04-17-2014
Jumpstart woes
Hey,
I have been battling with jumpstart for the past few days. Interface nxge0 is set on a vlan:
nxge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 0.0.0.0 netmask ff000000
ether 0:21:28:3c:a0:6
nxge998000: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 7
inet 63.69.69.80 netmask ffffff00 broadcast 63.69.69.255
ether 0:21:28:3c:a0:6
nxge999000: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 6
inet 192.168.255.39 netmask ffffff00 broadcast 192.168.255.255
ether 0:21:28:3c:a0:6
Jumpstarting over nxge999000 works fine. When I try over nxge998000 I get:
{0} ok boot net:63.69.69.80 -v - install
T5140, No Keyboard
Copyright (c) 1998, 2012, Oracle and/or its affiliates. All rights reserved.
OpenBoot 4.33.6, 65312 MB memory available, Serial #93283168.
Ethernet address 0:21:28:8f:63:60, Host ID: 858f6360.
Boot device: /pci@500/pci@0/pci@8/network@0:63.69.69.80 File and args: -v - install
/pci@500/pci@0/pci@8/network@0: 1000 Mbps full duplex link up
Requesting Internet Address for 0:21:28:8f:63:60
Requesting Internet Address for 0:21:28:8f:63:60
Requesting Internet Address for 0:21:28:8f:63:60
Requesting Internet Address for 0:21:28:8f:63:60
Requesting Internet Address for 0:21:28:8f:63:60
Requesting Internet Address for 0:21:28:8f:63:60
/pci@500/pci@0/pci@8/network@0: 1000 Mbps full duplex link up
Using RARP/BOOTPARAMS...
Requesting Internet address for 0:21:28:8f:63:60
Internet address is: 63.69.69.194
panic - boot: Could not mount filesystem.
Program terminated
{0} ok
One the jumpstart server I am seeing quite a bit of activity. tftp seems to work but when it hands off to RPC everything goes bad:
ndcpzs37-998 -> ndctzs08 TFTP Data block 430 (512 bytes)
ndctzs08 -> ndcpzs37-998 TFTP Ack block 430
ndcpzs37-998 -> ndctzs08 TFTP Data block 431 (512 bytes)
ndctzs08 -> ndcpzs37-998 TFTP Ack block 431
ndcpzs37-998 -> ndctzs08 TFTP Data block 432 (168 bytes) (last block)
ndctzs08 -> ndcpzs37-998 TFTP Ack block 432
ndctzs08 -> BROADCAST BIFF R port=111
ndcpzs37-998 -> ndctzs08 BIFF C port=32832
I have tried rpcinfo from the client and it returns:
rpcinfo -u 63.69.69.80 nfs
program 100003 version 2 ready and waiting
program 100003 version 3 ready and waiting
showmount -e 63.69.69.80
export list for 63.69.69.80:
/export (everyone)
/export/home (everyone)
Not sure what else to try.
Any advice would be great.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Have a Sun CDROM connected to a Ultra machine .
Problem is it is not recognizing the drive being connected to it ...
When i put the CD in the drive it accepts the CD and zooms initially then quitens out ..
The devices drivers are also not created for it ...
Any ideas anyone ... I am... (4 Replies)
Discussion started by: Jai
4 Replies
2. UNIX for Advanced & Expert Users
Hi there,
My first post here. Currently, i have been experiencing this error quite frequently on a ultra5 com. Things i have done is changing a new hdd and mem modules but i still encounter this error. Some messages from the var/adm
WARNING: uncorrectable error from pci0 (upa mid 0) during... (0 Replies)
Discussion started by: kerwen
0 Replies
3. Solaris
Good Day,
I've remotely mounted a cdrom (no problems theere). The kicker is I can see the directories on the remote CD bout I can't see the files. What am I doing wrong? I'm logged in as root on both systems. All the permissions seem okay - what am I missing? Thanks (2 Replies)
Discussion started by: greg69
2 Replies
4. Solaris
Hi All
I have a Solaris 10 jumpstart boot/config server set up on a subnet, and am trying to use it to build a client (the only other machine on the network). Things start out just fine, with the client booting into the Solaris Installation program, but then it just coredumps just as it's... (4 Replies)
Discussion started by: rickedwards44
4 Replies
5. Solaris
Morning all,
I am attempting to load a package from a Solaris 8 CDROM.
This fails with the error :
"pkgadd: ERROR: unable to access pkgmap file </cdrom/ .........../SUNWlibC/pkgmap>
No changes were made to the system"
Any help would be appreciated
Andy (6 Replies)
Discussion started by: AndyD
6 Replies
6. Solaris
version of solaris: SunOS 5.8 Generic-117350-39 sun4u sparc SUNW,Netra-240
version of SSH: OpenSSH_4.4p1, OpenSSL 0.9.8d 28 Sep 2006
Task:
I need to have another Machine ssh into my machine, by either RSA authentication or username/pass authentication.
History:
In the begining my... (4 Replies)
Discussion started by: EWTGPAC
4 Replies
7. Solaris
Greetings Forumers!
I've been fighting a locale problem on a v490 running Solaris 10 u4 (8/07). When I login to the system, I get several "locale" error messages:
user1's password:
Last login: Wed May 26 2010 09:14:13 -0400 from system1
You have mail.
couldn't set locale correctly
couldn't... (0 Replies)
Discussion started by: bluescreen
0 Replies
8. Web Development
We recently upgraded mysql from 4.0 to 5.0 and the following code is throwing (via DB.php) a "Database Error: Unknown" error. I can say with certainty that my connection parameters are correct and functional. It's been so long since I've done any mysql, I'm hoping someone can look at the code and... (0 Replies)
Discussion started by: tiggyboo
0 Replies
9. IP Networking
I'm looking for recommendations for a general problem.
Apparently (that is according to my boss and coworkers) I am responsible for guaranteeing quality of service to our remote MySQL server during the course of the day. They may run a complete database restore for any number of reasons and are... (1 Reply)
Discussion started by: Astrocloud
1 Replies
10. AIX
Hi all
With the recent virus attacks we have been tasked with upgrading Samba to a "secure" version. Currently running 3.0.29a and looking to put the latest version down 4.6.5.
Being a lazy bod I have only ever installed this, a long time ago, when you could get it in BFF filesets. Have... (6 Replies)
Discussion started by: splattty
6 Replies
LEARN ABOUT FREEBSD
ntb_hw
NTB(4) BSD Kernel Interfaces Manual NTB(4)
NAME
ntb, ntb_hw, if_ntb -- Intel(R) Non-Transparent Bridge driver
SYNOPSIS
To compile this driver into your kernel, place the following lines in your kernel configuration file:
device ntb_hw
device if_ntb
Or, to load the driver as a module at boot, place the following line in loader.conf(5):
if_ntb_load="YES"
DESCRIPTION
The ntb driver provides support for the Non-Transparent Bridge (NTB) in the Intel S1200, Xeon E3 and Xeon E5 processor families.
The NTB allows you to connect two computer systems using a PCI-e link if they have the correct equipment and connectors.
CONFIGURATION
The NTB memory windows need to be configured by the BIOS. If your BIOS allows you to set their size, you should set the size of both memory
windows to 1 MiB. This needs to be done on both systems.
Each system needs to have a different IP address assigned. The MAC address is randomly generated. Also for maximum performance, the MTU
should be set to 16 kiB. This can be done by adding the line below to rc.conf(5):
ifconfig_ntb0="inet 192.168.1.10 netmask 255.255.255.0 mtu 16384"
And on the second system :
ifconfig_ntb0="inet 192.168.1.11 netmask 255.255.255.0 mtu 16384"
If you are using the UDP protocol, you may want to increase the net.inet.udp.maxdgram sysctl(8) variable.
SEE ALSO
rc.conf(5), sysctl(8)
AUTHORS
The ntb driver was developed by Intel and originally written by Carl Delsey <carl@FreeBSD.org>.
BUGS
If the driver is unloaded, it cannot be reloaded without a system reboot.
The network support is limited. It isn't fully configurable yet. It also isn't integrated into netgraph(4) or bpf(4).
NTB to Root Port mode is not yet supported.
There is no way to protect your system from malicious behavior on the other system once the link is brought up. Anyone with root or kernel
access on the other system can read or write to any location on your system. In other words, only connect two systems that completely trust
each other.
BSD
Apr 11, 2013 BSD