i have been trying to extract multiple lines based on two different patterns as below:-
file1
I need to extract the ip address, for example: 192.2.3 and print all the lines start from "@" until it reaches the next "@" like below:-
output
for each line in bold (first line of each record), there is \n at the end.
the codes that i tried:-
and tried to find and match 192.2.3. by grep and etc but did not get the right output. Can anyone tell me how to run two awk commands for implementing 2 different things one after another such as a case like this? I tried some that i found but none is successful. I am still trying my best to learn and understand awk and sed. Thanks
I have a very large file (10,000,000 lines), that contains a sample id and a property of that sample. I have another file that contains around 1,000,000 lines with sample ids that I want to remove from the original file (create a new file without these lines).
I know how to do this in Perl, but it... (9 Replies)
Dear all,
I need to search multiple patterns and then I need to print their respective next lines. For an example, in the below table, I will look for 3 different patterns :
1) # ATC_Codes:
2) # Generic_Name:
3) # Drug_Target_1_Gene_Name:
#BEGIN_DRUGCARD DB00001
# AHFS_Codes:... (3 Replies)
I have two files. The first containing a header and six columns of data.
Example file 1:
Number SNP ID dbSNP RS ID Chromosome Result_Call Physical Position
787066 SNP_A-8575395 RS6650104 1 NOCALL 564477
786872 SNP_A-8575125 RS10458597 1 AA ... (13 Replies)
I need to print out sections (varying numbers of lines) of a file between patterns. That alone is easy enough: sed -n '/START/,/STOP/' I also need the 3 lines BEFORE the start pattern. That alone is easy enough: grep -B3 START But I can't seem to combine the two so that I get everything between the... (2 Replies)
Hi,
I want to print only lines (green-italic lines) in between first and last strings in column 9.
there are different number of lines between each strings.
10 AUGUSTUS exon 4558 4669 . - . 10.g1
10 AUGUSTUS exon 8771 8889 . ... (6 Replies)
Hi Gurus,
I have a requirement where I need to display all lines between 2 patterns except the line where the first pattern in it. I tried the following command using awk but it is printing all lines except the lines where the 2 patterns exist.
awk '/TRANSF_/{ P=1; next } /Busy/ {exit} P'... (9 Replies)
Hi
I need to egrep patterns in a file and limit number of matches to print for each matched pattern.
-m10 option is not working out in my sun solaris 5.10
Please guide me the options to achieve.
if i do head -10 , i wont be getting all pattern match results as output since for a... (10 Replies)
In the awk below I am trying to output those lines that Match between file1 and file2, those Missing in file1, and those missing in file2. Using each $1,$2,$4,$5 value as a key to match on, that is if those 4 fields are found in both files the match, but if those 4 fields are not found then missing... (0 Replies)
Hi, I need to print lines which are matching with start pattern "SELECT" and END PATTERN ";" and only select the last "select" statement including the ";" .
I have attached sample input file and the desired input should be as:
INPUT FORMAT:
SELECT
ABCD,
DEFGH,
DFGHJ,
JKLMN,
AXCVB,... (5 Replies)
Discussion started by: nani2019
5 Replies
LEARN ABOUT NETBSD
route.conf
ROUTE.CONF(5) BSD File Formats Manual ROUTE.CONF(5)NAME
route.conf -- static routes config file
DESCRIPTION
The route.conf file is read by the staticroute rc.d script during system start-up and shutdown, and is intended for adding and removing
static routes.
FILE FORMAT
Lines starting with a hash ('#') are comments and ignored. Lines starting with a plus sign ('+') are run during start-up, while lines start-
ing with a minus sign ('-') are run during system shutdown. If a line starts with a '!', the rest of the line will get evaluated as a shell
script fragment. All other lines are passed to route(8). During start-up, they are passed behind a ``route add -'' command and during shut-
down behind a ``route delete -'' command.
FILES
/etc/route.conf The route.conf file resides in /etc.
/etc/rc.d/staticroute
rc.d(8) script that parses route.conf.
EXAMPLES
In this example, the interface for the desired routing changes is set, the IP address on that interface is determined, and a route is added
during startup, or deleted during system shutdown.
# Set interface and determine current IP address for added route.
!ifname=bnx0
!ipaddr=$(/sbin/ifconfig ${ifname} | awk '$1 == "inet" {print $2}')
net 10.10.1 -interface ${ipaddr}
In this example, IP forwarding is turned on during start-up, and a static route added for 192.168.2.0. During system shutdown, the route is
removed and IP forwarding turned off.
# Turn on/off IP forwarding.
+sysctl -w net.inet.ip.forwarding=1
-sysctl -w net.inet.ip.forwarding=0
net 192.168.2.0 -netmask 255.255.255.0 192.168.150.2
SEE ALSO rc.conf(5), rc(8), route(8)BSD May 1, 2012 BSD