I have 2 VIO servers and a network connection to each of them in an etherchannel so running entstat against the individually adapters doesn't work.
I do see this info in the entstat output for the etherchannel. Since virtual adapters don't really have "links", I think the comparative is "LAN State":
I have installed in the server a quad ethernet adapter, I'm using two interfaces with two different IP networks, both interfaces are connected to a switch, the switch report that is receiving the same MAC address in both ports so must of the times I have connectivity problems.
Any idea to change... (1 Reply)
I have a Dual Boot system - XP with Solaris 10. I built the system from the ground up with different components and the Ethernet Card built into the Motherboard is a Marvell Yukon Gigabit Ethernet 10/100/1000 T-base, RJ-45 Copper.
I am unable to go to the Web as the Ethernet Card is still not... (2 Replies)
Hi,
In our AIX 5.2 server , we have one unused ethernet adapter which doesn't have cable connection . For this interface , we are getting alerts in errpt .
Could you suggesthow to stop this alert ? And sametime i would like to keep this device in ODM .
Is there... (1 Reply)
All
I am trying allocate an IVE to an LPAR (not a VIO) running AIX 7.1. I am getting the error:
HSCL068A
Explanation
Logical port can not be assigned to Logical Partition because this Logical Partition is not the promiscuous LPAR for the physical port.
Has anyone encountered this... (1 Reply)
Hi,
I have installed Oracle Enterprise Linux 5 in my PC. After the installation the Ethernet Card is not got detected.
But I could able to get the details using the command lspci -a:
01:00.0 Ethernet controller: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0).
But I could... (4 Replies)
Hi
In the vio server when I do # lsattr -El hdisk*, I get a PVID. The same PVID is also seen when I put the lspv command on the vio client partition. This way Im able to confirm the lun using the PVID.
Similarly how does the vio client partition gets the virtual ethernet scsi client adapter... (1 Reply)
Hi,
Does anybody have a "Sun 10-Gigabit Ethernet Adapter installation CD" or driver ixge for Sun 10-Gigabit Ethernet PCI-X adapter? I need it but can't find it anywhere. So if you know where I can download it or purchase it, please let me know. (Already tried Oracle's website, don't have it) ... (5 Replies)
Hi Community,
i have one issue with 10 fiber ethernet adapter.
here is my details:
root@new-bpel.example.com #dladm show-dev
bge0 link: unknown speed: 0 Mbps duplex: unknown
bge1 link: up speed: 1000 Mbps duplex: full
qlge2 link:... (4 Replies)
Hello community, I have a Proliant HP DL380P with the following network adapters:
NetXtreme BCM5719 Gigabit Ethernet PCIe (Ethernet 1Gb 4-port 331FLR Adapter)
82580 Gigabit Network Connection (NC365T 4-port Ethernet Server Adapter)
I installed Red Hat 7.2 but it recognizes only the... (9 Replies)
Discussion started by: Lord Spectre
9 Replies
LEARN ABOUT PHP
ng_vlan
NG_VLAN(4) BSD Kernel Interfaces Manual NG_VLAN(4)NAME
ng_vlan -- IEEE 802.1Q VLAN tagging netgraph node type
SYNOPSIS
#include <sys/types.h>
#include <netgraph.h>
#include <netgraph/ng_vlan.h>
DESCRIPTION
The vlan node type multiplexes frames tagged according to the IEEE 802.1Q standard between different hooks.
Each node has two special hooks, downstream and nomatch, and an arbitrary number of ``vlan'' hooks, each associated with a particular VLAN
tag.
An ETHERTYPE_VLAN frame received on the downstream hook with a tag that the node has been configured to filter is sent out the corresponding
``vlan'' hook. If it does not match any of the configured tags, or is not of a type ETHERTYPE_VLAN, it is sent out the nomatch hook. If the
nomatch hook is not connected, the packet is dropped.
An Ethernet frame received on the nomatch hook is passed unmodified to the downstream hook.
An Ethernet frame received on any of the ``vlan'' hooks is tagged accordingly and sent out the downstream hook.
HOOKS
This node type supports the following hooks:
downstream Typically this hook would be connected to a ng_ether(4) node, using the lower hook.
nomatch Typically this hook would also be connected to an ng_ether(4) type node using the upper hook.
<any valid name>
Any other hook name will be accepted and should later be associated with a particular tag. Typically this hook would be attached
to an ng_eiface(4) type node using the ether hook.
CONTROL MESSAGES
This node type supports the generic control messages, plus the following:
NGM_VLAN_ADD_FILTER (addfilter)
Associates a hook with the tag.
NGM_VLAN_DEL_FILTER (delfilter)
Disassociates a hook from the tag.
NGM_VLAN_GET_TABLE (gettable)
Returns a table of all hook/tag associations.
EXAMPLES
#!/bin/sh
ETHER_IF=rl0
ngctl -f- <<EOF
shutdown ${ETHER_IF}:
mkpeer ${ETHER_IF}: vlan lower downstream
name ${ETHER_IF}:lower vlan
connect ${ETHER_IF}: vlan: upper nomatch
EOF
ngctl mkpeer vlan: eiface vlan123 ether
ngctl msg vlan: addfilter '{ vlan=123 hook="vlan123" }'
SHUTDOWN
This node shuts down upon receipt of a NGM_SHUTDOWN control message, or when all hooks have been disconnected.
SEE ALSO netgraph(4), ng_eiface(4), ng_ether(4), ngctl(8), nghook(8)HISTORY
The ng_vlan node type appeared in FreeBSD 4.10.
AUTHORS
Ruslan Ermilov <ru@FreeBSD.org>
BSD March 1, 2004 BSD