---------- Post updated at 05:18 AM ---------- Previous update was at 05:17 AM ----------
---------- Post updated at 05:22 AM ---------- Previous update was at 05:18 AM ----------
Hello Don,
That's not working as well, it's creating a file named 1 with no data and creating another file testoutput.txt with only succeeded one's not failed one's.
please advice.
code :
Last edited by sknovice; 06-02-2014 at 09:02 AM..
Reason: Sorry , I copied the old source, I am using -zv instead of -z
Hi All,
I need an automation script to check the connectivity between 2 UNIX servers.
Could anybody please help in this regards?
regards,
janardhan (1 Reply)
We have two servers A and B (both running Solaris 10) out of which one is application server and the other is database server. The two servers faced certain network issues and the two servers were temporarily disconnected.this happened around 5AM GMT monday.Can anyone suggest some log files or... (2 Replies)
HI I have made a connection with external server which is also UNIX. I was tryign connectivity with this by telnet which fails and ping i sshowing socket is alive and traceroute tells the asterisk astersik:traceroute to 153.88.182.28 (153.88.182.28), 30 hops max, 8080 byte packets
1 * * *
2 *... (1 Reply)
hi all
just installed the netsec.options.tcpwrapper from expansion pack, which used to be a rpm, for my aix 6.1 test box.
it is so unpredictable. i set up the hosts.deny as suggested for all and allow the sshd for specific ip addresses/hostnames.
the tcpdchk says the hosts allowed and... (0 Replies)
Hi All
I am having issues using ftp between a solaris 10 server to a HP-UX 11.31 server, but from the solaris server to the hp-ux I am able to ping. This is what I have done so far:
in the solaris server:
root@MPCRS01 # svcs -a | grep ftp
online Jul_26 svc:/network/ftp:default... (12 Replies)
Hello,
I have a requirement to check the tcp network connectivity between server it's running on and the list of host's and ports combination.
i have written the below code but it doesn't work, but when i execute the nc command outside the script it works fine.
please help me where i am... (8 Replies)
Newbie with UNIX here.
Currently troubleshooting a UNIX terminal we have.
I determined it to be bad and swapped it out with a known good terminal. I went in and changed the IP address and host name to reflect the old terminal. Although now there is no connectivity.
I swapped out the NIC... (1 Reply)
Hi everyone!
Some time ago, I had to check connectivity with a big list of hosts, using different formats (protocol://server:port/path/, server:port, ....).
I developed a script that checks the connectivity using different commands (ping, telnet, nc, curl).
It worked for me so I'm sharing it... (9 Replies)
I am trying to establish passwordless connectivity between server A and server B, but unsuccessfuly, because I beleive two issues.
the first one is that on both servers, it is not possible to use root to login, it only allows to connect using a user (any) them su - root, which in turns I am able... (1 Reply)
Discussion started by: fretagi
1 Replies
LEARN ABOUT OSF1
ip6_setup
ip6_setup(8) System Manager's Manual ip6_setup(8)NAME
ip6_setup - IPv6 configuration program
SYNOPSIS
/usr/sbin/ip6_setup
DESCRIPTION
The ip6_setup utility allows you to configure the IPv6 networking software on your system.
To run ip6_setup, enter the following command and then answer the questions: # ip6_setup
You must know your Internet Protocol Version 6 (IPv6) address. If your network uses subnet routing, you must know the subnet mask for your
network. The network manager should be able to provide you with the information that you need.
After the ip6_setup command completes, the network services on the system can be restarted manually with the following command: #
/usr/sbin/rcinet restart
Before you restart the network services with the preceding command, warn the users that the network services on the system are being
removed. File systems that were not mounted using the /etc/fstab file or the automount command must be unmounted with the unmount command.
You must remount these file systems using the mount command after the network is started on your system.
Alternatively, you can reboot the system with the following command: # /usr/sbin/shutdown -r now
FILES
Specifies the host name file. Specifies the environment variables that define the network configuration on your system. Specifies the
trusted hosts file. Specifies the network name file. Specifies Internet routing information. Specifies Internet routing information.
SEE ALSO
Commands: mount(8), rcinet(8)
Files: gateways(4), hosts(4), hosts.equiv(4), networks(4), routes(4).
Network Administration
ip6_setup(8)