Sponsored Content
Operating Systems AIX Install AIX , do i need hmc console Post 302908748 by rbatte1 on Thursday 10th of July 2014 06:25:18 AM
Old 07-10-2014
I had a very bad experience with a server partitioned with IVM, so running VIO natively and the user LPARs as guests. It all worked fine until we set up an HMC to manage it instead. If you have the option, go HMC first, or better still remote-redundant HMCs, so you have management from a remote site if you need it. Consider if you have a shutdown and your local HMC does not fire up, how would you start your server, the VIO servers and the user LPARs?

VIO servers can be great if used for the right purpose, i.e. sharing hardware and reducing the likelihood that a single failure will stop your operation. Others like plain LPARs based on available hardware. They may be slightly faster, but they are constrained by the physical configuration and resources may be allocated on a per-controller basis making it a little more difficult.


Robin
This User Gave Thanks to rbatte1 For This Post:
 

10 More Discussions You Might Find Interesting

1. AIX

AIX HMC LSCOD with space

I am trying to run the lscod command against an HMC that has managed system names with spaces. Tried enclosing the managed system names in quotes; single and double. How do I get the command to run? ssh hmcname lscod -m 'managed system 1' -t cap -r proc -c cuod Thanks, ~Donavon (0 Replies)
Discussion started by: djlerman
0 Replies

2. AIX

Unable to Switch tasks when trying to open console window in HMC

Hi, I am trying to open a console window through the HMC. When I choose to do this the toolbar at the top left of the HMC screen show 'Open Terminal Window'. However when I click on it I am getting the error - "The tsak you want to switch to is an applet based task, which dowes not support... (1 Reply)
Discussion started by: jimthompson
1 Replies

3. AIX

How to exit system console from HMC?

Hi, I ssh to HMC, then vtmenu, then start a system console from there. How do I exit the console to return to HMC prompt? I've tried the following two key combinations but none of them is working: (1) ~~ (2) Ctrl+[, Shift+( Thank you in advance! (4 Replies)
Discussion started by: aixlover
4 Replies

4. AIX

AIX and HMC installation issue

I started the AIX install with a fiber channel disk, and let it run: restricted by GSA ADP Schedule Contract with IBM Corp. . . . . . << End of copyright notice for perfagent.tools >>. . . . ... (2 Replies)
Discussion started by: Gideon1a
2 Replies

5. Solaris

HMC console fo SPARC machines

Hi I wonder how to create HMC console for machines where is SOLARIS10 installed SPARC platform ? Is there some free way ? thx for help. (6 Replies)
Discussion started by: presul
6 Replies

6. AIX

Upgrade AIX without HMC

Hi all, i would like to know if it's possible upgrade AIX 5.3 to 6.1 on a LPAR without use the HMC. so i would like to know if i must use the console to do it or i can do all from the up&running system on LPAR. Thanks in advance. Mario (4 Replies)
Discussion started by: Zio Bill
4 Replies

7. AIX

Install AIX lpar via hmc, can't access cd drive

Hi , I would like to access the cd drive of , i have power series server , and have lpars . I try to install AIX in an lpar via HMC, but it can't access the cd drive. how i can make installtion or make the the cd drive accessible in hmc or in power series server? Thanks in advance (2 Replies)
Discussion started by: prpkrk
2 Replies

8. AIX

View IP of HMC from AIX

Trying to get the IP address of the HMC connected to some servers running AIX 6 and 7. I thought this would be as easy as running 'lsrsrc IBM.MCP IPAddresses', but when I run that command, the resource is empty. Is there some where else I should be looking, or is there a reason why this resource... (5 Replies)
Discussion started by: acascianelli
5 Replies

9. AIX

AIX: DLPAR VFC - HMC v9

Hey All, I have running dual VIOS on a P9 systems, and just created a new LPAR profile. My objective is to create LPAR Client VFC adapters, and then DLPAR VFC Server adapters on the VIOS. In the HMC v9 Enhanced GUI, I have DLPAR a VFC adapter to both VIOS, however, you can't specify the... (1 Reply)
Discussion started by: aixkidbee
1 Replies

10. UNIX for Beginners Questions & Answers

Hmc lpar console integration

We want to integrate powervm by using openstack with hmc. Now we encounter problem with the console, we can open the terminal within hmc, and I think hmc using tech java applet. sample applet code like <applet codebase="https://172.16.28.174/hmc/"... (0 Replies)
Discussion started by: eagle
0 Replies
ftpshut(1)						      General Commands Manual							ftpshut(1)

NAME
ftpshut - create shutdown message file to shut down the ftp servers at a given time SYNOPSIS
time [ warning-message ... ] DESCRIPTION
The command provides an automated shutdown procedure that a superuser can use to notify ftp users when the ftp server is shutting down. This command will create a shutdown message file in the path specified by the 'shutdown' directive in the file in the real, anonymous and virtual user accounts. For guest accounts the system administrator must copy the message file created in the real user account to the guest accounts manually. The server will check this file regularly to see if the server is going to be shut down. This option causes the program to display copyright and version information, then terminate. This option is used as deny_offset. New FTP access is disabled 'min' minutes before shutdown. The default value of 'min' is 10 minutes. This value can be reset by the user. This option is used as disc_offset. All current FTP connections will be dropped 'min' minutes before shutdown. The default value of 'min' is 5 minutes. This value can be reset by the user. time time, is the time at which the ftp server will be shutdown. If is set to the word `now' the shutdown will be immedi- ate. time can also be set to a future time. Future time can be specified in one of the two formats: + number or HHMM. The first format brings the ftp servers down in number minutes. The second format brings the ftp servers down at the time of day indicated, using a 24-hour clock format. warning-message The warning-message is the message the server will flash to its clients on shut down. The user can use a message of his choice or use the 'macros' or 'magic cookies' that are available. The server will replace the macro with the specified text string. The warning-message will be formatted to be 75 characters long, including the length of any expanded macros ("magic cookies"). The default warning message is "System shutdown at %s". The following magic cook- ies are available: %s time system is going to shut down %r time new connections will be denied %d time current connections will be dropped %C current working directory %E the maintainer's email address as defined in ftpaccess %L local host name %M maximum allowed number of users in this class %N current number of users in this class %R remote host name %T local time (form Thu Nov 15 17:12:42 1990) %U username given at login time WARNINGS
You can kill the servers only between now and 23:59, if you use the absolute time for EXIT STATUS
returns: 0 successful 1 failure -1 the wrong parameter was passed to AUTHOR
was developed by the Washington University, St. Louis, Missouri. SEE ALSO
ftpaccess(4) ftpshut(1)
All times are GMT -4. The time now is 06:34 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy