But, wouldn't that mean I'll have to keep my desktop on to have internet on Laptop?
I'm posting more details which might help you. Here are some commands which i ran and their results
Please note here that I have also tried using network manager (added in slackware 14.1) without success. The commands i ran for networkmanager are:
Also, I tried using wicd with similar issue. And, I could not find a way to clone MAC on wicd GUI.
What i think is that if Hathway had not restricted the connection to one pc (i.e., by storing MAC address and giving connection to that PC only), slackware would connect without any problems. But because I have to change my laptop's MAC address to match my other computer's, maybe slackware isn't reading it correctly (i.e., it's trying to connect by default MAC), whereas Puppy Linux did.
I running HPUX 11.0,
Netscape gives me an error "Unable to locate Server" when using a www.something.com address.
If I use an IP address I get past the router and onto the Internet.
My workstation can get to the Router @ 192.168.0.1 and also it's local APACHE server.
I have DHCP enabled... (8 Replies)
I tried unsuccessfully to set up the internet on slackware . I ran
"netconfig" and follow all the steps like to enter ip address dns server subnet mask and default gateway . I saved the configuration and reboot the computer with no results . When im doing this under my pc works fine but first... (4 Replies)
HI,
Am using GPRS ( MOB # 3230 ) internet connection in windows
Hw to use internet r connect in linux.. ( Red Hat Linux Ver.10 )
Please help me..
Thanks in adv.. (1 Reply)
Hi,
Iam using BSNL broad band connection and i have installed two OS Xp & Sun solaris -x86 on my machine.Iam able to use INTERNET on windows Xp but not able to do it on solaris x86.
I have tried using DHCP concept as well as sys-unconfig command in solaris but no results.
When i use... (5 Replies)
Hi friends
recently i have installed SXDE 1/08 into my machine,and i installed wifi driver also
its working fine,Recently i was unable to connect to Internet,I have not changed any configurations and any installations,thing is that i got my iwk0 interface is UP and IP address also and i can... (6 Replies)
Hi Gurus,
Good morning .
I have a railwire internet connection(dial up).I am able to access internet in windows xp .but in windows xp every time i restart my pc i have to manually right click the "railwire"icon and then click "connect, after this i am just getting connected to the internet. But... (4 Replies)
I have installed Oracle VM virtual box on Windows 7 and using LINUX (backtrack 5) as my virtual OS. The problem is i'm unable to connect to internet from my virtual OS. i'm using USB dongle (mobile broad band) to connect to internet from my host OS windows 7.
I tried setting NAT in VM settings... (0 Replies)
Hello,
I just installed CentOS 7 (Server with GUI) and guess what I could install Virtual Box Guest additions without installing any extra package/software which is great news !
Now bad news or not so great news.
My Host OS is Windows 10, Virtual Box is the virtualization software. CentOS7-1... (0 Replies)
Hello, I installed FreeBSD 10.3 on AQEMU. I can't connect to internet in none
of the modes of "Default, User-Mode Networking" and "TUN/TAP Networking".
I am able to ping my host in the TAP networking mode (192.168.1.33 which is my
IP addr in guest), but getting 'no route to host' for any... (1 Reply)
Discussion started by: temp-usr
1 Replies
LEARN ABOUT DEBIAN
ifscheme
IFSCHEME(8) Commands IFSCHEME(8)NAME
ifscheme - scheme control for network interfaces
SYNOPSIS
ifscheme [-v] [[-s] newscheme]
mapping <interface> script ifscheme-mapping
DESCRIPTION
ifscheme allows you to change network configuraton schemes or query the current scheme. It integrates with the ifup(8) command and inter-
faces(5). For example, you might use this program to configure a "home" scheme and a "work" scheme for a network device on a laptop. When
you move between home and work, a simple command can reconfigure your networking.
If you run the program with no parameters, it will tell what the current network scheme is.
The ifscheme-mapping utility is used to tell the ifup and ifdown utilities about the current scheme.
OPTIONS -v
--verbose
Run in verbose mode. This is passed in to the ifup and ifdown programs as well.
-l
--list list all schemes available/defined in /etc/network/interfaces.
newscheme
-s newscheme
--scheme newscheme
Change to a new network configuration scheme. When the scheme is changed, network interfaces that were using the old scheme will be
taken down and brought back up to use the new configuration scheme. -s or --scheme are mandatory if newscheme begins with a -.
CONFIGURATION
To make the program do anything useful when a scheme is selected, you must edit /etc/network/interfaces to add a mapping for the interface
(or interfaces) that can be controlled on a per-scheme basis. Suppose you want to control eth0 in this way. You might have an existing eth0
configuraton in there, such as:
auto eth0
iface eth0 inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.1
To change this so you can chose between static routing and dhcp, replace it with the following (it helps to ifdown the interface first).
auto eth0
mapping eth0
script ifscheme-mapping
iface eth0-home inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.1
iface eth0-work inet dhcp
Now if you run "ifscheme home" and ifup the interface, you'll get the eth0-home configuration stanza. If you run "ifscheme work", it will
be changed to the eth0-work stanza. You can add additional stanzas as desired, but the label must always be of the form <hardware inter-
face>-<scheme name>.
If you have a second interface (perhaps a wireless network card on eth1), you can duplicate the above for that interface, changing the eth0
and the configuration details as appropriate, but remember to add an iface stanza for every scheme name for the second interface.
FILES
/etc/network/interfaces
the interfaces definition file
/etc/network/run/scheme
the current scheme
/etc/network/run/ifstate
a record of the current state of the interfaces, managed by ifup and ifdown
BUGS
All schemed interfaces will have the same scheme.
Any schemed interface which does not have an entry for the current scheme and is not configured when the scheme is changed will not be suc-
cessfully configured when it is brought up.
SEE ALSO interfaces(5)ifup(8)ifdown(8)DISTRIBUTION
Redistribution is subject to the GNU public license.
AUTHORS
Joey Hess <joey@kitenet.net>, Peter Wilson <pwilson@cs.hmc.edu>
IFSCHEME(8)