I've upgraded Iplannet 4.1 to Sun ONE Web Server 6.1. However. Now i can't seem to connect on port 4443 which was originally being used in 4.1 to deal with transactions....when i try to run a query on this port (4443) i get the following error:
Access to the server was denied
I suspect i... (1 Reply)
Anyone have tips on configuring the 2.6.10 kernel to take full advantage of dual 2.4 Ghz Xeons?
I'm not getting expected benchmark results.... and seemingly was better off with a single 2600+ AMD processor. (1 Reply)
I need to configure the iLOM for x4600 server. before I can set the IP details and commit, I need to set network state should be enabled. However my firmware is already the latest and I need not upgrade. I am not able to set the /SP/network state to enable. pls assist. i BELIEVE the bug was fixed... (5 Replies)
One of my X4600 server had a power loss and rebooted and now its giving me a strange problem servers internal disk controller naming has changed by itself ... the after failsafe boot md.conf file shows following c3txdx but shows internal disk at c4txdx ... what could be the reason for this and... (1 Reply)
Hi,
I perform clrs enable/disable resource-group to start/shutown sybase db.
If I do it through through scsetup , it asks for Do you require to change the state of resource "sybaseapp-rs" on individual nodes or zones that can master the resource (yes/no) ?.
I am bit confused of above... (1 Reply)
Hi Folks,
Has anyone seen these errors on bootup.
Mar 15 12:22:30 svc.startd: svc:/system/device/local:default: Method "/lib/svc/method/devices-local" failed due to signal SEGV.ht (c) 1983, 2010,
Oracle and/or its affiliates. All rights reserved.
Configuring devices. ... (1 Reply)
Hi All,
I am having an Sun fire X4600 M2 server where one of the interfaces is down.
I had requested for the replacement but had a bit problem in identifying the port.
As per the server service module, there are 4 NIC ports and one port is not flashing (e1000g0) but as per server, the port... (8 Replies)
Discussion started by: Rockyc3400
8 Replies
LEARN ABOUT OSX
core
CORE(5) BSD File Formats Manual CORE(5)NAME
core -- memory image file format
SYNOPSIS
#include <sys/param.h>
DESCRIPTION
A small number of signals which cause abnormal termination of a process also cause a record of the process's in-core state to be written to
disk for later examination by one of the available debuggers. (See sigaction(2).) This memory image is written to a file named by default
core.pid, where pid is the process ID of the process, in the /cores directory, provided the terminated process had write permission in the
directory, and the directory existed.
The maximum size of a core file is limited by setrlimit(2). Files which would be larger than the limit are not created.
The core file consists of the Mach-O(5) header as described in the <mach-o/loader.h> file. The remainder of the core file consists of vari-
ous sections described in the Mach-O(5) header.
NOTE
Core dumps are disabled by default under Darwin/Mac OS X. To re-enable core dumps, a privileged user must do one of the following
* Edit /etc/launchd.conf or $HOME/.launchd.conf and add a line specifying the limit limit core unlimited
* A privileged user can also enable cores with launchctl limit core unlimited
* A privileged user can also enable core files by using ulimit(1) or limit(1) depending upon the shell.
SEE ALSO gdb(1), setrlimit(2), sigaction(2), Mach-O(5), launchd.conf(5), launchd.plist(5), sysctl(8)HISTORY
A core file format appeared in Version 6 AT&T UNIX.
BSD June 26, 2008 BSD