Sometime i see that the boot process hangs.
I am using rhel 6.2.
At that time in the console i see
HTML Code:
Probing EDD (edd=off to disable)...
SSH service seems to be started but i can't login...
ssh logs (last lines) in verbose mode level 3:
HTML Code:
debug2: we did not send a packet, disable method
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /root/.ssh/identity
debug3: no such identity: /root/.ssh/identity
debug1: Offering public key: /root/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug3: Wrote 368 bytes for a total of 1477
In /var/log/messages i see:
Code:
Jan 14 10:56:16 0-10 ntpd[3732]: kernel time sync status 2040
Jan 14 10:56:16 0-10 ntpd[3732]: frequency initialized 16.732 PPM from /var/lib/ntp/drift
Jan 14 10:56:19 0-10 mlogd[4230]: recv buffer size of unix domain data socket: 8192000
Jan 14 10:56:19 0-10 mlogd[4230]: send buffer size of inet domain data socket: 8192000
Jan 14 10:56:19 0-10 mlogd[4230]: start tcp connection listener...
Jan 14 10:56:19 0-10 mlogd[4230]: accepted connection[0] from 127.0.0.1
Jan 14 10:56:19 0-10 mlogd[4230]: connection from 127.0.0.1 established
Jan 14 10:56:26 0-10 kernel: nf_conntrack: table full, dropping packet.
Jan 14 10:56:26 0-10 kernel: nf_conntrack: table full, dropping packet.
Jan 14 10:56:26 0-10 dpMgr: 6whasapi.c(414)[Info]:ha6wInitialize:create socket success, fd: 24
Jan 14 10:56:26 0-10 kernel: process `snmpd' is using obsolete setsockopt SO_BSDCOMPAT
Jan 14 10:56:26 0-10 kernel: fpn_shmem: fpn_shmem module initialized ffff88086597cbc0
Jan 14 10:56:26 0-10 kernel: VFCOUNT 0
Jan 14 10:56:26 0-10 kernel: pkp 0000:84:00.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
Jan 14 10:56:26 0-10 kernel: pcieport 0000:80:02.0: AER: Multiple Corrected error received: id=8010
Althought in a successful boot at the same point:
Code:
an 14 11:04:07 0-10 kernel: VFCOUNT 0
Jan 14 11:04:07 0-10 kernel: pkp 0000:84:00.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
Jan 14 11:04:07 0-10 kernel: pcieport 0000:80:02.0: AER: Multiple Corrected error received: id=8010
Jan 14 11:04:08 0-10 kernel: pcieport 0000:80:02.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=8010(Transmitter ID)
Jan 14 11:04:08 0-10 kernel: pcieport 0000:80:02.0: device [8086:3c04] error status/mask=00001100/00002000
Jan 14 11:04:08 0-10 kernel: pcieport 0000:80:02.0: [ 8] RELAY_NUM Rollover
Jan 14 11:04:08 0-10 kernel: pcieport 0000:80:02.0: [12] Replay Timer Timeout
Jan 14 11:04:08 0-10 kernel: pcieport 0000:80:02.0: AER: Multiple Corrected error received: id=8010
Jan 14 11:04:09 0-10 kernel: irq 16: nobody cared (try booting with the "irqpoll" option)
Jan 14 11:04:09 0-10 kernel: Pid: 0, comm: swapper Not tainted 2.6.32-220.6wind.x86_64 #1
Hello there!
I have a RS-6000 7043-140 machine with AIX version 4.1.5, that is
working for almost 8 years now. It has a tty monitor. My problem
started when I upgraded my machine to install a gxt250 graphics adapter
card together with a 15" AOC VGA Monitor, logitech keyboard and mouse, ... (2 Replies)
I have an ultra 10 system, and am trying to install and verify a previously cloned hard drive, to make sure it works, that it really is a duplicate of the hard drive currently on an other server, etc.
I plugged in this cloned hard drive as master, only drive in the system.
No network LAN... (2 Replies)
Hi, I have a Unix box running HP-UX 10.20 and it suddenly won't boot. Every time it goes down the boot checklist, it hangs on "NFS client subsystem" and just continues to say busy/wait. I have read something about the /etc/auto_master but don't quite understand what has to happen to fix it. ... (4 Replies)
Why is one of my blade hanging and does nothing after trying to boot from CD???
==================
I tried to press 1....JS20 does not support SMS menu
Here's what I see after 30 minutes...
-------------------------------------------------------------------------------
... (0 Replies)
Hi guys,
i explain my problem:
I've FC10 64bit installed on a server Dell R410.
When i boot the system with eth0 or eth1 linked (only one eth linked), all work fine and the system start normally.
When i boot the system with eth0 + eth1 linked,
the system hang when the rpcind service... (1 Reply)
Hi folks,
I had problems trying to install SCO OpenServer 6 on a PC with no floppy drive and a SATA CD drive.
Eventually after advice received on this forum last week, I adopted a different approach by fitting the LSI HBA RAID adapter and associated disks into an older PC that does have CD and... (4 Replies)
Hi Experts,
I am facing one problem here which is one process always stuck in running state which causes the other similar process to sleep state . This causes my system in hanged state.
On doing cat /proc/<pid>wchan showing the "__init_begin" in the output.
Can you please help me here... (0 Replies)
Hi Experts,
I am facing one problem here which is one process always stuck in running state which causes the other similar process to sleep state . This causes my system in hanged state.
On doing cat /proc/<pid>wchan showing the "__init_begin" in the output.
Can you please help me here... (1 Reply)
Hi Experts,
I am facing one problem here which is one process always stuck in running state which causes the other similar process to sleep state . This causes my system in hanged state.
On doing cat /proc/<pid>wchan showing the "__init_begin" in the output.
Can you please help me here... (6 Replies)