I have a very old hp rp2450 running 11i2 that I had to power off. When turning it back on it hangs with the following message. Would booting into SUM get me any further? I've never used SUM, so I'm asking before I go down that rabbit hole.
Thanks for the help.
Code:
#
## extra content removed
#
Processor is booting from first available device.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Trying Primary Boot Path
------------------------
Booting...
Boot IO Dependent Code (IODC) revision 1
HARD Booted.
ISL Revision A.00.44 Mar 12, 2003
ISL booting hpux
Boot
: disk(0/0/1/1.15.0.0.0.0.0;0)/stand/vmunix
14381056 + 4435968 + 4290184 start 0x230ee8
#
## extra content removed
#
msgcnt 2 vxfs: mesg 001: vx_nospace - /dev/vg00/lvol10 file system full (1 block extent)
msgcnt 1 vxfs: mesg 001: vx_nospace - /dev/vg00/lvol10 file system full (1 block extent)
VxVM WARNING V-5-1-9668 CmdLog: write failed - No space left on device
VxVM WARNING V-5-1-9668 CmdLog: write failed - No space left on device
HP-UX Start-up in progress
__________________________
Configure system crash dumps ........................................ OK
VxVM INFO V-5-2-3360 VxVM device node check ......................... OK
VxVM INFO V-5-2-3362 VxVM general startup ........................... OK
VxVM INFO V-5-2-3366 VxVM reconfiguration recovery .................. OK
Mount file systems .................................................. OK
Setting hostname .................................................... OK
Start Kernel Logging facility ....................................... OK
Set privilege group ................................................. N/A
Display date ........................................................ N/A
Copy processor logs to /var/tombstones .............................. OK
Save system crash dump if needed .................................... N/A
Start evp ........................................................... OK
Enable auxiliary swap space ......................................... OK
Start syncer daemon ................................................. OK
Start Utmp Daemon : manages User Accounting Database ................ OK
Configure Loopback interfaces (lo0) .................................
msgcnt 3 vxfs: mesg 001: vx_nospace - /dev/vg00/lvol10 file system full (1 block extent)
Hi All,
There was a background process running on a Solaris 2.8 machine, and appeared to have filled all available disk-space. I done a killall, and upon re-booting found that the file system had filled up, and will not boot as normal as a result. For example, I'm getting
/usr/adm/messages: No... (8 Replies)
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
Hi,
I have an SGI workstation running on Irix 6.5. A few days ago the system started giving messages that the root directory is full. Even before I could find out how to clean up the root directory, the system crashed and does not boot anymore. Can anyone help me on how I can get the system to... (1 Reply)
Hello:
NOOB here. I attempted to use smit mkcd. Failed on first attempt, not enough space. 2nd attempt tried to place iso on /usr, not enough space there. Cleanup ran for about 5 minutes after aborting. Now AIX won't boot. LCD display on 7029-6E3 says: 0517 MOUNT /USR. Attempted to boot from CD... (11 Replies)
Hey all,
What do you think mostly happened in the following situation?
I have a Red Hat 5.5 server. Someone, somehow, managed to get two .nfs000.... type files that totaled over a terabyte in size. I removed them and thought things were back to normal. Then I started getting complains from... (2 Replies)
We have an issue here:
The libc.so.6 file (link) is corrupted and it causes the system unbootable. It even doesn't boot to single user mode. How can we boot the system to fix the library file? Or is there any other solutions for this issue?
Here are some boot messages:... (6 Replies)
Hi All,
I have successfully backup & restore (using tar) one of my Debian Lenny Servers.
On the restore server (standby machine), everytime i have to erase the disk & extract the tar backup.
I want to extract the tar on the running restore server on a directory for e.g /systembackup-01,... (11 Replies)
Dear all
I have a SPARC solaris 5.10 system. I did something very silly while editing the vfstab file I modified the root (/) filesystem mount point setting to be /dev/dsk/c0t0d0s0 /dev/rdsk/c0t1d0s0 notice the difference.
When I rebooted the system it fails with a service called... (2 Replies)
On RHEL5 from within both a shell (sh->bash) and a csh script curl fails with a "curl: (6) Couldn't resolve host 'application'" error.
This is the result whether run as a command at the shell and/or c-shell prompt and curl also fails with the same error when the scripts are "source'd" at the... (5 Replies)
Discussion started by: GSalisbury
5 Replies
LEARN ABOUT HPUX
vxpfto
vxpfto(1M)vxpfto(1M)NAME
vxpfto - set Powerfail Timeout (pfto)
SYNOPSIS
vxpfto -g diskgroup -t timeout
vxpfto [-g diskgroup] -t timeout volume_list
vxpfto [-g diskgroup] -o pftostate={enabled|disabled}
vxpfto [-g diskgroup] -o pftostate={enabled|disabled} volume_list
DESCRIPTION
Powerfail Timeout is an attribute of a SCSI disk connected to an HP-UX host (see the pfto(7) man page). The vxpfto command sets the Power-
fail Timeout interval on a set of Volume Manager disks, either all disks in a disk group, or all disks underlying the volumes listed.
The first form of the command sets the same PFTO value for all the disks in the specified VxVM diskgroup.
In the second form, all disks underlying the given list of volumes are selected, optionally restricted by the disk group specified with the
-g option. If you specify a diskgroup, any volume in the list not belonging to the diskgroup is ignored.
Use the -o pftostate option to disable or enable PFTO. By default, PFTO is enabled. You can enable PFTO either on all disks in a disk
group, or on all disks underlying the volumes listed.
If you invoke vxpfto without arguments, it displays a usage message.
OPTIONS -g diskgroup
Specifies the disk group for the operation, either by disk group ID or by disk group name.
-o pftostate={enabled|disabled}
Enables or disables the use of PFTO for IO.
-t timeout
Specifies the PFTO value in seconds. The value must be zero or a positive integer. Zero represents the system default PFTO
value. The default value depends on the disk driver controlling the disk device.
volume_list
A list of VxVM volume names. List items must be separated by white-space.
EXIT CODES
vxpfto returns a zero if successful. If it encounters an error, vxpfto exits and displays a message on standard error. Defined exit codes
are:
0 Success.
1 No PFTO value specified.
2 No diskgroup or volume list specified.
3 Illegal PFTO value specified.
EXAMPLES
Set the PFTO value on all disks in disk group testdg to 100 seconds:
vxpfto -t 100 -g testdg
Set the PFTO value to 50 seconds on all disks underlying volume01 and volume02 in disk group testdg:
vxpfto -t 50 -g testdg volume01 volume02
Set the PFTO value to 300 seconds on all disks underlying volume01 and volume02, even though they are not in the same disk group:
vxpfto -t 300 volume01 volume02
Disable PFTO on all disks in disk group testdg:
vxpfto -g testdg -o pftostate=disabled
Enable PFTO on all disks underlying volume01 and volume02i in disk group testdg:
vxpfto -g testdg -o pftostate=enabled volume01 volume02
SEE ALSO vxdisk(1M), pfto(7)VxVM 5.0.31.1 24 Mar 2008 vxpfto(1M)