after a long period of running, the network application's CPU load in our syst em increase slowly, the failed at the end. we use "truss" tool to trace the process, found that it processes something like "semop" ,"semctl","thread_waitlock","kread" kernel call . The trace log file looks like the... (0 Replies)
Hi,
I am seeing very high kernel usage and very high load averages on my system (Although we are not loading much data to our database). Here is the output of top...does anyone know what i should be looking at?
Thanks,
Lorraine
last pid: 13144; load averages: 22.32, 19.81, 16.78 ... (4 Replies)
Hi All.
In my production server the load is very high.
normally it used to be less than 1,but now it is more than 5.
I am new to unix all together.
I want to know what is the reason behind high load.
and if it is high what is the impact? (4 Replies)
Hi Buddies,
Thanx for reading my first post...
After googling a lot and searching so many forums I am feeling down a bit...
Please don't mind my ignorence, and my grammer ... :)
My server is running RHEL 2.6.9-5.EL. The cpu load is going higher than roof, almost 100 sometimes.
I am... (2 Replies)
Hi guys,
I need a script that will generate a core of a process when the process uses high cpu for a sustained period?
So for example if a process is using greater than 80% cpu for more than 30 minutes do "gcore /var/tmp/process.core pid" (1 Reply)
I'm not sure if this belong in dummies or advanced so I made my best guess. Go easy on me if I get it wrong.
I'm trying to determine what a high load for my system is. I run a php/mysql web server with a dedicated host. The host has a Intel Xeon 3110 (Dual Core) processor.
Our load seems to... (5 Replies)
i have a Intel Quad Core Xeon X3440 (4 x 2.53GHz, 8MB Cache, Hyper Threaded) with 16gig and 1tb harddrive with a 1gb port and my apache is causing my cpu to go up to 100% on all four cores heres my http.config
<IfModule prefork.c>
StartServers 10
MinSpareServers 10
MaxSpareServers 15... (4 Replies)
Hi ,
I am trying to :wall: my head while scripting ..I am really new to this stuff , never did it before :( .
how to find cpu's system high time and user time high in a script??
thanks , help would be appreciated !
:) (9 Replies)
Hi,
could someone give me an example for a debian server script? I need to check a process if the process has a high cpu load (top).
If yes the whole server needs to reboot.
Thats it, nothing more. ;)
Hope someone could help me.
Regards
woisch (2 Replies)
Discussion started by: woisch
2 Replies
LEARN ABOUT ULTRIX
systemd-volatile-root.service
SYSTEMD-VOLATILE-ROOT.SERVICE(8) systemd-volatile-root.service SYSTEMD-VOLATILE-ROOT.SERVICE(8)NAME
systemd-volatile-root.service, systemd-volatile-root - Make the root file system volatile
SYNOPSIS
systemd-volatile-root.service
/lib/systemd/systemd-volatile-root
DESCRIPTION
systemd-volatile-root.service is a service that replaces the root directory with a volatile memory file system ("tmpfs"), mounting the
original (non-volatile) /usr inside it read-only. This way, vendor data from /usr is available as usual, but all configuration data in
/etc, all state data in /var and all other resources stored directly under the root directory are reset on boot and lost at shutdown,
enabling fully stateless systems.
This service is only enabled if full volatile mode is selected, for example by specifying "systemd.volatile=yes" on the kernel command
line. This service runs only in the initial RAM disk ("initrd"), before the system transitions to the host's root directory. Note that this
service is not used if "systemd.volatile=state" is used, as in that mode the root directory is non-volatile.
SEE ALSO systemd(1), systemd-fstab-generator(8), kernel-command-line(7)systemd 237SYSTEMD-VOLATILE-ROOT.SERVICE(8)