03-14-2014
Ok so you are doing open network connection,
I rather say use private IP between HMC and Manage system (ie.e use DHCP)
In the HMC go to HMC management --> change network settings --> LAN Adapter (Mostly people use eth0 for private IP, I don't know how you configured)--> Details --> (Select Private) - Autodetection -- DHCMP Server (enable) -- OK.
Do the connectivity test.
Also, if your HMC and VIOS are NOT on same VLAN you don't even have to worry about changing the IP of HMC, you use public IP to get into HMC.
Also, make sure to ask if network is tagged, if so you have to change the PVID as per the new subnet.
If you there is No VLAN Tagging then the setup is as you have now.
Hope this helps.
10 More Discussions You Might Find Interesting
1. AIX
Hello guys,
It would be so nice of you if someone can provide me with these informations.
1) My SAN group assigned 51G of LUN space to the VIO server.I ran cfgdev to discover the newly added LUN. Unfortunately most of the disks that are in VIO server is 51G. How would I know which is the newly... (3 Replies)
Discussion started by: solaix14
3 Replies
2. AIX
I created a profile in HMC for a new LPAR and activated it but not yet installed AIX.
Is there a step to make this new LPAR available as vhostX from the VIO server after creating and activating an HMC profile?
I already shared the CD-ROM device from the HMC profile.
Thanks.
-... (1 Reply)
Discussion started by: learner1
1 Replies
3. AIX
Hello,
I have created mapping of 2 virtual adapters for Lpars using following command:
mkvdev -vdev ipanalyzerlv1 -vadapter vhost11
mkvdev -vdev ipanalyzerlv -vadapter vhost13
The above two commands were succesfull
but when I want to map the third virtual device to the same Lpar than... (3 Replies)
Discussion started by: Vit0_Corleone
3 Replies
4. AIX
Hi All,
Besides the licenses on VIO and LPAR. What's the main difference with the two? I have installed VIO, my manager told me so, because it's like a free hypervisor but I never installed LPAR before. How do you install it? And if you can give more info on the two, that would be great.
... (5 Replies)
Discussion started by: itik
5 Replies
5. AIX
Hi All,
i would like to know if it's possible to know all the IP Addresses of all LPAR's interfaces from HMC (without connect into LPAR).
And if i can know also the "Application" hostname of LPAR from HMC.
Thanks in advance.
Bye
Mario (2 Replies)
Discussion started by: Zio Bill
2 Replies
6. AIX
Hi guys,
does anyone know how to get a list of the LPAR running on VIOS?
Thanks! (5 Replies)
Discussion started by: cecco16
5 Replies
7. AIX
I am trying to install AIX 5.3 on one of the LPARs through VIOS but I get this error 0518
Reference Code Selection
0518 (Time stamp: 12/18/12 12:10:20 AM UTC)
Starting kernel (Time stamp: 12/18/12 12:10:15 AM UTC)
AIX is starting. (Time stamp: 12/18/12 12:10:15 AM... (10 Replies)
Discussion started by: filosophizer
10 Replies
8. AIX
Does anyone know of a command that can be run on the lpar to show the name of the lpars managing HMC?
We have a large environment and records a little old on which HMC manages which lpars....if i could login to an lpar and just issue a command to show me its managing hmc that would be great. (2 Replies)
Discussion started by: Foiled
2 Replies
9. UNIX for Beginners Questions & Answers
We want to integrate powervm by using openstack with hmc.
Now we encounter problem with the console, we can open the terminal within hmc, and I think hmc using tech java applet.
sample applet code like
<applet codebase="https://172.16.28.174/hmc/"... (0 Replies)
Discussion started by: eagle
0 Replies
10. AIX
hello
P6 was managed by HMC, tried to install on it VIOS 2.2.6
and got this error message
Hosting requires a hosting partition -- boot not permitted
vios-4 - imgbb.com
then after creating an lpar in HMC got this message
B2001230
vios-3 - imgbb.com
anyone know how to solve this... (3 Replies)
Discussion started by: filosophizer
3 Replies
LEARN ABOUT DEBIAN
ifscheme-mapping
IFSCHEME(8) Commands IFSCHEME(8)
NAME
ifscheme - scheme control for network interfaces
SYNOPSIS
ifscheme [-v] [[-s] newscheme]
mapping <interface> script ifscheme-mapping
DESCRIPTION
ifscheme allows you to change network configuraton schemes or query the current scheme. It integrates with the ifup(8) command and inter-
faces(5). For example, you might use this program to configure a "home" scheme and a "work" scheme for a network device on a laptop. When
you move between home and work, a simple command can reconfigure your networking.
If you run the program with no parameters, it will tell what the current network scheme is.
The ifscheme-mapping utility is used to tell the ifup and ifdown utilities about the current scheme.
OPTIONS
-v
--verbose
Run in verbose mode. This is passed in to the ifup and ifdown programs as well.
-l
--list list all schemes available/defined in /etc/network/interfaces.
newscheme
-s newscheme
--scheme newscheme
Change to a new network configuration scheme. When the scheme is changed, network interfaces that were using the old scheme will be
taken down and brought back up to use the new configuration scheme. -s or --scheme are mandatory if newscheme begins with a -.
CONFIGURATION
To make the program do anything useful when a scheme is selected, you must edit /etc/network/interfaces to add a mapping for the interface
(or interfaces) that can be controlled on a per-scheme basis. Suppose you want to control eth0 in this way. You might have an existing eth0
configuraton in there, such as:
auto eth0
iface eth0 inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.1
To change this so you can chose between static routing and dhcp, replace it with the following (it helps to ifdown the interface first).
auto eth0
mapping eth0
script ifscheme-mapping
iface eth0-home inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.1
iface eth0-work inet dhcp
Now if you run "ifscheme home" and ifup the interface, you'll get the eth0-home configuration stanza. If you run "ifscheme work", it will
be changed to the eth0-work stanza. You can add additional stanzas as desired, but the label must always be of the form <hardware inter-
face>-<scheme name>.
If you have a second interface (perhaps a wireless network card on eth1), you can duplicate the above for that interface, changing the eth0
and the configuration details as appropriate, but remember to add an iface stanza for every scheme name for the second interface.
FILES
/etc/network/interfaces
the interfaces definition file
/etc/network/run/scheme
the current scheme
/etc/network/run/ifstate
a record of the current state of the interfaces, managed by ifup and ifdown
BUGS
All schemed interfaces will have the same scheme.
Any schemed interface which does not have an entry for the current scheme and is not configured when the scheme is changed will not be suc-
cessfully configured when it is brought up.
SEE ALSO
interfaces(5) ifup(8) ifdown(8)
DISTRIBUTION
Redistribution is subject to the GNU public license.
AUTHORS
Joey Hess <joey@kitenet.net>, Peter Wilson <pwilson@cs.hmc.edu>
IFSCHEME(8)