Ethernet Port device path? Post: 302901627

8 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

determining ethernet port speed in solaris

i purchased, what was labeled as a 4-port fast ethernet sbus card from ebay. i installed it in my ultra1, and it seems to be working fine. how can i determine if the card is infact a fast ethernet card vs. the standard ethernet 4-port card?

2. UNIX for Dummies Questions & Answers

serial port device path

hi. Im trying to install a switch. And the manual says i should type a command including a SerialPortDevicePath. which is the filepath to serial port used for connection. However.. nothing about how to find this info. Could anyone help me where to find this path? thx mr.T

3. Solaris

Reg. Ethernet port

Hi Friends, I am using intel system installed solaris 10, when i check ifconfig -a it doesn't show any thing eg-for HP servers hme0, for sun servers-iprb0. for me it doesn't show any thing, and tell me what files to be modified. Thanks in Advance.

4. Solaris

Ethernet Port Name

I have a new Sun 440 and I am trying to configure it. Non of the Ethernet ports are enabled; when I issue "ifconfig -a" it returns nothing. Is there a way to know the available port name (e.g. ce, bge, etc.) by running a command or so ?

5. Linux

Do linux have a device file for ETHERNET CARD.

Sir, Do linux have device file for ethernet card. Can I use open , read , write , system calls to read data transferred through LAN. Is there any methods to read network datas (with out header and tailor information). Hope anyone can help me out. Thanking you.... ...

6. Red Hat

Oracle RAC -- changing ethernet device name

I have a RAC setup that was configured before I started at my new company. I would like to reconfigure the network devices and change the names. How complex is this regarding the Oracle RAC environment? Does the Oracle RAC rely on the device name or is it only relying on the IP information? ...

7. Red Hat

Unable To Activate Ethernet Network Device in RHEL 5.5 - e100 device eth0 does not seem to be presen

Hi All, Could anyone please help to resolve the below problem. I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error. I spent 2 days for the above and go through with several suggestion found by googling. But no luck. ...

8. UNIX for Advanced & Expert Users

Command to see the logical volume path, device mapper path and its corresponding dm device path

Currently I am using this laborious command lvdisplay | awk '/LV Path/ {p=$3} /LV Name/ {n=$3} /VG Name/ {v=$3} /Block device/ {d=$3; sub(".*:", "/dev/dm-", d); printf "%s\t%s\t%s\n", p, "/dev/mapper/"v"-"n, d}' Would like to know if there is any shorter method to get this mapping of...

LEARN ABOUT NETBSD

ng_device

NG_DEVICE(4)						   BSD Kernel Interfaces Manual 					      NG_DEVICE(4)

NAME

     ng_device -- device netgraph node type

SYNOPSIS

     #include <netgraph/ng_device.h>

DESCRIPTION

     A device node is both a netgraph node and a system device interface.  When a device node is created, a new device entry appears which is
     accessible via the regular file operators such as open(2), close(2), read(2), write(2), etc.

     The first node is created as /dev/ngd0, all subsequent nodes /dev/ngd1, /dev/ngd2, etc.

HOOKS

     A device node has a single hook with an arbitrary name.  All data coming in over the hook will be presented to the device for read(2).  All
     data coming in from the device entry by write(2) will be forwarded to the hook.

CONTROL MESSAGES

     The device node supports one non-generic control message:

     NGM_DEVICE_GET_DEVNAME
	  Returns device name corresponding to a node.

SHUTDOWN

     This node shuts down upon receipt of a NGM_SHUTDOWN control message, or upon hook disconnection.  The associated device entry is removed and
     becomes available for use by future device nodes.

SEE ALSO

     netgraph(4), ngctl(8)

HISTORY

     The device node type was first implemented in FreeBSD 5.0.

AUTHORS

     Mark Santcroos <marks@ripe.net>
     Gleb Smirnoff <glebius@FreeBSD.org>

BSD
								 October 19, 2004							       BSD