Ah, yes, there are three disks in use on each controller. Whoever initially set this up wasn't thinking and didn't keep the mirrors on distinct controllers since some volumes have data on both sides but the mirror on the other. For instance:
So if I lose controller 1/10/0 I lose lvol5. But that's a whole other issue.
hi, i was trying to mirror root volume group and the command i was using didnt respond for a long time
mirrorvg -m rootvg hdisk1
I was checking rootvg and it gives below. how do i fix stale partitions?? it seems to be on hdisk1
LV NAME TYPE LPs PPs PVs LV STATE ... (2 Replies)
hi All
I have one RP 3410 server with hp-ux 11.23 mirror disk
it's lvdislay -v /dev/vg00/lvol4 shows stale in some location
Actual is current
pls help me to resolve the probem
I have check with lvsync command and vgsync
but not working
re
Rajesh (1 Reply)
There are a filesystem /GWD/appbase/projects/GRIDDB
Under this filesystem there is a directory called backup.
But When I am trying to access the backup directory ,it is showing me the following error:
# cd /GWD/appbase/projects/GRIDDB
# cd backup
-bash: cd: backup: Stale NFS file handle
... (3 Replies)
my AIX server used to have scsi disk hdisk4. Now i removed that disk. But still it is still listed in lspv. So how can i remove the stale entry of it ? (6 Replies)
HP-UX B.11.23 U ia64
I've got two users that show in "w" with long idle times but if I search for their processes I find nothing (ps -ef | grep username )
I'm not sure why "w" still sees them and if there is anything (short of a reboot) that I can do to clean them out.
Ideas? (8 Replies)
Any package that I try to install, is giving an error of 'lock':
# pkgadd -d openssl-1.0.0g-sol10-sparc-local
The following packages are available:
1 SMCossl openssl
(sparc) 1.0.0g
Select package(s) you wish to process (or 'all' to process
all packages).... (2 Replies)
Hi friends,
the paging lv hd6 is in stale condition
hd6 paging 48 96 2 open/stale N/A
And i'am getting the following alerts in the server 333BD283 0811044814 U S LVDD Bad block detected with no relocation al
333BD283 0811041114 U S LVDD ... (1 Reply)
Hi everybody,
I have a little problem with my AIX 6.1, PowerHA 6.1 LVM mirror. After problem with SAN pathing of our one Datacenter, I have LV at stale state.
# lsvg cpsdata2vg
VOLUME GROUP: cpsdata2vg VG IDENTIFIER: 00fb518c00004c0000000169445f4c2c
VG STATE: ... (6 Replies)
Discussion started by: Necronomic
6 Replies
LEARN ABOUT OPENSOLARIS
pcata
pcata(7D) Devices pcata(7D)NAME
pcata - PCMCIA ATA card device driver
SYNOPSIS
pcata@socket#:a -u
pcata@socket#:a -u,raw
DESCRIPTION
The PCMCIA ATA card device driver supports PCMCIA ATA disk and flash cards that follow the following standards:
o PC card 2.01 compliance (MBR+fdisk table required for all platforms).
o PC card ATA 2.01 compliance.
o PC card services 2.1 compliance.
The driver supports standard PCMCIA ATA cards that contain a Card Information Structure (CIS). For PCMCIA, nodes are created in /devices
that include the socket number as one component of the device name referred to by the node. However, the names in /dev, /dev/dsk, and
/dev/rdsk follow the current conventions for ATA devices, which do not encode the socket number in any part of the name. For example, you
may have the following:
+----------------+-----------------------------------+---------------------+
|Platform | /devices name | /dev/dsk name |
+----------------+-----------------------------------+---------------------+
|x86 | /devices/isa/pcic@1,3e0 /disk@0:a | /dev/dsk/c1d0s0 |
+----------------+-----------------------------------+---------------------+
|SPARC | /devices/iommu@f,e0000000 | /dev/dsk/c1d0s0 |
| | /sbus@f,e0001000 /SUNW, pcm- | |
| | cia@3,0 /disk@0:a | |
+----------------+-----------------------------------+---------------------+
PRECONFIGURATION
If a PC Card ATA device is recognized, the pcata driver is automatically loaded, IRQs allocated, devices nodes created, and special files
created (if they do not already exist).
Known Problems and Limitations
o You need to umount the file system before removing the disk.
o The ufs file systems on removable media (PC Card ATA) should have one of the onerror={panic, lock, umount} mount options set.
CONFIGURATION
Configuration topics include initial installation and configuration, identifying an unrecognized device, special files and hot-plugging.
Initial Installation and Configuration
1. Install the Solaris software.
2. Boot the system.
3. Insert the PC card ATA device.
Identifying an Unrecognized Device
If you insert a PC card ATA device and it is not recognized (no special files created), use the prtconf command to identify the problem.
1. Run the prtconf -D command to see if your pcata card is recognized. (A recognized device will appear at the end of the prtconf
output. For example:
# prtconf -D
. . .
pcic, instance #0 (driver name: pcic)
. . .
disk, instance #0
2. If pcata does not appear in the prtconf output, there is a problem with the PC card adapter configuration or with the hardware.
Check to see whether the problem is with the card or the adapter by trying to use the card on another machine and by seeing if
it works on the same machine using DOS.
Special Files
For PC card devices, nodes are created in /devices that include the socket number as one component of a device name that the node refers
to. However, the /prtc/dev names and the names in /dev/dsk and /dev/rdsk do follow the current convention for ATA devices, which do not
encode the socket number in any part of the name.
Hot-Plugging
o If you want to remove the disk, you must unmount the file system.
o Use the mkfs_pcfs(1M) command to create a pcfs file system:
# mkfs -F pcfs /dev/rdsk/c#d#p0:d
o To mount a pcfs file system, type:
# mount -F pcfs /dev/dsk/c#d#p0:c /mnt
o If you want to create a ufs file system, use the newfs command and type:
# newfs /dev/rdsk/c#d#s#
o To mount a ufs file system, type:
# mount -F ufs /dev/dsk/c#d#s# /mnt
o To create a Solaris partition, run the format command and go to the Partition menu. For more information, see the format(1M) man
page.
FILES
/kernel/drv/pcata pcata driver
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWpsdpr |
+-----------------------------+-----------------------------+
SEE ALSO format(1M), mount(1M), newfs(1M), pcmcia(7D), attributes(5), pcfs(7FS)SunOS 5.11 2 Mar 2007 pcata(7D)