01-24-2014
I agree with Bakunin that you leave us all guessing which isn't good for proper diagnosis.
However, given the scenario you describe, I'm going to guess what the problem is. Absolutely, no guarantees though.
The thing that's changed is your internet connection and the router. Everything worked at the previous site.
It's quite possible that your server is configured to be the gateway (and proxy) for internet access and is configured to be a DHCP server.
Almost all new routers are configured to provide the DHCP service by default but you can only have one DHCP server for a site.
So probably your new router is a DHCP server, is providing the workstations with ip address leasing and gateway/dns information, and so the workstations can access the internet. The server has the old gateway ip address still hard configured but that's not there anymore so it can't access the internet.
If I'm correct you need to stop the new router being a DHCP server and then reboot all your workstations. Also, configure the new router's ip address into the server. Also, check the DNS service is configured properly for the new internet connection/provider.
I repeat, I am just completely guessing here. Hope that helps.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I just moved away from a T3 line back to a dial up I just wanted to know would a P200 with 64meg and a 4 gig hard drive be ok for a linux server for an additional 3 pcs all running win98. I will be dialing into an isp using a 56k v90 modem.
Any support or help will be great. (3 Replies)
Discussion started by: izrailov
3 Replies
2. Shell Programming and Scripting
Hi,
I would like to connect UNIX server to UNIX server through shell scripts
and i have some concepts . But i am totally confused how to connect UNIX
server to UNIX server throuth running a script. It will be greatful to me if
any buddy will help me.
Thanks in advance.
Phatan:) (2 Replies)
Discussion started by: phatan
2 Replies
3. Shell Programming and Scripting
Hi,
I would like to connect UNIX server to UNIX server through shell scripts
and i have some concepts . But i am totally confused how to connect UNIX
server to UNIX server throuth running a script. It will be greatful to me if
any buddy will help me.
with simple example please.
Thanks in... (2 Replies)
Discussion started by: phatan
2 Replies
4. SuSE
:mad: iam connecting to internet using gprs ccellphone in windows
in linux how to connect to gprs internet
presently iam using linux distribution opensuse 10.3
my phone is LGB2070
using com1 port
the driver for windows is in .inf format
... (4 Replies)
Discussion started by: seshumohan
4 Replies
5. Linux
Hi everyone. I use modem(ethernet adaptor and realtek driver) but after installing ubuntu, I had no chance of installing internet so I decided to look for another linux distribution. Sorry for bothering you, but what do you think is the easiest linux distribution to connect to internet? (1 Reply)
Discussion started by: Sechki
1 Replies
6. IP Networking
hi i have linux server connected to internet through a switch/router. i have opened a port on the router and i am able to connect to the server if iptables is off. but when it is on i cant.
i want to create a rule in iptables so that it accepts packets coming from a particular datacard. it... (7 Replies)
Discussion started by: u.n.i.x
7 Replies
7. Red Hat
What all is required so that I can use internet on my Linux OS
My OS: Red Hat Fedora
version: 2.6
I have to connect via my Nokia cell phone via cable.
This way only I had been using internet on my Windows OS.
If any software is required to install on my UNIX for internet, then I don't... (1 Reply)
Discussion started by: ravisingh
1 Replies
8. IP Networking
How to enable internet on my Linux OS
My OS: Red Hat Fedora
Release 9 (Sulphur)
version: 2.6
I have to connect via my Nokia cell phone via cable.
This way only I had been using internet on my Windows OS.
If any software is required to install on my UNIX for internet, then I don't have any. If... (14 Replies)
Discussion started by: ravisingh
14 Replies
9. Shell Programming and Scripting
I am trying to connect to Windows server via Linux server through a script and run two commands " cd and ls " But its giving me error saying " could not start the program" followed by the command name i specify e g : "cd"
i am trying in this manner "
ssh username@servername "cd... (5 Replies)
Discussion started by: sunil seelam
5 Replies
10. Linux
Hi my name is Manju.
->I have configure the two way authentication on my linux server.
->Now I am able to apply two way authenticator on particuler user.
->Now I want to map this linux server to my AD server.
->Kindly tell me how to map AD(Active Directory) with this linux server.
... (0 Replies)
Discussion started by: manjusharma128
0 Replies
LEARN ABOUT DEBIAN
multinet
MULTINET(8) System Manager's Manual MULTINET(8)
NAME
multinet - Connect to a Multinet* DECnet over IP server
SYNOPSIS
multinet [options] <local-decnet-addr> <remote-host>
DESCRIPTION
This utility creates a tapX device and copies all the DECnet packets from that over IP to a remote Multinet* server. It provides a way to
connect a Linux box to a remote VMS machine over an IP-only network. Using Linux routing it should be possible to connect DECnet networks
over the internet using this technique.
local-decnet-addr DECnet node address of the tapX interface. This need not be the same as the address used on other interfaces but it might
be less confusing if it is.
remote-host IP address or host name of the remote Multinet server. If you send a HUP signal to the process it will lookup this name again,
so you don't need to restart the server if the remote node changes its IP address.
*Multinet is a product, and probably a trademark, of Process Software.
http://www.process.com and is available free for hobbyist use.
The protocol used here was reverse engineered by Mark Berryman and Christine Caulfield.
OPTIONS
-v Be verbose and dump packet contents to stderr
-1 Advertise as a level 1 router
-2 Advertise as a level 2 router (default)
-D Make the tapX device into the default DECnet device. This will force all traffic to non-local nodes down the Multinet link. IMPOR-
TANT: Due to a kernel bug you should not use this option unless you are using a Linux kernel version 2.6.17 or later.
-p priority
Router priority. Default is 64
-P port
Port to talk to Multinet on (default is 700). Ony change this if you know the Multinet server is listening on a different port
-m MTU Maximum size of packets. (default 576)
-t secs
Timeout for IP connections. If no traffic is seen on the IP connection after this time then the daemon will attempt to restart it.
-H hello timer
How often HELLO messages are sent (default 60) in seconds.
EXAMPLES
multinet -1 -D 3.2 zarqon.tykepenguin.com
SEE ALSO
dnroute(8), ip(8)
DECnet utilities March 30 2006 MULTINET(8)