I am experiencing a problem where under a dial condition I am experiencing packet loss, which is failrly normal, but the response to the packet loss is taking bewteen 6 and 10 seconds. Could someone please advise what the industry standard is on the response time under a packet loss senario. (1 Reply)
Hi,
When i try this command
ping ukblx151.ukhx.astrazeneca.net -n 3 | grep icmp
it gives following error :mad::
0821-077 ping: illegal packet size.
But when i give command
ping ukblx151.ukhx.astrazeneca.net
It returns correct output.:D
Could you please help? (2 Replies)
I have 4 network ports on our T5240 sun server.
all but 1 gives packet losses (nxge1)
nxge0 gives on average 50% packet loss, very bad.
nxge2 gives on average 1-2% packet loss.
nxge3 gives on average 20% packet loss.
Is there a tool or something to help me find the problem? (11 Replies)
how to get network packet size
I would like get network output rate(kb/sec)
I type command "netstat -i"
Ipkts Ierrs Opkts Oerrs 653387 0 678202 0
but i didn't know what is it packet size ,
how could i get it? (1 Reply)
Hi,
I am using the ce interface on my Solaris 9 server and there is significant packet loss when transmitting large packets. Does anyone have a fix for this?
----10.1.0.0 PING Statistics----
51 packets transmitted, 42 packets received, 17% packet loss
round-trip (ms) min/avg/max =... (12 Replies)
We're running Solaris 7 on FDDI n/w on an E6500 host and wish to use MTU (packet size) > 1500, more like 3072 bytes to begin with and possibly up to 4096 bytes.
Linux has /etc/network/interfaces. Does ANYONE remember the equivalent in Unix? When I do ifconfig eth0 mtu 4000, I get the error... (0 Replies)
Greetings, I'm stuck in a time warp using ancient machines from the prehistoric era that should be rightfully displayed in the Smithsonian.
We're running Solaris 7 on FDDI n/w on an E6500 host and wish to use MTU (packet size) > 1500, more like 3072 bytes to begin with and possibly up to 4096... (9 Replies)
Hi!
I'm writing an application (using BSD sockets on a Linux host) which communicates over TCP/IP with an embedded device. This embedded device has an old and real slow integrated circuit (Epson S1S6000) which handles all of the TCP/IP communication for it.
Problem is, this circuit (S1S6000)... (7 Replies)
Hello,
on Solaris ping command does not report failed packet as in i.e. Windows (Connection timeout)
Instead it reports the sequence of the sent packet:
64 bytes from 10.80.4.120: icmp_seq=11. time=36.0 ms
64 bytes from 10.80.4.120: icmp_seq=12. time=35.9 ms
64 bytes from 10.80.4.120:... (6 Replies)
Discussion started by: drbiloukos
6 Replies
LEARN ABOUT LINUX
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)