My assumption is that this is a simple device with the following output that was provided.
The STK RAID device is c0t0d0 with the problem on c0t1d0.
This appears to either be a disk with some bad blocks or a corrupt filesystem. The whole disk is not broken (yet)
To cerco,
You say you have 8 physical disks. That's good to know, but how are they arranged? Are perhaps 7 in a RAID and one is not? From the cylinder numbers, it would almost suggest that you have 5 in a RAID at target zero and 3 as a simple LUN (no protection) at target one, but I can't be sure on the numbers.
I'm guessing that there must be a management tool for the array somewhere, hopefully not part of the server OS, else how would one boot first time to allocate the array? What does that tell you about the arrangement of the disks/LUNs?
What output do you get from the suggestion to analyse the LUN from MadeInGermany? It will take a while to run. It might just be that we have to use fsck and read an alternate superblock, but let's not go that way just yet. It's probably best to find out what we can first before taking action.
Hi
I need to access files from a specific folder of a Linux system from an another Linux System Remotely.
I know how to, Export a folder on One SCO System & can access the same by using Import via., NFS in the Sco Unix SVR4 System using the scoadmin utility.
Also, I know to use mount -t ... (2 Replies)
Would anyone know how to get a directory listing of all files in a directory as well as all the files in their respective subdirectories and save the listings to a file? I realize this is tricky. (12 Replies)
I noticed that I have a print job that is hung up (lpstat -o) due to a broken printer. Is there a way to re-route the printed information into a text file? Or does it exist somewhere in UNIX as a text file? (5 Replies)
I have a CentOS release 5.2 (Final)host running kernel 2.6.18-92.el5 with at raid 10 that had two mirrored drives fail. The drives were re-inserted and now the raid shows healthy (for now). I tried to mount but got an Input/output error. I then attempted a fsck:
fsck.gfs2 -y /dev/vg_01/uss_vol... (0 Replies)
hi all,
i want to know y kernel is giving access for multiple users to access a file when one user may be the owner is executing that file. Because other user can manipulate that file when the other user is executing that file, it will give the unexpected result to owner . plz help me... (1 Reply)
Hi
Good Day, i would like to ask for further info about my problems experiencing this evening. Im a PPP0 connection in the internet using 3G located in asia pacific region.i had this problem this evening in my INTERNET connections that there are some sites i can't open example ( Gizmodo.com,... (2 Replies)
Hi All,
I want to configure samba share permission so that only directory creator/owner has a read and write permission and other users should not have any read/write access to that folder.Will that be possible and how can this be achieved within samba configuration.
Regards,
Sahil (1 Reply)
Dear Friends,
This is not a problem , it's a course work (UNIX scenario)....
As part of it I am searching Remote Attacks and find points as
1. Exploiting a listening service
2. Routing through Unix system that is providing security between 2 or more networks
3. User initiated Remote execution... (1 Reply)
Dear all experts here,
:)
I would like to install a proxy server on Linux server to perform solely to control the access of Web server.
In this case, some of my vendor asked me to try Squid and I have installed it onto my Linux server.
I would like know how can I set the configuration to... (1 Reply)
Discussion started by: kwliew999
1 Replies
LEARN ABOUT SUNOS
suninstall
suninstall(1M) System Administration Commands suninstall(1M)NAME
suninstall - install the Solaris operating system
SYNOPSIS
suninstall
DESCRIPTION install-solaris(1M) is now the preferred command for starting and restarting the Solaris Installation program. It should be used instead of
suninstall. suninstall is symbolically linked to install-solaris.
suninstall is a forms-based and graphical subsystem for installing the operating system.
suninstall exists only on the Solaris installation media (CD or DVD) and should only be invoked from there. Refer to the Solaris 10 Instal-
lation Guide: Basic Installations for more details.
suninstall allows installation of the operating system onto any standalone system. suninstall loads the software available on the installa-
tion media. Refer to the Solaris 10 Installation Guide: Basic Installations for disk space requirements.
USAGE
Refer to the Solaris 10 Installation Guide: Basic Installations for more information on the various menus and selections.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcdrom (Solaris instal- |
| |lation media) |
+-----------------------------+-----------------------------+
SEE ALSO pkginfo(1), install(1M), install-solaris(1M), pkgadd(1M), attributes(5)
Solaris 10 Installation Guide: Basic Installations
NOTES
It is advisable to exit suninstall by means of the exit options in the suninstall menus.
SunOS 5.10 9 Sep 2004 suninstall(1M)