The RedHat 6 Technical Notes suggest to try to boot the kernel with the parameter
so you might try that. But it looks to me like you have broken hardware. If that kernel parm doesn't work I would lean toward a hardware problem.
Hello there!
I have a RS-6000 7043-140 machine with AIX version 4.1.5, that is
working for almost 8 years now. It has a tty monitor. My problem
started when I upgraded my machine to install a gxt250 graphics adapter
card together with a 15" AOC VGA Monitor, logitech keyboard and mouse, ... (2 Replies)
I have an ultra 10 system, and am trying to install and verify a previously cloned hard drive, to make sure it works, that it really is a duplicate of the hard drive currently on an other server, etc.
I plugged in this cloned hard drive as master, only drive in the system.
No network LAN... (2 Replies)
Hi, I have a Unix box running HP-UX 10.20 and it suddenly won't boot. Every time it goes down the boot checklist, it hangs on "NFS client subsystem" and just continues to say busy/wait. I have read something about the /etc/auto_master but don't quite understand what has to happen to fix it. ... (4 Replies)
Why is one of my blade hanging and does nothing after trying to boot from CD???
==================
I tried to press 1....JS20 does not support SMS menu
Here's what I see after 30 minutes...
-------------------------------------------------------------------------------
... (0 Replies)
Hi guys,
i explain my problem:
I've FC10 64bit installed on a server Dell R410.
When i boot the system with eth0 or eth1 linked (only one eth linked), all work fine and the system start normally.
When i boot the system with eth0 + eth1 linked,
the system hang when the rpcind service... (1 Reply)
Hi folks,
I had problems trying to install SCO OpenServer 6 on a PC with no floppy drive and a SATA CD drive.
Eventually after advice received on this forum last week, I adopted a different approach by fitting the LSI HBA RAID adapter and associated disks into an older PC that does have CD and... (4 Replies)
Hi Experts,
I am facing one problem here which is one process always stuck in running state which causes the other similar process to sleep state . This causes my system in hanged state.
On doing cat /proc/<pid>wchan showing the "__init_begin" in the output.
Can you please help me here... (0 Replies)
Hi Experts,
I am facing one problem here which is one process always stuck in running state which causes the other similar process to sleep state . This causes my system in hanged state.
On doing cat /proc/<pid>wchan showing the "__init_begin" in the output.
Can you please help me here... (1 Reply)
Hi Experts,
I am facing one problem here which is one process always stuck in running state which causes the other similar process to sleep state . This causes my system in hanged state.
On doing cat /proc/<pid>wchan showing the "__init_begin" in the output.
Can you please help me here... (6 Replies)
Discussion started by: naveeng
6 Replies
LEARN ABOUT HPUX
xmtransfersetparameters
XmTransferSetParameters(library call) XmTransferSetParameters(library call)
NAME
XmTransferSetParameters -- A toolkit function that establishes parameters to be passed by the next call to XmTransferValue
SYNOPSIS
#include <Xm/Transfer.h>
void XmTransferSetParameters(
XtPointer transfer_id,
XtPointer parm,
int parm_fmt,
unsigned long parm_length,
Atom parm_type);
DESCRIPTION
XmTransferSetParameters establishes a parameter definition. Your application calls XmTransferSetParameters just before calling XmTransfer-
Value, and only if XmTransferValue needs to transfer a value containing a parameter.
transfer_id
Specifies a unique indentifier for the data transfer operation. The value must be the same as the value of the transfer_id mem-
ber of the XmDestinationCallbackStruct passed to the XmNdestinationCallback procedure.
parm Specifies parameters to be passed to the conversion routine (and the XmNconvertCallback procedures, if any) of the widget that
owns the selection. The type and length of parameters are target-specific. If the target takes no parameters, the value is
NULL.
parm_fmt Specifies whether the data in parm should be viewed as a list of 8-bit, 16-bit, or 32-bit quantities. Possible values are 0
(when parm is NULL), 8, 16, and 32.
parm_length
Specifies the number of elements of data in parm, where each element has the number of bits specified by parm_fmt. When parm is
NULL, the value is 0.
parm_type Specifies the type of parm.
RELATED XmTransferSendRequest(3), XmTransferStartRequest(3), and XmTransferValue(3).
XmTransferSetParameters(library call)