XPT(4)							   BSD Kernel Interfaces Manual 						    XPT(4)

NAME

     xpt -- CAM transport layer interface

SYNOPSIS

     None.

DESCRIPTION

     The xpt driver provides a way for userland applications to issue certain CAM CCBs to the kernel.

     Since the xpt driver allows direct access to the CAM subsystem, system administrators should exercise caution when granting access to this
     driver.  If used improperly, this driver can allow userland applications to crash a machine or cause data loss.

KERNEL CONFIGURATION

     There is no kernel configuration required for the xpt driver.  It is enabled when SCSI support is enabled in the kernel.  There is one
     instance of the xpt driver per CAM transport layer instance.  Since there is currently only one CAM transport layer, there will only be one
     instance of this driver.

IOCTLS

     CAMIOCOMMAND    This ioctl takes certain kinds of CAM CCBs and passes them through to the CAM transport layer for action.	Only the following
		     CCB types are supported:

		     XPT_SCAN_BUS
		     XPT_RESET_BUS
		     XPT_SCAN_LUN
		     XPT_ENG_INQ
		     XPT_ENG_EXEC
		     XPT_DEBUG
		     XPT_DEV_MATCH
		     XPT_PATH_INQ

		     The above CCBs are the only ones supported since it makes more sense to send them through a generic passthrough device rather
		     than a passthrough device tied to a particular underlying SCSI device.

     CAMGETPASSTHRU  This ioctl takes an XPT_GDEVLIST CCB, and returns the passthrough device corresponding to the device in question.

FILES

     /dev/xpt0	Character device node for the xpt driver.

DIAGNOSTICS

     None.

SEE ALSO

     cam(3), cam_cdbparse(3), pass(4), camcontrol(8)

HISTORY

     The CAM transport layer driver first appeared in FreeBSD 3.0.

AUTHORS

     Kenneth Merry <ken@FreeBSD.org>

BSD
								 October 10, 1998							       BSD