I was looking at previews of XScreenSaver and the desktop froze. I am unsure how to restart the FVWM. I downloaded putty and can connect via ssh. I tried to shut the machine down by using the "shutdown -h now" command , but it will not power off.
If I knew the process number I could kill it. ... (1 Reply)
Hi,
I've a server with HP-UX 10x that when the connection with my ISP is broken, it
almost freezes. I realize when I try to connect myself from a pc with a terminal emulator, it delays 5 or 8 minutes to show me the login prompt and the applications become slow.
My question is how can I... (2 Replies)
I'm not an advanced user by any strech, that being said here is my problem:
I ran "reboot" on a sun blade 2500
When loading up it runs through the usual routine, checking disks, filesystems and then it locks up
after the following message:
*****
starting rpc services: rpcbind... (6 Replies)
platform: sunblade 100
Solaris 10.
When running a test-all from the ok prompt on this new (to me) system, it locks up at pci@1f,0/usb/c,3. It's been there for about 25 minutes.
I do have a usb keyboard and mouse attached, both are known good. There is no flash stick/ thumb drive... (0 Replies)
hi there. new problem for me!!! i have been using a Sabayon Linux 3.5 distribution and yesterday when i turned the system on it stopped responding, i mean it freeazed. i was listening to music on Audacious and suddenly the system is ice cold...baby. what to do. Since i've tried 'reiserfsck' the... (0 Replies)
Hello,
We are using Solaris 2.5.1 box. And we are accessing to Solaris from Windows xp using Cygwin/X. The connection establish without any problem and we can use desktop environment. But, sometimes later ( various between 2 minutes to 10 minutes ) Connectted desktop display is frozen. Mouse is... (4 Replies)
I have a very weird problem with the gedit 2.30.3 text editor on GNOME 2.30.2 (Ubuntu Linux 10.04 LTS):
Any and all mouse clicks and key-presses into the gedit window are summarily ignored. When I say the gedit window, I mean the gedit window proper, the window contents, not the decoration of... (1 Reply)
Hi gurus,
My Solaris version is
Solaris 10 1/06 s10s_u1wos_19a SPARC
Im getting I/O error while trying to ls -l a directory in Solaris SPARC box
the truss output from server is attached below
truss -fall -vall -wall -rall ls -la
12278/1: acl("./dat", GETACLCNT, 0,... (3 Replies)
Discussion started by: Solaris_Begin
3 Replies
LEARN ABOUT LINUX
partx
PARTX(8) System Manager's Manual PARTX(8)NAME
partx - tell the Linux kernel about the presence and numbering of on-disk partitions
SYNOPSIS
partx [-a|-d|-s] [-t TYPE] [-n M:N] [-] disk
partx [-a|-d|-s] [-t TYPE] partition [disk]
DESCRIPTION
Given a device or disk-image, partx tries to parse the partition table and list its contents. It optionally adds or removes partitions.
The disk argument is optional when a partition argument is provided. To force scanning a partition as if it were a whole disk (for example
to list nested subpartitions), use the argument "-". For example:
partx --show - /dev/sda3
This will see sda3 as a whole-disk rather than a partition.
This is not an fdisk program -- adding and removing partitions does not change the disk, it just tells the kernel about the presence and
numbering of on-disk partitions.
OPTIONS -a, --add
Add the specified partitions, or read the disk and add all partitions.
-b, --bytes
Print the SIZE column in bytes rather than in human-readable format.
-d, --delete
Delete the specified partitions or all partitions.
-g, --noheadings
Do not print a header line.
-l, --list
List the partitions. Note that all numbers are in 512-byte sectors. This output format is DEPRECATED in favour of --show. Don't
use it in newly written scripts.
-o, --output list
Define the output columns to use for --show and --raw output. If no output arrangement is specified, then a default set is used.
Use --help to get list of all supported columns.
-r, --raw
Use the raw output format.
-s, --show
List the partitions. All numbers (except SIZE) are in 512-byte sectors. The output columns can be rearranged with the --output
option.
-t, --type type
Specify the partition table type -- aix, bsd, dos, gpt, mac, minix, sgi, solaris_x86, sun, ultrix or unixware.
-n, --nr M:N
Specify the range of partitions. For backward compatibility also the format <M-N> is supported. The range may contain negative
numbers, for example "--nr :-1" means the last partition, and "--nr -2:-1" means the last two partitions. Supported range specifi-
cations are:
<M> Specifies just one partition (e.g. --nr 3).
<M:> Specifies lower limit only (e.g. --nr 2:).
<:N> Specifies upper limit only (e.g. --nr :4).
<M:N> or <M-N> Specifies lower and upper limits (e.g. --nr 2:4).
EXAMPLES
partx --show /dev/sdb3
partx --show --nr 3 /dev/sdb
partx --show /dev/sdb3 /dev/sdb
All three commands list partition 3 of /dev/sdb.
partx --show - /dev/sdb3
Lists all subpartitions on /dev/sdb3 (the device is used as whole-disk).
partx -o START -g --nr 3 /dev/sdb
Prints the start sector of partition 5 on /dev/sda without header.
partx -o SECTORS,SIZE /dev/sda5 /dev/sda
Lists the length in sectors and human-readable size of partition 5 on /dev/sda.
partx --add --nr 3:5 /dev/sdd
Adds all available partitions from 3 to 5 (inclusive) on /dev/sdd.
partx -d --nr :-1 /dev/sdd
Removes the last partition on /dev/sdd.
SEE ALSO addpart(8), delpart(8), fdisk(8), parted(8), partprobe(8)AUTHORS
Davidlohr Bueso <dave@gnu.org>
Karel Zak <kzak@redhat.com>
The original version was written by Andries E. Brouwer <aeb@cwi.nl>.
AVAILABILITY
The partx command is part of the util-linux package and is available from ftp://ftp.kernel.org/pub/linux/utils/util-linux/.
1 Feb 2011 PARTX(8)