HMC and FSP are directly connected.:
remove emty space between w w w
-FSP (HMC1 - search for 8202-E4C on the same page)
I think HMC port on FSP has fixed IP address.
What puzzles me is that I thought that by established direct HMC to FSP connection your console access to VIOS and LPAR's is guaranteed. What I really did is just switched management port for HMC (eth1 on mentioned page) to new subnet.
So conclusion is that HMC management port ip address has to be on the same subnet as VIOS and LPAR(s) or maybe I need to adjust route settings...
There must be some info of having HMC management port on different subnet but I could not find it yet.
Also if anybody knows how can I check if SEA was set with IP address?
Hello guys,
It would be so nice of you if someone can provide me with these informations.
1) My SAN group assigned 51G of LUN space to the VIO server.I ran cfgdev to discover the newly added LUN. Unfortunately most of the disks that are in VIO server is 51G. How would I know which is the newly... (3 Replies)
I created a profile in HMC for a new LPAR and activated it but not yet installed AIX.
Is there a step to make this new LPAR available as vhostX from the VIO server after creating and activating an HMC profile?
I already shared the CD-ROM device from the HMC profile.
Thanks.
-... (1 Reply)
Hello,
I have created mapping of 2 virtual adapters for Lpars using following command:
mkvdev -vdev ipanalyzerlv1 -vadapter vhost11
mkvdev -vdev ipanalyzerlv -vadapter vhost13
The above two commands were succesfull
but when I want to map the third virtual device to the same Lpar than... (3 Replies)
Hi All,
Besides the licenses on VIO and LPAR. What's the main difference with the two? I have installed VIO, my manager told me so, because it's like a free hypervisor but I never installed LPAR before. How do you install it? And if you can give more info on the two, that would be great.
... (5 Replies)
Hi All,
i would like to know if it's possible to know all the IP Addresses of all LPAR's interfaces from HMC (without connect into LPAR).
And if i can know also the "Application" hostname of LPAR from HMC.
Thanks in advance.
Bye
Mario (2 Replies)
I am trying to install AIX 5.3 on one of the LPARs through VIOS but I get this error 0518
Reference Code Selection
0518 (Time stamp: 12/18/12 12:10:20 AM UTC)
Starting kernel (Time stamp: 12/18/12 12:10:15 AM UTC)
AIX is starting. (Time stamp: 12/18/12 12:10:15 AM... (10 Replies)
Does anyone know of a command that can be run on the lpar to show the name of the lpars managing HMC?
We have a large environment and records a little old on which HMC manages which lpars....if i could login to an lpar and just issue a command to show me its managing hmc that would be great. (2 Replies)
We want to integrate powervm by using openstack with hmc.
Now we encounter problem with the console, we can open the terminal within hmc, and I think hmc using tech java applet.
sample applet code like
<applet codebase="https://172.16.28.174/hmc/"... (0 Replies)
hello
P6 was managed by HMC, tried to install on it VIOS 2.2.6
and got this error message
Hosting requires a hosting partition -- boot not permitted
vios-4 - imgbb.com
then after creating an lpar in HMC got this message
B2001230
vios-3 - imgbb.com
anyone know how to solve this... (3 Replies)
Discussion started by: filosophizer
3 Replies
LEARN ABOUT DEBIAN
ipsec_samesaid
IPSEC_SAMEADDR(3) Library Functions Manual IPSEC_SAMEADDR(3)NAME
ipsec_sameaddr, ipsec_addrcmp, ipsec_samesubnet, ipsec_addrinsubnet, ipsec_subnetinsubnet, ipsec_subnetishost, ipsec_samesaid,
ipsec_sameaddrtype, ipsec_samesubnettype - do comparisons for addresses, subnets, SA IDs and address families
SYNOPSIS
#include <freeswan.h>
int sameaddr(const ip_address *a, const ip_address *b);
int addrcmp(const ip_address *a, const ip_address *b);
int samesubnet(const ip_subnet *a, const ip_subnet *b);
int addrinsubnet(const ip_address *a, const ip_subnet *s);
int subnetinsubnet(const ip_subnet *a, const ip_subnet *b);
int subnetishost(const ip_subnet *s);
int samesaid(const ip_said *a, const ip_said *b);
int sameaddrtype(const ip_address *a, const ip_address *b);
int samesubnettype(const ip_subnet *a, const ip_subnet *b);
DESCRIPTION
These functions do various comparisons and tests on the ip_address type and ip_subnet types.
Sameaddr returns non-zero if addresses a and b are identical, and 0 otherwise. Addresses of different families are never identical.
Addrcmp returns -1, 0, or 1 respectively if address a is less than, equal to, or greater than b. If they are not of the same address fam-
ily, they are never equal; the ordering reported in this case is arbitrary (and probably not useful) but consistent.
Samesubnet returns non-zero if subnets a and b are identical, and 0 otherwise. Subnets of different address families are never identical.
Addrinsubnet returns non-zero if address a is within subnet s and 0 otherwise. An address is never within a subnet of a different address
family.
Subnetinsubnet returns non-zero if subnet a is a subset of subnet b and 0 otherwise. A subnet is deemed to be a subset of itself. A sub-
net is never a subset of another subnet if their address families differ.
Subnetishost returns non-zero if subnet s is in fact only a single host, and 0 otherwise.
Samesaid returns non-zero if SA IDs a and b are identical, and 0 otherwise.
Sameaddrtype returns non-zero if addresses a and b are of the same address family, and 0 otherwise.
Samesubnettype returns non-zero if subnets a and b are of the same address family, and 0 otherwise.
SEE ALSO inet(3), ipsec_initaddr(3)HISTORY
Written for the FreeS/WAN project by Henry Spencer.
28 Nov 2000 IPSEC_SAMEADDR(3)