Sponsored Content
Operating Systems Solaris Solaris 11 2nd nic for different subnet Post 302898114 by ad101 on Friday 18th of April 2014 05:37:29 PM
Old 04-18-2014
Question Solaris 11 2nd nic for different subnet

I have a Solaris 11 machine with 2 network cables attached. The first one is the default route and is working okay. I am trying to activate the second on another subnet, but am sure missing something.

The first one is on 10.30.128. and with it everything works fine,
but when I try to add the second to 10.30.134. subnet, all hosts on that subnet become inaccessible, and of course the second address is not reachable from outside.

Here's the details, I started with:
Code:
# ipadm
NAME              CLASS/TYPE STATE        UNDER      ADDR
lo0               loopback   ok           --         --
   lo0/v4         static     ok           --         127.0.0.1/8
   lo0/v6         static     ok           --         ::1/128
net0              ip         ok           --         --
   net0/v4        static     ok           --         10.30.128.22/24

# route -p show
persistent: route add default 10.30.128.126

I then added
Code:
# ipadm create-ip net1
# ipadm create-addr -T static -a 10.30.134.22/24 net1/v4
# route add 10.30.134.0/24 10.30.134.126

After this, nothing in the .134 subnet is visible, and I cannot ping the second address from outside.

Do I need to restart anything?
output of ipadm and netstat after the changes are below.

Thanks for your help.

Code:
# ipadm
NAME              CLASS/TYPE STATE        UNDER      ADDR
lo0               loopback   ok           --         --
   lo0/v4         static     ok           --         127.0.0.1/8
   lo0/v6         static     ok           --         ::1/128
net0              ip         ok           --         --
   net0/v4        static     ok           --         10.30.128.22/24
net1              ip         ok           --         --
   net1/v4        static     ok           --         10.30.134.22/24


# netstat -rn

Routing Table: IPv4
  Destination           Gateway           Flags  Ref     Use     Interface
-------------------- -------------------- ----- ----- ---------- ---------
default              10.30.128.126        UG        4      23339
10.30.128.0          10.30.128.22         U         8    5947865 net0
10.30.134.0          10.30.134.126        UG        2         11
10.30.134.0          10.30.134.22         U         3         28 net1
127.0.0.1            127.0.0.1            UH        2       2532 lo0

# dladm show-phys
LINK              MEDIA                STATE      SPEED  DUPLEX    DEVICE
net1              Ethernet             up         100    full      igb1
net3              Ethernet             unknown    0      unknown   igb3
net0              Ethernet             up         100    half      igb0
net2              Ethernet             unknown    0      unknown   igb2
net6              Ethernet             up         100    half      vsw0
net5              Ethernet             up         10     full      usbecm2

 

8 More Discussions You Might Find Interesting

1. IP Networking

add route to a subnet - Solaris 2.6

WE are running Unix - Solaris 2.6, we create a subnet. In the windows enviroment we are able to add a static route by using route add -p 172.16.10.0 mask 255.255.255.0 172.16.17.224, but when we add the route in Solaris as route add -net 172.16.10.0 255.255.255.0 172.16.17.224, we receive an... (5 Replies)
Discussion started by: cassy
5 Replies

2. IP Networking

Migrating existing Subnet to a new subnet and changing ip addresses in UNIX

Hi, My project needs to migrate the existing Subnet (255.255.255.0) to a new subnet and change the ipaddresses (currently C class). How can I do that. I need some information. John (0 Replies)
Discussion started by: johnmarsh
0 Replies

3. Solaris

NIC drivers+solaris 10

Installed solaris 10 and now i want to connect to internet,to make work this i need to NIC drivers can some body tell me is it possible to get drivers and how to install. I am dying to get rid of this problem..please help me (1 Reply)
Discussion started by: srinivas2828
1 Replies

4. Solaris

x86 Solaris 10 nic driver added but not attached. NIC is not detected.

I couldn't install my nic in solaris 10. I compiled and added the driver but failed to attach the driver and ifconfig output shows only loopback dev. Please see the following output and tell me whether my nic has been detected and why the driver failed to attach? My nic is detected in linux... (0 Replies)
Discussion started by: vectrum
0 Replies

5. Solaris

Changing the subnet mask on solaris 10

Hello, can anyone help me with the command to change the subnet mask on solaris 10? The mask is currently 255.255.255.255 I will like to change it to 255.255.2555.0. Thank you (5 Replies)
Discussion started by: cjashu
5 Replies

6. Solaris

Solaris 2nd nic for different subnet

posted this on the other sub-forum https://www.unix.com/unix-for-dummies-questions-and-answers/246504-solaris-11-2nd-nic-different-subnet.html apologies if linking is not appropriate Thanks for your help. (0 Replies)
Discussion started by: ad101
0 Replies

7. Linux

Add two different subnet public IPs to single NIC or two different NIC on same box

Hello Admins, My ask is how can I add two different subnet IPs to same box with two different gateways? The issue is I can connect to the box when I am on ethernet LAN, but I am not able to connect to the same IP when I am on wifi. The server is RHEL 7 VM on vmware. How can I get connected... (4 Replies)
Discussion started by: snchaudhari2
4 Replies

8. UNIX for Advanced & Expert Users

Changing single path NIC to a teamed connection in same subnet

Dear all, I have a remote CentOS7 server that has two network cards. Each card has four ports and port one of card one was defined with the IP address assigned to the server. So far, so good and it's been working for over a year. We have now got cables sorted out so there are four paths... (4 Replies)
Discussion started by: rbatte1
4 Replies
netmasks(4)                                                        File Formats                                                        netmasks(4)

NAME
netmasks - network mask database SYNOPSIS
/etc/inet/netmasks /etc/netmasks DESCRIPTION
The netmasks file contains network masks used to implement IP subnetting. It supports both standard subnetting as specified in RFC-950 and variable length subnetting as specified in RFC-1519. When using standard subnetting there should be a single line for each network that is subnetted in this file with the network number, any number of SPACE or TAB characters, and the network mask to use on that network. Network numbers and masks may be specified in the conventional IP `.' (dot) notation (like IP host addresses, but with zeroes for the host part). For example, 128.32.0.0 255.255.255.0 can be used to specify that the Class B network 128.32.0.0 should have eight bits of subnet field and eight bits of host field, in addition to the standard sixteen bits in the network field. When using variable length subnetting, the format is identical. However, there should be a line for each subnet with the first field being the subnet and the second field being the netmask that applies to that subnet. The users of the database, such as ifconfig(1M), perform a lookup to find the longest possible matching mask. It is possible to combine the RFC-950 and RFC-1519 form of subnet masks in the net- masks file. For example, 128.32.0.0 255.255.255.0 128.32.27.0 255.255.255.240 128.32.27.16 255.255.255.240 128.32.27.32 255.255.255.240 128.32.27.48 255.255.255.240 128.32.27.64 255.255.255.240 128.32.27.80 255.255.255.240 128.32.27.96 255.255.255.240 128.32.27.112 255.255.255.240 128.32.27.128 255.255.255.240 128.32.27.144 255.255.255.240 128.32.27.160 255.255.255.240 128.32.27.176 255.255.255.240 128.32.27.192 255.255.255.240 128.32.27.208 255.255.255.240 128.32.27.224 255.255.255.240 128.32.27.240 255.255.255.240 128.32.64.0 255.255.255.192 can be used to specify different netmasks in different parts of the 128.32.0.0 Class B network number. Addresses 128.32.27.0 through 128.32.27.255 have a subnet mask with 28 bits in the combined network and subnet fields (often referred to as the subnet field) and 4 bits in the host field. Furthermore, addresses 128.32.64.0 through 128.32.64.63 have a 26 bits in the subnet field. Finally, all other addresses in the range 128.32.0.0 through 128.32.255.255 have a 24 bit subnet field. Invalid entries are ignored. SEE ALSO
ifconfig(1M), inet(7P) Postel, Jon, and Mogul, Jeff, Internet Standard Subnetting Procedure, RFC 950, Network Information Center, SRI International, Menlo Park, Calif., August 1985. V. Fuller, T. Li, J. Yu, K. Varadhan, Classless Inter-Domain Routing (CIDR): an Address Assignment and Aggregation Strategy, RFC 1519, Network Information Center, SRI International, Menlo Park, Calif., September 1993. T. Pummill, B. Manning, Variable Length Subnet Table For IPv4, RFC 1878, Network Information Center, SRI International, Menlo Park, Calif., December 1995. NOTES
/etc/inet/netmasks is the official SVr4 name of the netmasks file. The symbolic link /etc/netmasks exists for BSD compatibility. SunOS 5.10 7 Jan 1997 netmasks(4)
All times are GMT -4. The time now is 10:42 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy