Assuming only the traffic (which is destined to a contiguous address IPv6 block say a /64) reaches an interface (physical or virtual) by means of routing and/or filtering rules. The original question remains.
BTW: I know both BSD and Linux have ways of assigning IPs to an interface.
Let's stick with Linux for now.
I have a block of IPv6 addresess (say 1111::/64) that I routed and filtered such that only these addresses hit eth0.
then I know I can for instance say
and so on up to
which I believe it becomes unmanageable hence the original question.
Any other suggestion or hints besides using a raw socket and implementing my own stack which is doable but I do not really want to reinvent the wheel since all that is already in the kernel.
I know there is a function inet_tpon for unix platforms to validate ipv6 addresses.But i need an equivalent of windows.When i use this function with the header file <winsock2.h> the visual studio 2005 on win2003 issues an error saying identifier not found
:confused: (3 Replies)
I m having interface ce0 ce1 and its sub interfaces for that.
I want to give MAC addresses for the same.
How will I assign it.
Please give solution for the same (4 Replies)
Hi ,
by default the physical interface (eth1) and virtual interface eth1:0 will be having same mac address, is there any way we can assign separate mac addresses for both the interfaces.
would some one help me out in this.
Thanks
Gopi (1 Reply)
Hi,
inspired by this article, I decided to implement IPMP + IPv6 in Solaris 10.
It worked for me only this way:
1. Setup
# cat /etc/hostname*
10.23.10.113/24 broadcast + group data failover up <- hostname.e1000g0
0.0.0.0/24 broadcast + group data -failover deprecated up standby... (3 Replies)
Hi, anyone has had experience in a static setting an IPv6 interface?, I'm trying accordance with the admin guide (ipv6 network configuration tasks), configure one interface in the server, actually i can do ping to my default gateway and access the Internet in IPv6, the specific point is however,... (3 Replies)
Hi,
Am using FreeBSD7.4/i386
During IPv6 configuration, I added the following in rc.conf as
Restarted IPv6 network using /etc/rc.d/network_ipv6 restart..
My problem is I need to set link local IPv6 address auto-configured..
Is my proceeding right??
I feel something missing to make... (0 Replies)
Hi All,
Would anyone know how to modify the below, so only the IPv6 address (red) is printed, please?
(in other words, what's between inet6 and the / sign)
ipv6=`/sbin/ifconfig lo0:5 inet6 | grep 'inet6'`
print $ipv6
Currently the output of the above script is:
inet6... (7 Replies)
Hi,
I have created a bonding bond1 interface with 6 Eth , mode=4. Recently i have changed my old ipv6 to new one and tried to restart as well as reload network service. Post which i can see old as well as changed ipv6 in ifconfig command output. Below are few files and command output for your... (1 Reply)
Hello dears
how to assign IPv4 and IPv6 addresses with same interface on solaris 10 (1 Reply)
Discussion started by: ttashman
1 Replies
LEARN ABOUT PLAN9
tc-matchall
Match-all classifier in tc(8) Linux Match-all classifier in tc(8)NAME
matchall - traffic control filter that matches every packet
SYNOPSIS
tc filter ... matchall [ skip_sw | skip_hw ] [ action ACTION_SPEC ] [ classid CLASSID ]
DESCRIPTION
The matchall filter allows to classify every packet that flows on the port and run a action on it.
OPTIONS
action ACTION_SPEC
Apply an action from the generic actions framework on matching packets.
classid CLASSID
Push matching packets into the class identified by CLASSID.
skip_sw
Do not process filter by software. If hardware has no offload support for this filter, or TC offload is not enabled for the inter-
face, operation will fail.
skip_hw
Do not process filter by hardware.
EXAMPLES
To create ingress mirroring from port eth1 to port eth2:
tc qdisc add dev eth1 handle ffff: ingress
tc filter add dev eth1 parent ffff:
matchall skip_sw
action mirred egress mirror
dev eth2
The first command creats an ingress qdisc with handle ffff: on device eth1 where the second command attaches a matchall filters on it that
mirrors the packets to device eth2.
To create egress mirroring from port eth1 to port eth2:
tc qdisc add dev eth1 handle 1: root prio
tc filter add dev eth1 parent 1:
matchall skip_sw
action mirred egress mirror
dev eth2
The first command creats an egress qdisc with handle 1: that replaces the root qdisc on device eth1 where the second command attaches a
matchall filters on it that mirrors the packets to device eth2.
To sample one of every 100 packets flowing into interface eth0 to psample group 12:
tc qdisc add dev eth0 handle ffff: ingress
tc filter add dev eth0 parent ffff: matchall
action sample rate 100 group 12
SEE ALSO tc(8),
iproute2 21 Oct 2015 Match-all classifier in tc(8)