07-29-2014
Quote:
Originally Posted by
sunnybee
Yes I got it. But I have to add VXVM VG into resource group. Hacmp not detecting the vxvm vg.
I am not sure what you mean. HACMP won't "detect" any VGs. You have created a VG and some filesystems within the VG, yes? You (try to) create a resource group including this VG, yes? or are you talking about
clharvest_vg? Might your problem be similar to (or even exactly)
this APAR?
Please describe your system better (if any of the following would yield sensitive data, feel free to edit the output prior to posting):
-
issue a lspv | grep -v None What is the output?
- use
/usr/es/sbin/cluster/utilities/cl_exportdefinition to create an XML-config file for your cluster and post it here.
- issue an
lsvg <VGinquestion> and post the output here
I hope this helps.
bakunin
10 More Discussions You Might Find Interesting
1. AIX
hi all
we upgraded hacmp(powerha) from 5.2 to 5.4 recently .
during the failover testing, we found a strange network issue. after standby node took service ip address (172.15.100.8) online at standby NIC, we were able to log in the standby node by telnet 172.15.100.8 which stays at... (1 Reply)
Discussion started by: rs6000er
1 Replies
2. AIX
I've configured multiple clusters using PowerHA 5.5, but never using the 'Two-node cluster configuration assistant'. I removed all the clusters, clean setup, and gave the assistant a try. I've filled in all the necessary options:
Communication Path to Takeover Node
Application Server
... (11 Replies)
Discussion started by: Koen87
11 Replies
3. AIX
I am new in AIX and please forgive my poor english.
I know that AIX allow same subnet IPs for different interfaces, which result in multipath routing / route striping.
My question is,
is there any best practice for the persistent and service IP with same subnet to stay on same interface, or... (5 Replies)
Discussion started by: skeyeung
5 Replies
4. AIX
Hello AIX GURU's
Can anybody tell me the steps to crate shared VG (enhanced concurent) for my Lpars from VIO server?
my questions are:
1.
Should I crate Enhanced Concurent VG in VIO and map it using virtual Scsi to Lpar?
or
2. Can I just create virtual SCSI in VIO and map to Lpar and... (1 Reply)
Discussion started by: Vit0_Corleone
1 Replies
5. AIX
Looking to find PowerHA with 3rd node used for communication (voting node) only. Does anyone use such configuration with IBM products? (2 Replies)
Discussion started by: gogogo
2 Replies
6. AIX
Few questions regarding Power HA ( previously known as HACMP) and VIOS POWERVM IVM ( IBM Virtualization I/O Server )
Is it possible to create HACMP cluster between two VIOS servers
Physical Machine_1
VIOS_SERVER_1
LPAR_1
SHARED_DISK_XX
VIOS_SERVER_2
Physical Machine_2
LPAR_2... (6 Replies)
Discussion started by: filosophizer
6 Replies
7. AIX
hello
ive installed powerha 7.1.3 on two servers aix 6.1.9 6100-09-03-1415
work with dmx4 EMC storgae.
after sync cluster ( terminate with OK ) ive see that the repository disk upper only in one machine :
hdiskpower60 00c7f6b59fc60d9d caavg_private active... (1 Reply)
Discussion started by: ariec
1 Replies
8. AIX
Hey guys, wondering if this is possible to accomplish.
PowerHA SystemMirror7.1 active/passive cluster. Restored a clustered system in test and upgraded to the latest version of PowerHA. Things are working great. However in the interest of time during cut over to the new system, I was hoping to... (4 Replies)
Discussion started by: j_aix
4 Replies
9. AIX
Hello Guys,
I was trying to upgrade the PowerHA from 6.1.0.9 to 7.1.3 in prod cluster. Have snapshot migration and run climgcheck.
1. Run climgcheck on node1(kul1pqcmur01) and it success
2. Upgrade the cluster sw
3. Run climgcheck on node2(kul1pqcmur02) and it failed with below errors
... (6 Replies)
Discussion started by: novaothers
6 Replies
10. AIX
Hi All,
As per the IBM upgrade/support matrix
IBM Techdocs Technote: PowerHA for AIX Version Compatibility Matrix
we can't do online upgrade or rolling migration from powerha v7.1.0 to v7.1.3. on AIX61_TL9_SP4, So we are following the steps as below ...
1 ) Bring down the cluster
2 )... (2 Replies)
Discussion started by: linux.amrit
2 Replies
vxdmp(7) Miscellaneous Information Manual vxdmp(7)
NAME
vxdmp - Veritas Volume Manager multipathing disk devices
DESCRIPTION
Multipathed disk devices in Veritas Volume Manager (VxVM) represent virtual devices with one or more physical access paths to a physical
disk. The Multipathing feature provides disk access reliability by dynamically switching to another physical path if there is a path fail-
ure.
Every disk that is visible to VxVM is represented by a multipath device node in the /dev/vx/dmp and /dev/vx/rdmp directories for block type
and character type interfaces. A simple disk is represented by a multipath device having one physical path, whereas a disk that is part of
a multiported disk array is represented by a multipath device with many device access paths depending upon the type of the disk array.
VxVM uses standard disk device naming conventions to name multipath devices. For example, if there is a disk device with two physical
access paths such as c1t0d0 and c2t0d0, the multipathing device node for this particular disk is created under /dev/vx/dmp and /dev/vx/rdmp
as c1t0d0 or c2t0d0.
To provide multipathing, VxVM maintains an internal database of all the multipathed devices detected by the system and their respective
paths. The database is created at system boot time. When disks are added or removed from the system, VxVM provides support to reconfigure
the multipath device database to reflect new states of the hardware, while the system is online.
To reconfigure the DMP database, run ioscan followed by insf, and then invoke vxdctl enable (see vxdctl(1M)).
The various access paths to a multipathed device can be seen by using a vxdisk command (see vxdisk(1M)). These commands open the multi-
pathing configuration device /dev/vx/dmpconfig to obtain the required information about the various paths to a multipathed device and their
states.
VxVM also provides the facility to enable or disable a disk controller. This feature can be used to stop all I/Os through a particular con-
troller to perform maintenance operations on it. Use the vxdmpadm command to do this and also perform other operations on the multipath
device database.
VxVM can provide notification about events that occur in the DMP database due to a change in hardware. See the vxnotify(1M) man page for
more information.
VxVM is capable of multipathing both Active/Active and Active/Passive disk arrays.
FILES
/dev/vx/dmp Multipathing block devices.
/dev/vx/rdmp Multipathing character devices.
SEE ALSO
ioctl(2), vxdctl(1M), vxdisk(1M), vxdmpadm(1M), vxnotify(1M)
VxVM 5.0.31.1 24 Mar 2008 vxdmp(7)