Sponsored Content
Operating Systems AIX Problem in increasing filesystem Post 302897843 by ibmtech on Wednesday 16th of April 2014 11:08:24 AM
Old 04-16-2014
1st thing, the error is saying you have no free PPs, so don't go for 256GB extention directly, if you have not observe the available free PPs on VG is 1023 (as one PP is taken by VG).

Just go with 250GB or 255GB expansion instead of 256GB
chfs -a size=+255G /<filesystem name>

As you mentioned you have checked the Max LPs for the LV of that filesystem. But, considering you want to go to 512 GB, you need alteast 2048 LPs on that LV
PP size is 256 mb, so 1gb will have 4 PPs,1024/256=4, then 512(gb)*4=2048(LPs)
Verify that by issuing lslv <lv name> | grep "MAX LPs"

You don't have to reboot the system.
If on the new disk you are expanding this filesystem then, you can easily remove the disk from VG, by issuing reducevg command.
You can issue a command lspv -l hdiskX to list the LV residing on that PV.

Hope this helps.
These 2 Users Gave Thanks to ibmtech For This Post:
 

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Increasing filesystem space

Now, i know a ufs file system can be increased using mkfs but hwo do I take space from a file system and add it to another file system? at my job here, that seems to be possible because I see request on it almost every day. what is the exact command to do this and does the system need to be... (1 Reply)
Discussion started by: TRUEST
1 Replies

2. AIX

Increasing the FileSystem Size

Hi Everybody, I have AIX 4.3 and I have a FileSystem with 400GB size, which called /db/run. Because of grow up of the application's data, more storage has been added 200GB. To add this space without affecting the application & the application's requirements, I have to add this 200GB to the existed... (9 Replies)
Discussion started by: aldowsary
9 Replies

3. Solaris

need help Filesystem Problem

hi expert, please help have a problem with my new Sun Solaris server V890 after power on and booted into the os i had get this error messages below : * no command can use except "cd" Boot device: root-disk File and args: SunOS Release 5.8 Version Generic_117350-34 64-bit Copyright... (7 Replies)
Discussion started by: bucci
7 Replies

4. AIX

Does HACMP have bugs increasing filesystem or Logical volumes

Hello, Does HACMP have bugs ? I have version 5.4 on AIX 6.1 and when I try to increase filesystem space or logical volume partitions which are under HACMP VG it gives me error: # lsvg rootvg pr0oravg px0oravg pb0oravg pr0sapvg px0sapvg pb0sapvg pr1_pr2_vg pr2_px1_vg # #... (11 Replies)
Discussion started by: filosophizer
11 Replies

5. AIX

Increasing ./usr or any filesystem

Hi guys, I want to increase my ./usr or just one path in my aix6.1 machine. currently if I # lsvg rootvg VOLUME GROUP: rootvg VG IDENTIFIER: 00f6126500004c00000 0012aef0c9035 VG STATE: active PP SIZE: 128... (2 Replies)
Discussion started by: pilotHans
2 Replies

6. UNIX for Dummies Questions & Answers

hwo to find shared filesystem and local filesystem in AIX

Hi, I wanted to find out that in my database server which filesystems are shared storage and which filesystems are local. Like when I use df -k, it shows "filesystem" and "mounted on" but I want to know which one is shared and which one is local. Please tell me the commands which I can run... (2 Replies)
Discussion started by: kamranjalal
2 Replies

7. Solaris

Problem mounting iscsi filesystem

Hi, I have a strange problem with iscsi. My vfstab entry looks like this: /dev/md/dsk/d100 /dev/md/rdsk/d100 /zones/ssapp0895v01 ufs 2 iscsi - After rebooting, the filesystem gets mounted with the option "nosetuid". I believe the default should be "suid" /zones/ssapp0895v01 on... (0 Replies)
Discussion started by: alvaro66
0 Replies

8. AIX

Mount Filesystem in AIX Unable to read /etc/filesystem

Dear all, We are facing prolem when we are going to mount AIX filesystem, the system returned the following error 0506-307The AFopen call failed : A file or directory in the path name does not exist. But when we ls filesystems in the /etc/ directory it show -rw-r--r-- 0 root ... (2 Replies)
Discussion started by: m_raheelahmed
2 Replies

9. AIX

Problem with filesystem created after HACMP was shut down

There is a shared volume group connected to two AIX systems A and B on a shared storage. The shared volume group was regularly attached to the system A and in case of a system A crash, the system B should take over the shared volume group and resources on it. Resources on the shared storage:... (1 Reply)
Discussion started by: yamanu
1 Replies

10. Hardware

Increasing the filesystem size

Hi Guys We have a VM machine, now I want to increase the size of the filesystem. We are running RHEL6 O/S. I have filesystem that is 500GB I want to increase that filesystem to 1.5 TB. The guy who manages the VM increased the size on the VM machine, now how do I make sure that the... (7 Replies)
Discussion started by: Phuti
7 Replies
mlib_ImageColorRGB2YCC_Fp(3MLIB)			    mediaLib Library Functions				  mlib_ImageColorRGB2YCC_Fp(3MLIB)

NAME
mlib_ImageColorRGB2YCC_Fp - RGB to YCC color conversion SYNOPSIS
cc [ flag... ] file... -lmlib [ library... ] #include <mlib.h> mlib_status mlib_ImageColorRGB2YCC_Fp(mlib_image *dst, const mlib_image *src); DESCRIPTION
The mlib_ImageColorRGB2YCC_Fp() function performs a color space conversion from computer R'G'B' to ITU-R Rec.601 Y'CbCr. The source and destination images must be three-channel images. It uses the following equation: |Y'| |cmat[0] cmat[1] cmat[2]| |R'| |offset[0]| |Cb| = |cmat[3] cmat[4] cmat[5]| * |G'| + |offset[1]| |Cr| |cmat[6] cmat[7] cmat[8]| |B'| |offset[2]| where cmat[] = { 65.738/256, 129.057/256, 25.064/256, -37.945/256, -74.494/256, 112.439/256, 112.439/256, -94.154/256, -18.285/256 }; offset[] = { 16, 128, 128 }; src[x][y] = { R', G', B' }; dst[x][y] = { Y', Cb, Cr }; PARAMETERS
The function takes the following arguments: dst Pointer to destination image. src Pointer to source image. RETURN VALUES
The function returns MLIB_SUCCESS if successful. Otherwise it returns MLIB_FAILURE. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Interface Stability |Evolving | +-----------------------------+-----------------------------+ |MT-Level |MT-Safe | +-----------------------------+-----------------------------+ SEE ALSO
mlib_ImageColorConvert2(3MLIB), mlib_ImageColorConvert2_Fp(3MLIB), mlib_ImageColorRGB2YCC(3MLIB), mlib_ImageColorXYZ2RGB(3MLIB), mlib_ImageColorXYZ2RGB_Fp(3MLIB), mlib_ImageColorYCC2RGB(3MLIB), mlib_ImageColorYCC2RGB_Fp(3MLIB), attributes(5) SunOS 5.10 10 Nov 2004 mlib_ImageColorRGB2YCC_Fp(3MLIB)
All times are GMT -4. The time now is 05:22 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy