FENCE_AGENT(8)						      System Manager's Manual						    FENCE_AGENT(8)

NAME

       fence_ilo - Fence agent for HP iLO

       fence_ilo2 - Fence agent for HP iLO2 (symlink)

DESCRIPTION

       fence_ilo is an I/O Fencing agent used for HP servers with the Integrated Light Out (iLO) PCI card.The agent opens an SSL connection to the
       iLO card. Once the SSL connection is established, the agent is able to communicate with the iLO card through an XML stream.

       fence_ilo accepts options on the command line as well as from stdin. Fenced sends  parameters  through  stdin  when  it	execs  the  agent.
       fence_ilo can be run by itself with command line options.  This is useful for testing and for turning outlets on or off from scripts.

       Vendor URL: http://www.hp.com

PARAMETERS


       -a, --ip=[ip]
	      IP Address or Hostname This parameter is always required.

       -l, --username=[name]
	      Login Name This parameter is always required.

       -p, --password=[password]
	      Login password or passphrase

       -z, --ssl
	      SSL connection (Default Value: 1)

       -t, --notls
	      Disable TLS negotiation

       -r, --ribcl-version=[version]
	      Force ribcl version to use

       -u, --ipport=[port]
	      TCP/UDP port to use for connection with device (Default Value: 443)

       -4, --inet4-only
	      Forces agent to use IPv4 addresses only

       -6, --inet6-only
	      Forces agent to use IPv6 addresses only

       -S, --password-script=[script]
	      Script to retrieve password

       --ssl-secure
	      SSL connection with verifying fence device's certificate

       --ssl-insecure
	      SSL connection without verifying fence device's certificate

       -o, --action=[action]
	      Fencing Action (Default Value: reboot)

       -v, --verbose
	      Verbose mode

       -D, --debug-file=[debugfile]
	      Write debug information to given file

       -V, --version
	      Display version information and exit

       -h, --help
	      Display help and exit

       --power-timeout=[seconds]
	      Test X seconds for status change after ON/OFF (Default Value: 20)

       --shell-timeout=[seconds]
	      Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --login-timeout=[seconds]
	      Wait X seconds for cmd prompt after login (Default Value: 10)

       --power-wait=[seconds]
	      Wait X seconds after issuing ON/OFF (Default Value: 0)

       --delay=[seconds]
	      Wait X seconds before fencing is started (Default Value: 0)

       --retry-on=[attempts]
	      Count of attempts to retry power on (Default Value: 3)

ACTIONS


       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       list   List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.

       monitor
	      Check the health of fence device

       metadata
	      Display the XML metadata describing this resource.

STDIN PARAMETERS


       ipaddr IP Address or Hostname This parameter is always required.

       login  Login Name This parameter is always required.

       passwd Login password or passphrase

       ssl    SSL connection (Default Value: 1)

       notls  Disable TLS negotiation

       ribcl  Force ribcl version to use

       ipport TCP/UDP port to use for connection with device (Default Value: 443)

       inet4_only
	      Forces agent to use IPv4 addresses only

       inet6_only
	      Forces agent to use IPv6 addresses only

       passwd_script
	      Script to retrieve password

       ssl_secure
	      SSL connection with verifying fence device's certificate

       ssl_insecure
	      SSL connection without verifying fence device's certificate

       action Fencing Action (Default Value: reboot)

       verbose
	      Verbose mode

       debug  Write debug information to given file

       version
	      Display version information and exit

       help   Display help and exit

       power_timeout
	      Test X seconds for status change after ON/OFF (Default Value: 20)

       shell_timeout
	      Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       login_timeout
	      Wait X seconds for cmd prompt after login (Default Value: 10)

       power_wait
	      Wait X seconds after issuing ON/OFF (Default Value: 0)

       delay  Wait X seconds before fencing is started (Default Value: 0)

       retry_on
	      Count of attempts to retry power on (Default Value: 3)

fence_ilo (Fence Agent) 					    2009-10-20							    FENCE_AGENT(8)