Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Script fails to run properly when run from CRONTAB
Top Forums Shell Programming and Scripting Script fails to run properly when run from CRONTAB Post 302882157 by rusman on Saturday 4th of January 2014 05:14:48 PM
Old 01-04-2014
Path doesn't matter as I am using full path anyway. This is a script for NetBackup (enterprise backup application) to run a command to gather data. The command (nbdeployutil) is a two step command. You run it first for it to gather the data and then again to generate a report. I wish I could just run it once, but it doesn't have that feature. Here is my whole script.

Code:
#!/bin/bash

#This script runs the NBU NBDEPLOYUTIL command
#to generate capacity based output in the
#form of Front End (or Protected Data) Terrabytes per site.
#This script works with NBU version 6.5.x


usermail=(users email address goes here)
hostname=`hostname`
date=`date +%m%d%Y`

#Execute the NBU nbdeployutil command and send output to a file as this command
#is a two-part command. 
/usr/openv/netbackup/bin/admincmd/nbdeployutil --gather | /bin/grep nbdeployutil > /tmp/nbdeployutil_temp.out

#Set the mail_report variable by grepping out the command to run from the temp file
mail_report=`/bin/grep report /tmp/nbdeployutil_temp.out | /bin/cut -d':' -f2`

#Execute the 'report' portion of nbdeployutil and send output to a file.
/bin/echo `$mail_report` > /tmp/nbdeployutil_temp_rpt.out

#Pull the proper information out of the temp file.
mail_report=$(/bin/cat /tmp/nbdeployutil_temp_rpt.out | /bin/awk '{print $15}')

#Mail the file to the specified users.
(/bin/uuencode "$mail_report" "$mail_report") | /bin/mailx -s "$hostname NBDEPLOY $date" $usermail
exit 0

Again, it seems to fail to execute this line properly when run from cron.
Code:
/bin/echo `$mail_report` > /tmp/nbdeployutil_temp_rpt.out

The only thing special about this is that it is executing a variable. I'm open to better ways to do this if it works. If i knew perl that would probably be that better way ;(.
 

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

recurring run of sh script in crontab

Hello gurus. I have a problem: my crontab -e is looks like this: ORACLE_SID=bla-bla * 21 * * * (sqlplus hotback/hotback @/oracle/backups/bla-bla/scripts/hotback/daily_hotback.sql) 0 19 * * * /oracle/backups/dev10g/scripts/exports/daily_exports.sh 0 1 * * *... (4 Replies)
Discussion started by: MarGur
4 Replies

2. Shell Programming and Scripting

Running script that sends an html formatted email fails when its run as cronjob

Hi Im very new at working with unix and this problem I simply can not understand. I know there are a lot of threads about problems with shell scripts behaving differently when run from a terminal and from a cronjob. I have tried everything(almost) but I still havent cracked this problem. Im... (15 Replies)
Discussion started by: Nightowl
15 Replies

3. Shell Programming and Scripting

How do i run a shell script without crontab.

Hi Folks, Could you please suggest me how to run a shell script on a solaris env without using crontab. I am actually trying to write a shell script which will grep "WORD" in the logfile andd sends a email.Thanks in advance. Thanks Sandeep. (3 Replies)
Discussion started by: sandeep anand
3 Replies

4. Shell Programming and Scripting

Script not running properly when run from Crontab

Hi I am a novice Linux/Perl user and am struggling to overcome what I am sure is a simple problem. I am using a perl program to create a shell script daily containing between 10 and 30 "at -f" commands for the same day. Then I change the file attributes to allow the file to be executed. When... (2 Replies)
Discussion started by: simoncjones
2 Replies

5. Shell Programming and Scripting

crontab fails to run script

OS is Ubuntu 8.04.3. When I run the command: /usr/bin/syslogMailer < /etc/syslog.pipes/criticalMessagesFrom a bash shell it works and i receive an email as per the script however when run from crontab it does not work. Can anyone explain why and how to fix it? /usr/bin/syslogMailer... (4 Replies)
Discussion started by: jelloir
4 Replies

6. Shell Programming and Scripting

run script through crontab using ksh

hi i have a script called test.sh. the content is ls >> crontest.txt. if i run manually it's giving output.but if i scheduled in crontab it's not giving output. crontab entry: 02 * * * * /sms5/SMSHOME/eds_sh/test.sh >> /sms5/SMSHOME/eds_sh/testfile/logfile 2>&1 I am using ksh.is there... (2 Replies)
Discussion started by: muraliinfy04
2 Replies

7. Shell Programming and Scripting

Script fails with ORA-20000 when run with su

Hi, I have a ksh script that runs as root ans issues several commands as a user differente from root as 'su <user> -c "command" ' . It works fine except for one step where the command executes sql statements. That command fails with ORA-20000. Now the strangest thing, if I place a read command... (5 Replies)
Discussion started by: naf
5 Replies

8. Shell Programming and Scripting

Script does not run properly

Hello everybody Im learning bash scrpting language and im making a script that read a file line by line and it does a comparison if in a line start with a letter or number and it will delete every ones that start with a letter. But im getting some errors First of all, this is the script's... (5 Replies)
Discussion started by: alienrunes
5 Replies

9. Shell Programming and Scripting

Bash script fails when run as file

The following bash script fails with error message: "./phpquery_KNBB_html_reader.sh: line 65: syntax error near unexpected token `done'" when do ./<scriptname> in the shell. However when I copy-paste the entire contents of the file directly into a shell environment it runs ok returning the intended... (2 Replies)
Discussion started by: BurritoSolution
2 Replies

10. Shell Programming and Scripting

Replace string works on command-line but fails when run from shell script

I wish to replace "\\n" with a single white space. The below does the job on command-line: $ echo '/fin/app/scripts\\n/fin/app/01/sql' | sed -e 's#\\\\n# #g'; /fin/app/scripts /fin/app/01/sql However, when i have the same code to a shell script it is not able to get me the same output:... (8 Replies)
Discussion started by: mohtashims
8 Replies

LEARN ABOUT CENTOS

pkgproto

pkgproto(1)							   User Commands						       pkgproto(1)

NAME

       pkgproto - generate prototype file entries for input to pkgmk command

SYNOPSIS

       pkgproto [-i] [-c class] [path1]

       pkgproto [-i] [-c class] [path1=path2...]

DESCRIPTION

       pkgproto scans the indicated paths and generates prototype(4) file entries that may be used as input to the pkgmk(1) command.

       If  no paths are specified on the command line, standard input is assumed to be a list of paths. If the pathname listed on the command line
       is a directory,	the contents of the directory is searched.  However, if input is read from stdin, a directory specified as a pathname will
       not be searched.

OPTIONS

       -i	       Ignores symbolic links and records the paths as ftype=f (a file) versus ftype=s (symbolic link).

       -c class        Maps the class of all paths to class.

OPERANDS

       path1	Pathname where objects are located.

       path2	Pathname which should be substituted on output for path1.

EXAMPLES

       Example 1: Examples of the use of pkgproto.1.

       The following two examples show uses of pkgproto and a partial listing of the output produced.

       Example 1:

       example% pkgproto /bin=bin /usr/bin=usrbin /etc=etc
       f none bin/sed=/bin/sed 0775 bin bin
       f none bin/sh=/bin/sh 0755 bin daemon
       f none bin/sort=/bin/sort 0755 bin bin
       f none usrbin/sdb=/usr/bin/sdb 0775 bin bin
       f none usrbin/shl=/usr/bin/shl 4755 bin bin
       d none etc/master.d 0755 root daemon
       f none etc/master.d/kernel=/etc/master.d/kernel 0644 root daemon
       f none etc/rc=/etc/rc 0744 root daemon

       Example 2:

       example% find / -type d -print | pkgproto
       d none / 755 root root
       d none /bin 755 bin bin
       d none /usr 755 root root
       d none /usr/bin 775 bin bin
       d none /etc 755 root root
       d none /tmp 777 root root

EXIT STATUS

       0	Successful completion.

       >0	An error occurred.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       pkgmk(1), pkgparam(1), pkgtrans(1), prototype(4), attributes(5)

       Application Packaging Developer's Guide

NOTES

       By  default,  pkgproto creates symbolic link entries for any symbolic link encountered (ftype=s). When you use the -i option, pkgproto cre-
       ates a file entry for symbolic links (ftype=f). The prototype(4) file would have to be edited to assign such file types as v (volatile),  e
       (editable), or x (exclusive directory). pkgproto detects linked files. If multiple files are linked together, the first path encountered is
       considered the source of the link.

       By default, pkgproto prints prototype entries on the standard output. However, the output should be saved in a  file  (named  Prototype	or
       prototype, for convenience) to be used as input to the pkgmk(1) command.

SunOS 5.10							    6 Nov 2000							       pkgproto(1)
All times are GMT -4. The time now is 08:43 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy