Replies
LEARN ABOUT MOJAVE
installboot
installboot(1M)installboot(1M)NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)