Yes, both database size are exactly same, infact it is a clone of the production environment, the min max paging space and other parameters are also same.... everything is same. DATA, DATABASE, Parameters, OS,
only difference
ORADB = Production Environment runs on P4 and Oracle is on SAN = report take 25 minutes
CloneDB = Clone Environment runs on P5 and Oracle is on internal Disks = report takes 1 hour and 15 minutes
This way it sounds more logical, because SAN disks are (in most cases) much faster than physical disks. They have usually a lot more IOPS and more throughput bandwidth, because a lot of different reasons: stripesets, caching controllers, buses with higher bandwidth, ....
Your systems seem not to have the same amount of memory at all:
Further this looks dubious:
whereas:
Not the value in itself is problematic, but the huge difference. Monitor the value closely over time, if it increases heavily you have found a potential bottleneck. If it stays at this level it is perhaps an artefact of some temporary memory shortness.
Finally, the tuning parameters seem to be different (compare "maxperm" and "minperm" in the different outputs, probably others are different too). You should run "vmo -a" (and the other tuning utilities, "schedo", "ioo", "no") on both machines to investigate other differences. What good values for maxperm and minperm would be is hard to suggest because it depends heavily on the (detailed) OS version which we do not know.
Another supposition (which would have to be proven by facts) of mine is that the faster processor is not needed in the special kind of report you run and therefore contributes nothing to some faster execution, whereas the disks contribute heavily.
Hi,
My HP-UX has some errors to wake up and one of them are:
/dev/vg00/rlvol4 BAD CYLINDER GROUPS
I have thought that my hdd has physical problems, my question is:
Exists a program to check the hdd physically and to repair it...
Thanks.... (0 Replies)
Hi theres
I am quite new to solaris, I have 40GB HDD in which I have created only 10 GB partition & installed solaris 10. Now I want to add another 10GB from remaining 30GB space. I tried this with format utility but I get stuck after I create fdsik partition. After creating this I cant... (1 Reply)
I am adding a new HDD to a Unix Sco Release 5 webserver.
I consider myself a windows pro. However, growing up in the late 90's means I have little Unix knowledge. I know the HDD has to be mounted and formatted correctly. Can anyone give me any advice on this?
A dummy's guide to installing a... (5 Replies)
Hi All,
I would like to share this incident that happened the other day.
I have a question with this, https://www.unix.com/aix/64921-create-new-vg-san-rename-fs.html
And I thought it's related to the above link but the problem was the ibm san 4300 cache battery was dead and I need to click... (2 Replies)
Over the last few months the HDD spins louder and louder, so I fiqured its time to replace the HDD. Its been running 24/7/365 since 98 :eek:. yes i said since 98 :D
I have an IBM system 43P Model 240. 233 MHz. running AIX Version 4.
The current HDD is an IBM DGHS COMP IEC -950
FRU PN#... (5 Replies)
All,
I am a complete grasshopper when it comes to Unix, so here goes. I have a Solaris 9 server, running two 36GB HDD in a mirrored configuration. I am running low on disk space, and have purchased an additional 145GB HDD. Can anyone point me in the direction to some documentation on how to... (1 Reply)
I need to get an external HDD for a SUN server running Solaris 10. The Western Digital that I have will not recognize and when I went looking for drivers WD only has them for MAC and Windows. Is there a External HDD that is known to work with Unix? (24 Replies)
Hi,
This is follow up to the post https://www.unix.com/aix/233361-san-disk-appearing-double-aix.html
When I connected Pseries Machine HBA Card ( Dual Port ) directly to the SAN Storage DS4300 , I was able to see Host Port Adapter WWN numbers , although I was getting this message... (2 Replies)
Greeting All
Diag tool HDD clone SCO 5 + Oracle 7 DB ( IBM T30 )
I am new to this forum and my knowledge on computers OS is average .
I have just acquired a factory diag tool for BMW/RR/MINI from a retired mechanic. Its runs on a IBM T30 laptop with a Unix/Oracle DB system. Sco 5... (8 Replies)
Discussion started by: bmw635
8 Replies
LEARN ABOUT DEBIAN
ocf_heartbeat_oracle
OCF_HEARTBEAT_ORACLE(7) OCF resource agents OCF_HEARTBEAT_ORACLE(7)NAME
ocf_heartbeat_oracle - Manages an Oracle Database instance
SYNOPSIS
oracle [start | stop | status | monitor | meta-data | validate-all]
DESCRIPTION
Resource script for oracle. Manages an Oracle Database instance as an HA resource.
SUPPORTED PARAMETERS
sid
The Oracle SID (aka ORACLE_SID). (unique, required, string, no default)
home
The Oracle home directory (aka ORACLE_HOME). If not specified, then the SID along with its home should be listed in /etc/oratab.
(optional, string, no default)
user
The Oracle owner (aka ORACLE_OWNER). If not specified, then it is set to the owner of file $ORACLE_HOME/dbs/*${ORACLE_SID}.ora. If this
does not work for you, just set it explicitely. (optional, string, no default)
ipcrm
Sometimes IPC objects (shared memory segments and semaphores) belonging to an Oracle instance might be left behind which prevents the
instance from starting. It is not easy to figure out which shared segments belong to which instance, in particular when more instances
are running as same user. .sp What we use here is the "oradebug" feature and its "ipc" trace utility. It is not optimal to parse the
debugging information, but I am not aware of any other way to find out about the IPC information. In case the format or wording of the
trace report changes, parsing might fail. There are some precautions, however, to prevent stepping on other peoples toes. There is also
a dumpinstipc option which will make us print the IPC objects which belong to the instance. Use it to see if we parse the trace file
correctly. .sp Three settings are possible: .sp - none: don't mess with IPC and hope for the best (beware: you'll probably be out of
luck, sooner or later) - instance: try to figure out the IPC stuff which belongs to the instance and remove only those (default; should
be safe) - orauser: remove all IPC belonging to the user which runs the instance (don't use this if you run more than one instance as
same user or if other apps running as this user use IPC) .sp The default setting "instance" should be safe to use, but in that case we
cannot guarantee that the instance will start. In case IPC objects were already left around, because, for instance, someone mercilessly
killing Oracle processes, there is no way any more to find out which IPC objects should be removed. In that case, human intervention is
necessary, and probably _all_ instances running as same user will have to be stopped. The third setting, "orauser", guarantees IPC
objects removal, but it does that based only on IPC objects ownership, so you should use that only if every instance runs as separate
user. .sp Please report any problems. Suggestions/fixes welcome. (optional, string, default instance)
clear_backupmode
The clear of the backup mode of ORACLE. (optional, boolean, default false)
shutdown_method
How to stop Oracle is a matter of taste it seems. The default method ("checkpoint/abort") is: .sp alter system checkpoint; shutdown
abort; .sp This should be the fastest safe way bring the instance down. If you find "shutdown abort" distasteful, set this attribute to
"immediate" in which case we will .sp shutdown immediate; .sp If you still think that there's even better way to shutdown an Oracle
instance we are willing to listen. (optional, string, default checkpoint/abort)
SUPPORTED ACTIONS
This resource agent supports the following actions (operations):
start
Starts the resource. Suggested minimum timeout: 120.
stop
Stops the resource. Suggested minimum timeout: 120.
status
Performs a status check. Suggested minimum timeout: 5.
monitor
Performs a detailed status check. Suggested minimum timeout: 30. Suggested interval: 120.
validate-all
Performs a validation of the resource configuration. Suggested minimum timeout: 5.
methods
Suggested minimum timeout: 5.
meta-data
Retrieves resource agent metadata (internal use only). Suggested minimum timeout: 5.
EXAMPLE
The following is an example configuration for a oracle resource using the crm(8) shell:
primitive p_oracle ocf:heartbeat:oracle
params
sid=string
op monitor depth="0" timeout="30" interval="120"
SEE ALSO
http://www.linux-ha.org/wiki/oracle_(resource_agent)
AUTHOR
Linux-HA contributors (see the resource agent source for information about individual authors)
resource-agents UNKNOWN 03/09/2014 OCF_HEARTBEAT_ORACLE(7)